BulletProof Hitches 2-Inch Aluminum Medium Duty 6-Inch Drop Rise Hitch with Stainless Dual Ball

The BulletProof Hitches Medium Duty Aluminum Hitch accepts a 2-inch receiver tube and provides a 6-inch drop or rise, carrying up to 14,000 pounds trailer weight and 2,000 pounds tongue weight on its included stainless steel 2-5/16-inch ball. The body is machined from 6061-T6 aluminum and polished, keeping weight low without reducing tow rating. No vehicle fitment restriction is stated; confirm your receiver tube diameter and height before ordering.

Lightweight Aluminum Without a Tow-Rating Penalty

6061-T6 aluminum is a structural alloy used where strength-to-weight ratio matters. Machining the hitch body to tight tolerances means the shank seats fully in the receiver tube without slop, which reduces the rattle and micro-movement that accelerates wear on both the hitch and the receiver. The polished finish adds corrosion resistance without paint that can chip and trap moisture.

Two Ball Sizes, Eight Levels of Height Adjustment

The included hardened stainless steel dual ball carries both a 2-inch and a 2-5/16-inch ball on one head. Swapping between them takes seconds and covers the two most common trailer coupler sizes. The ball head slides along the channel in 1-inch increments across 8 positions, so the same hitch can level a trailer whether the receiver sits high on a lifted truck or lower on a stock-height vehicle. Two 5/8-inch corrosion-resistant pins and R-clips are included to lock the ball head in place.

Class IV Rating Across Both Ball Sizes

On the 2-5/16-inch ball the hitch is rated for 14,000 pounds trailer weight and 2,000 pounds tongue weight. On the 2-inch ball the trailer weight rating is 10,000 pounds with the same 2,000-pound tongue weight limit. Both ratings fall within the Class IV category, making this hitch appropriate for heavy single-axle and tandem-axle trailers within those limits.

Features

• Class IV tow rating: 14,000 lb trailer weight / 2,000 lb tongue weight on 2-5/16" ball; 10,000 lb / 2,000 lb on 2" ball
• 6061-T6 aluminum body: machined to tight tolerances, polished finish
• Stainless steel dual ball: hardened 2" and 2-5/16" ball on one adjustable head
• 8-position height adjustment: 1-inch increments along the channel
• Included hardware: two 5/8" corrosion-resistant pins and R-clips
• Total length: 10-5/8 inches

Specifications

WARNING (California Proposition 65): This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.

Who This Is For and Isn't

This hitch suits trucks and SUVs with a 2-inch receiver tube and a receiver height of 18–19 inches that need a 6-inch drop or rise to tow level. The dual-ball head covers trailers with either a 2-inch or 2-5/16-inch coupler, and the Class IV rating handles heavy single- and tandem-axle trailers within the stated limits.

This hitch does not fit 1-1/4-inch or other non-2-inch receiver tubes. It is not compatible with BulletProof Hitches hitch accessories. Only one BulletProof Locking Pin (sold separately) is compatible with this hitch's dual-ball mount; standard BulletProof locking pins for other hitches do not apply.

Common Questions

What receiver tube size does this hitch require?

The BulletProof Medium Duty Aluminum Hitch is built for a 2-inch receiver tube. It will not fit a 1-1/4-inch receiver or any other size. Confirm your vehicle's receiver diameter before ordering.

What ball sizes are included, and can I use just one?

The hitch ships with a hardened stainless steel dual-ball head carrying both a 2-inch and a 2-5/16-inch ball. The head is adjustable but the two balls are on one unit; you select which ball faces the coupler by orienting the head, not by swapping separate balls.

How many height-adjustment positions does this hitch have?

The dual-ball head slides along the channel in 1-inch increments across 8 positions, letting you match trailer coupler height to receiver height for level towing. Two 5/8-inch corrosion-resistant pins and R-clips are included to secure the head in the chosen position.

Is a locking pin included, and which one is compatible?

No locking pin is included. Only one BulletProof Locking Pin model is compatible with this aluminum hitch's dual-ball mount; standard BulletProof locking pins designed for other hitches in the lineup are not compatible. The locking pin is sold separately.

Can I use this hitch with other BulletProof Hitches accessories?

No. BulletProof Aluminum Hitches are not compatible with the BulletProof Hitches line of hitch accessories. If accessory compatibility is important for your setup, a different hitch in the BulletProof lineup may be more appropriate.