Addictive Desert Designs Stealth Fighter Rear Bumper for Ford F-150
Addictive Desert Designs Stealth Fighter Rear Bumper for Ford F-150
Couldn't load pickup availability
The Addictive Desert Designs Stealth Fighter is a plate steel rear bumper for 2024 and newer Ford F-150 trucks, designed to follow the factory body lines for a low-profile, flush appearance while adding clevis recovery mounts and cube light mounts. It retains the OEM tow hitch, trailer plug, and backup sensors, and installs fully bolt-on with no cutting required. The bumper is not compatible with Dual Exhaust F-150 models.
Low-Profile Steel Construction
The Stealth Fighter is built from heavy-duty plate steel and finished in a 2-stage hammer black powder coat across the main bumper body, with a satin black powder coat on the panel sections. The angled, modern plate design sits as close to flush with the truck's rear as possible, preserving departure angle and keeping the rear profile clean rather than adding bulk. After sandblasting, the powder coat is applied in two stages for durability against trail debris, moisture, and UV exposure. The bumper is manufactured in Chandler, Arizona.
Trail-Ready Recovery and Lighting Mounts
Two 1-inch reinforced clevis mounts are built into the bumper and accept soft shackles, giving the truck dedicated rear recovery attachment points without requiring add-on hardware. For supplemental lighting, two 3-inch cube light mounts are positioned on the sides of the bumper. Cube lights are not included and are sold separately; the mounts accept standard 3-inch cube light housings.
Bolt-On Install with OEM Functions Retained
The Stealth Fighter installs fully bolt-on, using the factory mounting locations on the 2024+ F-150 frame. No cutting, welding, or modification to the truck is required. The bumper is designed to retain the factory tow hitch receiver, trailer plug, and OEM backup sensors on both sensor-equipped and non-sensor models, so towing capability and parking-assist functions remain intact after installation.
Features
- Plate steel construction: heavy-duty steel with modern angled design for a low-profile, flush fit
- 2-stage hammer black powder coat: sandblasted and powder coated for corrosion and impact resistance; satin black powder coat on panel sections
- Two 3-inch cube light mounts: side-mounted positions for supplemental off-road lighting (lights sold separately)
- 1-inch reinforced clevis mounts: accept soft shackles for rear vehicle recovery
- OEM hitch, trailer plug, and sensor retention: compatible with sensor and non-sensor F-150 models
- Fully bolt-on installation: no cutting or welding; mounts to factory locations
- Made in USA: designed, manufactured, and finished in Chandler, Arizona
Specifications
| Specification | Detail |
|---|---|
| Vehicle Fitment | 2024+ Ford F-150 (all trims); not compatible with Dual Exhaust models |
| Material | Heavy-duty plate steel |
| Finish | 2-stage hammer black powder coat (main bumper); satin black powder coat (panel sections) |
| Clevis Mounts | Two 1-inch reinforced; accept soft shackles |
| Cube Light Mounts | Two 3-inch side-mounted (lights not included) |
| OEM Compatibility | Retains factory tow hitch, trailer plug, and backup sensors |
| Installation | Fully bolt-on; no cutting or welding required |
| Weight | Approx. 101 lb (shipping weight per variant data; packaged weight may differ from bare bumper weight) |
| SKU | R1901231280103 |
| Country of Origin | USA (Chandler, Arizona) |
Who This Is For and Isn't
The Stealth Fighter rear bumper suits 2024 and newer Ford F-150 owners who want a low-profile steel bumper that adds rear recovery capability and cube light mounts without sacrificing factory towing or sensor functions. It is a strong fit for overlanding and off-road builds where a clean, flush rear appearance and bolt-on simplicity are priorities.
This bumper does not fit Ford F-150 models equipped with Dual Exhaust. It is not compatible with model years prior to 2024. Cube lights are not included and must be purchased separately. Clevis mount load ratings are not specified.
Common Questions
What years and trims of Ford F-150 does this bumper fit?
The Addictive Desert Designs Stealth Fighter rear bumper fits 2024 and newer Ford F-150 trucks across all trims, with one exception: it is not compatible with F-150 models equipped with Dual Exhaust. Fitment does not extend to model years prior to 2024.
Does this bumper work with my factory backup sensors and trailer hitch?
Yes. The Stealth Fighter rear bumper is designed to retain the OEM tow hitch receiver, trailer plug, and backup parking sensors on both sensor-equipped and non-sensor 2024+ F-150 models. No relocation or deletion of factory components is required.
What does installation require, and is professional installation recommended?
The Stealth Fighter rear bumper is fully bolt-on and mounts to the factory locations on the 2024+ F-150 frame without cutting, welding, or modification. Install instructions are available from Addictive Desert Designs. Given the bumper's weight of approximately 101 lb, having a second person or a lift assist available during installation is advisable.
Are cube lights included with the bumper?
No. The Stealth Fighter rear bumper includes two 3-inch cube light mounts positioned on the sides of the bumper, but cube lights themselves are not included and must be purchased separately. The mounts accept standard 3-inch cube light housings.
Can this bumper be used for vehicle recovery?
The Stealth Fighter rear bumper includes two 1-inch reinforced clevis mounts that accept soft shackles, providing dedicated rear recovery attachment points. Clevis mount load ratings are not specified.
WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Share
