C4 Fabrication Lo-Pro High Clearance Additions for 4th Gen Tacoma

The C4 Fabrication Lo-Pro High Clearance Additions are bolt-on steel wing extensions designed exclusively for the C4 Lo-Pro Winch Bumper on 2024–2026 4th Gen Toyota Tacoma. The pair weighs 20 lbs, installs with included hardware, and requires no drilling or welding. The C4 Lo-Pro Winch Bumper is sold separately. These additions are available in raw steel or powder-coated finish.

More Room Where the Trail Demands It

Approach angle determines whether a vehicle clears an obstacle cleanly or makes contact. By pushing the front corners of the bumper outward and upward, the Lo-Pro High Clearance Additions open up additional clearance for larger tires and reduce the chance of the bumper catching on rocks, ruts, or steep ledges before the tires do. That geometry change is meaningful on technical terrain where a few degrees of approach angle is the difference between a clean line and a hung-up front end.

Direct Bolt-On, No Fabrication Required

The additions bolt directly to the C4 Lo-Pro Winch Bumper using the hardware included in the kit. No drilling into the bumper, no welding, and no custom fabrication is required at the mounting points. Cutting the factory plastic bumper is required for proper fitment and clearance. The straightforward attachment process means the additions can be positioned and checked for alignment before any finish work is committed.

11-Gauge Steel Built to Last

The additions are fabricated from 11-gauge steel with 3/16-inch mounting plates. Raw-finish orders ship as bare steel and must be painted or powder coated before installation to prevent rust; C4 Fabrication recommends test-fitting before coating to confirm alignment. Selecting the powder-coated finish at checkout delivers the parts ready to install without additional prep. The Lo-Pro High Clearance Additions are made in the USA.

Features

• Direct bolt-on fitment: mounts to the C4 Lo-Pro Winch Bumper with no drilling or welding at the bumper connection points
• 11-gauge steel construction: with 3/16-inch mounting plates
• 20 lb total weight: for the pair of high-clearance additions
• Hardware included: all fasteners needed for installation are in the box
• Finish options: raw steel (requires paint or powder coat before install) or powder coat
• Made in USA

Specifications

Who This Is For and Isn't

The Lo-Pro High Clearance Additions suit 2024–2026 4th Gen Toyota Tacoma owners who already have or are purchasing the C4 Lo-Pro Winch Bumper and want to maximize front approach angle for larger tires and technical off-road terrain.

These additions do not fit the 4th Gen Tacoma TRD PRO or Trailhunter models. They are not compatible with any bumper other than the C4 Lo-Pro Winch Bumper, which is sold separately and is not included. Raw-finish orders are not ready to install without first applying paint or powder coat.

Common Questions

Is the Lo-Pro Winch Bumper included?

The C4 Lo-Pro Winch Bumper is not included with the Lo-Pro High Clearance Additions and must be purchased separately. These additions are designed to bolt onto that specific bumper only and are not compatible with other bumpers.

Do these fit the TRD PRO or Trailhunter Tacoma?

The Lo-Pro High Clearance Additions do not fit the 4th Gen Tacoma TRD PRO or Trailhunter models. They are designed for the 2024–2026 4th Gen Toyota Tacoma in other trim configurations that accept the C4 Lo-Pro Winch Bumper.

Is any drilling or welding required to install these?

No drilling or welding is required at the bumper mounting points. The Lo-Pro High Clearance Additions bolt directly to the C4 Lo-Pro Winch Bumper using the included hardware. Cutting the factory plastic bumper is required for proper fitment and clearance.

Do raw-finish orders need any prep before installation?

Raw-finish Lo-Pro High Clearance Additions ship as bare steel and must be painted or powder coated before installation to prevent rust. C4 Fabrication recommends test-fitting the additions first to confirm alignment before committing to a finish. The powder-coat option arrives ready to install.

What hardware is included?

All hardware needed to mount the Lo-Pro High Clearance Additions to the C4 Lo-Pro Winch Bumper is included in the kit. No additional fasteners are required for the bumper connection, though cutting the factory plastic bumper is a separate step the installer must perform.