Body Armor 4x4 3/4 Inch D-Ring Shackle with Isolators
Body Armor 4x4 3/4 Inch D-Ring Shackle with Isolators
Couldn't load pickup availability
The Body Armor 4x4 3/4 inch D-ring shackle is a single recovery shackle rated at 4.75 tons, finished in red powder coat with removable black rubber isolators that eliminate rattle during trail use. The threaded shaft allows straightforward installation into compatible recovery points on bumpers and other mounting locations.
Rated for Real Recovery Loads
A 4.75-ton pull rating gives this shackle meaningful capacity for vehicle recovery situations where an undersized connection point is a liability. Knowing the rated load of every link in a recovery setup matters when a stuck vehicle is putting real tension on the system, and this shackle states its rating clearly so it can be matched appropriately to straps, ropes, and anchor points.
Isolators That Stay Quiet on the Trail
The black rubber isolators fit around the shackle body to prevent metal-on-metal contact with the bumper or mounting bracket, eliminating the rattle that uninsulated shackles produce on rough terrain. Because the isolators are removable, they can be taken off for cleaning or replacement without affecting the shackle itself.
Threaded Shaft Installation
The threaded shaft design means the shackle installs without additional hardware fabrication: thread it into a compatible recovery point and it seats securely. The red powder coat finish provides a corrosion-resistant surface and makes the shackle easy to locate quickly against a dark bumper or bracket.
Features
- Pull Rating: 4.75-ton capacity
- Shackle Size: 3/4 inch
- Finish: Red powder coat with black rubber isolators
- Isolators: Removable to prevent rattle
- Installation: Threaded shaft for direct mounting
Specifications
| Specification | Value |
|---|---|
| Shackle Size | 3/4 inch |
| Pull Rating | 4.75 ton |
| Finish | Red powder coat |
| Isolator Color | Black |
| Isolators | Removable rubber |
| Mounting | Threaded shaft |
| Quantity | Single shackle |
Who This Is For and Isn't
This shackle suits overlanders and off-road drivers who need a rated recovery connection point at a bumper-mounted location and want isolators to keep the shackle quiet between uses. It works for any application where a 3/4 inch threaded-shaft D-ring is the specified fitting.
This listing is for a single shackle only. Buyers needing two shackles for a matched bumper pair must purchase two units. Thread compatibility with a specific bumper or recovery point should be confirmed before ordering.
Common Questions
What is the pull rating on this shackle?
The Body Armor 4x4 3/4 inch D-ring shackle is rated at 4.75 tons. This is the figure to compare against the working load limits of any straps, ropes, or anchor points used alongside it in a recovery setup.
Are the isolators included, and can they be removed?
Black rubber isolators are included with the shackle and are designed to be removable. They fit around the shackle body to prevent rattle against the bumper or mounting bracket and can be taken off for cleaning or replacement without tools.
How does this shackle install?
The 3/4 inch D-ring shackle uses a threaded shaft that threads directly into a compatible recovery point. No additional hardware fabrication is required, though buyers should confirm that their bumper or mounting location accepts a 3/4 inch threaded-shaft fitting before purchasing.
Does this listing include two shackles?
No. This listing is for a single Body Armor 4x4 3/4 inch D-ring shackle with isolators. Buyers who need a matched pair for both sides of a bumper will need to add two units to their cart.
Share
