BulletProof Hitches Medium Duty Sway Control Dual Ball Mount

The BulletProof Hitches Medium Duty Sway Control Dual Ball Mount is a solid-steel hitch accessory designed to connect a trailer sway control bar to a receiver hitch, with a 2" ball rated to 10,000 lbs and a 2-5/16" ball rated to 14,000 lbs. Dual side plates let you mount the sway control system on either side of the mount to suit your trailer's layout.

Ready for Sway Control in Either Direction

The dual side-plate design means the sway control ball can be positioned on the left or right side of the mount without swapping hardware. That flexibility matters when a trailer's tongue geometry or existing weight-distribution equipment limits where the sway bar can articulate. One mount covers both orientations, so you are not locked into a single trailer configuration.

Two Ball Sizes, One Mount

The combination 2" and 2-5/16" ball setup means the same mount works with travel trailers and heavier loads without requiring a separate ball mount for each coupler size. The 2" ball handles loads up to 10,000 lbs; the 2-5/16" ball handles loads up to 14,000 lbs. Switching between trailers does not require re-rigging the sway control hardware from scratch.

Solid Steel Construction with Corrosion Resistance

The mount is machined from solid steel and finished with a black powder coat. That combination resists surface rust from road spray and weather exposure over repeated towing seasons, maintaining the structural integrity the sway control system depends on for a stable hitch connection.

Features

• Dual ball combo: 2" ball rated to 10,000 lbs and 2-5/16" ball rated to 14,000 lbs on one mount
• Dual side plates: Sway control bar can be mounted on either side to suit trailer layout
• Solid steel construction: Black powder-coated finish for corrosion resistance
• Complete hardware included: 1-1/4" sway control ball, two 5/8" corrosion-resistant pins, and two R-clips
• California Prop 65: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm

Specifications

Who This Is For and Isn't

This mount suits towers who already use or plan to use a BulletProof Hitches Medium Duty Sway Control System and need a dedicated ball mount that supports both 2" and 2-5/16" couplers up to 14,000 lbs. The dual side-plate design is especially useful when trailer tongue geometry restricts sway bar placement to one side.

This mount is not a standalone sway control system; a compatible sway control bar and a receiver hitch are required separately. Receiver tube size compatibility is not specified for this mount; confirm fitment with your hitch receiver before ordering.

Common Questions

Does this mount include everything needed to set up trailer sway control?

The BulletProof Hitches Medium Duty Sway Control Dual Ball Mount includes the dual 2" and 2-5/16" ball mount with 3/4" plate, a 1-1/4" sway control ball, two 5/8" corrosion-resistant pins, and two R-clips. A compatible sway control bar and a receiver hitch are required and sold separately.

Can the sway control bar be mounted on either side of the mount?

Yes. The dual side-plate design on this ball mount allows the sway control bar to be attached on either the left or right side, accommodating trailer tongue layouts that limit articulation on one side without requiring additional hardware.

What is the maximum trailer weight this mount supports?

The 2-5/16" ball on this mount is rated to 14,000 lbs. The 2" ball is rated to 10,000 lbs. Always verify that your sway control system, receiver hitch, and vehicle tow rating are all rated at or above your actual trailer weight before towing.

Will this mount rust after exposure to road spray and weather?

The BulletProof Hitches Medium Duty Sway Control Dual Ball Mount is constructed from solid steel with a black powder-coated finish, which provides corrosion resistance against road spray and weather exposure over repeated towing seasons.