BulletProof Hitches 2.0 Inch Heavy Duty 10 Inch Drop Rise Hitch

The BulletProof Hitches 2.0" Heavy Duty 10" Drop/Rise Hitch is a Class 4 adjustable hitch shank rated for 22,000 lb towing capacity and 3,000 lb tongue weight, usable in either the drop or rise position without any reduction in rated capacity. It ships with a 2" and 2-5/16" dual ball mount, two corrosion-resistant pins, and R-clips, and is compatible with the full BulletProof Hitches accessory line.

Full Capacity in Either Direction

Most adjustable hitches reduce their rated capacity when flipped from drop to rise. The BulletProof Hitches HD2010 carries its full 22,000 lb towing capacity and 3,000 lb tongue weight in both orientations. That means a truck that tows a heavy trailer today and a lifted rig that needs a rise tomorrow can use the same hitch without downgrading to a lower weight class.

Six Adjustable Ride Heights

The dual ball mount offers six ride height positions, letting the operator dial in a level tow without swapping shanks or purchasing separate drop bars for different trailers. The included 2" and 2-5/16" balls cover the two most common trailer coupler sizes, and the corrosion-resistant pins and R-clips secure the ball position without tools.

SAE-J684 Tested

The HD2010 exceeds SAE-J684 testing requirements, the industry standard for trailer hitch assemblies. That certification matters on long hauls and rough terrain where hitch fatigue is a real failure mode: it is independent verification that the assembly has been stressed beyond its rated load, not just rated to it on paper.

Features

• Class 4 rating: 22,000 lb max towing capacity and 3,000 lb tongue weight
• Drop or rise: full rated capacity maintained in both orientations
• Six ride heights: adjustable dual ball mount with 2" and 2-5/16" balls included
• Hardware included: two corrosion-resistant pins and R-clips
• SAE-J684 compliant: tested and exceeds the standard
• Accessory compatible: works with all BulletProof Hitches accessories

Specifications

WARNING: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.

Who This Is For and Isn't

The BulletProof Hitches HD2010 suits operators who tow heavy loads (fifth-wheel trailers, equipment trailers, or large boat trailers) and need a single hitch that works at a 10-inch drop or a 10-inch rise without sacrificing Class 4 capacity. The included dual ball covers the two most common coupler sizes, making it practical for mixed fleets or households with more than one trailer.

This hitch requires a 2-inch receiver tube and will not fit 1-1/4-inch or 2-1/2-inch receivers. Confirm receiver size and receiver rating before purchase. The hitch shank diameter is 2 inches and is not compatible with Class 1, 2, or 3 receivers sized below 2 inches.

Common Questions

Does flipping the HD2010 to the rise position reduce its towing or tongue weight rating?

The BulletProof Hitches HD2010 maintains its full 22,000 lb towing capacity and 3,000 lb tongue weight rating in both the drop and rise orientations. No capacity reduction applies when the shank is inverted.

What ball sizes are included, and can the ball mount be adjusted?

The HD2010 ships with a dual ball mount carrying both a 2-inch and a 2-5/16-inch ball. The mount is adjustable across six ride height positions and is secured with the two corrosion-resistant pins and R-clips included in the box.

What receiver tube size does this hitch require?

The BulletProof Hitches HD2010 has a 2-inch shank and requires a 2-inch receiver tube. It is not designed for 1-1/4-inch or 2-1/2-inch receivers. Verify your vehicle's receiver size and its rated capacity before installing a Class 4 hitch.

Is the HD2010 compatible with other BulletProof Hitches accessories?

Yes. The BulletProof Hitches HD2010 is designed to work with the full BulletProof Hitches accessory line, so add-on components such as ball mounts, locks, and adapters from that brand are compatible with this shank.