Addictive Desert Designs Phantom Winch Front Bumper for GMC Sierra 2500/3500 HD

The Addictive Desert Designs Phantom Winch Front Bumper is a steel replacement front bumper built for the 2024–2026 GMC Sierra 2500/3500 HD, combining a purpose-built hidden winch mount with integrated lighting provisions and a removable 3/16-inch aluminum skid plate. The bumper retains OEM parking sensors and adaptive cruise control, and is manufactured in the USA. One fitment covers both the 2500 and 3500 HD.

Built to Work as Hard as the Truck

The Phantom Winch Front Bumper is constructed from steel, giving the Sierra HD's front end meaningful protection against gravel, rocks, and debris on work sites and off-road trails. Steel construction at the front of a heavy-duty truck matters because the bumper is the first point of contact in a recovery scenario, a trail obstacle, or a low-speed impact. A part that flexes or cracks under load is a liability, not protection. The dual 1-inch-thick clevis mounts are integrated into the bumper structure, providing dedicated attachment points for D-rings without relying on aftermarket adapters.

A Winch Mount That Stays Hidden Until Needed

The Phantom's modular extreme-duty winch mount is recessed behind the bumper's accent pockets, keeping the front profile clean when the winch is not in use and making the mount accessible when it is. A hidden mount matters on a work truck or overland rig because it protects the winch mechanism from trail debris while preserving the bumper's low-profile appearance on road. The surrounding accent pockets allow access without removing body panels or additional hardware.

Lighting Provisions for Night Work and Trail Running

The center recessed light pocket accommodates one 20-inch light bar or up to six 3-inch cube lights, giving the driver flexibility to match the lighting setup to the use case: a single wide-throw bar for trail running or individual pods for targeted work lighting. The two side mounts accept 10-inch SR Series light bars, fitting snugly behind each side panel for a clean, integrated look. All three lighting zones are built into the bumper structure; no separate mounting brackets are required for these configurations.

Finish and OEM Integration

After sandblasting, the bumper receives a 2-stage hammer black powder coat across the main structure, with satin black powder-coated accent panels. The two-stage process builds a durable, textured surface that resists chipping and corrosion in the conditions a Sierra HD is likely to encounter. The bumper retains the truck's factory parking sensors and adaptive cruise control, so driver-assistance features remain operational after installation. The factory skid plate and factory fog lights are not retained by this bumper.

Features

• Hidden winch mount: modular extreme-duty mount recessed behind accent pockets
• Center light pocket: fits one 20-inch light bar or six 3-inch cube lights
• Side light mounts: two mounts for 10-inch SR Series light bars
• Clevis mounts: dual 1-inch-thick integrated mounts for D-rings
• Removable skid plate: 3/16-inch aluminum, heavy-duty, included
• OEM sensor retention: parking sensors and adaptive cruise control retained
• Made in USA: designed, manufactured, and tested in Chandler, Arizona

Specifications

Who This Is For and Isn't

The Phantom Winch Front Bumper suits 2024–2026 GMC Sierra 2500/3500 HD owners who want a steel front bumper with a built-in winch mount, integrated lighting provisions, and a finish that holds up to off-road and work-site use. It is a strong fit for overlanders, recovery-focused builds, and work trucks where OEM parking sensors and adaptive cruise control must remain functional.

This bumper does not fit any GMC Sierra model year outside 2024–2026, nor does it fit the 1500. It does not retain the factory skid plate or factory fog lights. Inner fender liner trimming is recommended during installation. Lights and D-rings are not included.

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Common Questions

What trucks does the Phantom Winch Front Bumper fit?

The Addictive Desert Designs Phantom Winch Front Bumper is designed to fit the 2024–2026 GMC Sierra 2500/3500 HD. It does not fit the Sierra 1500 or any Sierra HD model year outside that range.

Does the Phantom Winch Front Bumper include a winch?

The Phantom Winch Front Bumper includes a modular extreme-duty hidden winch mount integrated into the bumper structure. Whether a winch unit is also included has not been confirmed; contact TerrainVault before ordering if a winch is part of your build plan.

What lighting fits the Phantom Winch Front Bumper?

The Phantom Winch Front Bumper's center recessed pocket accepts one 20-inch light bar or up to six 3-inch cube lights. The two side mounts each accept a 10-inch SR Series light bar. Lights are not included with the bumper.

Does the Phantom Winch Front Bumper retain OEM driver-assistance features?

The Phantom Winch Front Bumper retains the GMC Sierra HD's factory parking sensors and adaptive cruise control. The factory skid plate and factory fog lights are not retained and will not transfer to this bumper.

What finish does the Phantom Winch Front Bumper have, and how durable is it?

The Phantom Winch Front Bumper is finished with a 2-stage hammer black powder coat on the main steel structure and a satin black powder coat on the accent panels. The bumper is sandblasted before coating, which prepares the surface for a finish that resists chipping and corrosion in off-road and work-site conditions.