Body Armor 4x4 3-Inch Strut Spacer Lift for GM 1500 SUV 2WD
Body Armor 4x4 3-Inch Strut Spacer Lift for GM 1500 SUV 2WD
Couldn't load pickup availability
The Body Armor 4x4 3-inch strut spacer lift is a bolt-on leveling solution for 2007–2026 GMC and Chevrolet 1500-platform 2WD trucks and SUVs, including the Silverado 1500, Sierra 1500, Yukon, Yukon XL, Tahoe, Suburban, and Avalanche, fabricated from 1/4-inch steel with Grade 10 hardware. The lift creates enough front-end clearance to run tires up to 33 inches without cutting or trimming.
Bolt-On Installation, No Cutting Required
The strut spacer mounts above the existing strut assembly using the factory bolt pattern, so no drilling, welding, or permanent modification is needed. That means a straightforward install for anyone comfortable doing basic suspension work, and it means the truck can be returned to stock ride height just as easily. That reversibility matters for owners who are leasing, plan to sell, or want to swap the spacer between compatible vehicles.
Maintains Stock Ride Quality
Because the spacer works with the factory strut rather than replacing it, the original damping characteristics are preserved. Buyers who want added ground clearance and tire fitment without giving up the on-road behavior of the stock suspension get that here: the lift adds height without introducing the harsher ride that comes with aftermarket strut replacements.
Built to Handle the Load
The spacer body is fabricated from 1/4-inch steel and fastened with Grade 10 hardware throughout. That construction is appropriate for a component that sits at the top of the strut tower and bears the full compressive load of the front suspension. A thinner or lower-grade fastener setup at this location is a real failure point, and the material spec here addresses it directly.
Features
- 3-inch front lift: raises the front end to level the stance and open clearance for larger tires
- 33-inch tire fitment: accommodates tires up to 33 inches in diameter
- 1/4-inch steel construction: fabricated from structural steel with Grade 10 fasteners
- Bolt-on installation: uses the factory strut tower bolt pattern, no permanent modification
- Reversible: can be removed to return the vehicle to stock ride height
Specifications
| Specification | Detail |
|---|---|
| SKU | 50506-GM |
| Lift Height | 3 inches (front strut spacer) |
| Material | 1/4-inch steel |
| Hardware Grade | Grade 10 |
| Max Tire Diameter | 33 inches |
| Ship Weight | 8 lb |
| Vehicle Fitment | 2007–2026 Chevrolet Silverado 1500, Tahoe, Suburban, Avalanche; GMC Sierra 1500, Yukon, Yukon XL (2WD only) |
Who This Is For and Isn't
This strut spacer suits 2WD owners of 2007–2026 Chevrolet Silverado 1500, Tahoe, Suburban, or Avalanche, and GMC Sierra 1500, Yukon, or Yukon XL who want a front lift for a leveled stance, improved approach clearance, and the ability to run tires up to 33 inches without permanently modifying the vehicle or replacing the factory struts.
This spacer does not fit 4WD variants of these platforms. It is not compatible with any other GM truck or SUV outside the specific 2007–2026 1500-series models listed. It lifts the front only and does not include a rear leveling component.
Common Questions
Does this fit the 4WD version of the Silverado 1500 or Sierra 1500?
No. The Body Armor 4x4 50506-GM strut spacer is rated for 2WD configurations only across all covered platforms: Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, Yukon XL, and Avalanche. A separate part number is required for 4WD fitment.
Will this spacer work with my factory struts, or do I need to replace them first?
The 3-inch strut spacer is designed to work with the existing factory struts. No strut replacement is required. It mounts above the strut assembly at the tower, preserving the factory damping and ride characteristics.
What tools and skills are needed to install this spacer?
Installation is bolt-on using the factory strut tower bolt pattern, so no drilling, cutting, or welding is involved. A front-end alignment is strongly recommended after any suspension height change.
Can the lift be removed if I want to return to stock height?
Yes. The Body Armor 4x4 strut spacer makes no permanent modifications to the vehicle and can be unbolted and removed to restore the factory ride height. That makes it practical for lease returns, resale, or swapping the spacer to another compatible vehicle.
What is the largest tire this lift supports?
The 3-inch strut spacer is designed to accommodate tires up to 33 inches in diameter on the covered 2007–2026 GM 1500-platform 2WD vehicles. Fitment beyond 33 inches is not stated and should not be assumed.
Share
