Addictive Desert Designs Phantom Front Bumper for Ford Bronco Raptor

The Addictive Desert Designs Phantom is a low-profile, bolt-on front bumper built specifically for the 2022–2026 Ford Bronco Raptor, featuring a knife's-edge profile that follows the Raptor's factory valance and fender lines, an inset center mount for a 20-inch radius LED light bar or up to five 3-inch cube lights, and an included 3/16-inch aluminum skid plate that replaces the factory skid.

Flush Fit That Works With the Raptor's Lines

The Phantom's knife's-edge profile is shaped to sit flush against the Bronco Raptor's front end and track the factory valance and fender bodylines from every angle. A low-profile bumper that fits this precisely means no awkward gaps, no visual bulk added to the nose, and a finished look that reads as intentional rather than bolted on. For a truck with the Raptor's factory presence, that level of fitment matters as much as the hardware underneath.

Integrated Lighting Without Extra Brackets

The Phantom's inset center section accepts a single 20-inch radius LED light bar or up to five 3-inch cube lights, with the mount built into the bumper structure rather than added on afterward. Keeping the light mount integral to the bumper eliminates a separate bracket purchase, reduces the number of attachment points that can loosen off-road, and positions the light low and centered where it does the most work on trails. Lights are sold separately; the bumper provides the mounting location.

Skid Protection and OEM Sensor Retention Included

The Phantom ships with a 3/16-inch aluminum skid plate that replaces the factory skid, which is not compatible with the new bumper. The aluminum skid is finished in satin black powder coat for corrosion and weather resistance, and it is sized to protect the vehicle's undercarriage components in rough terrain. The bumper also retains the Raptor's OEM parking sensors. Adaptive cruise control is retained as well, but doing so requires the ACC Relocation Bracket, which is sold separately.

Features

• Knife's-edge low-profile design: follows the Raptor's factory valance and fender bodylines for a flush, factory-integrated appearance
• Center light mount: inset mounting for one 20-inch radius LED light bar or up to five 3-inch cube lights (lights sold separately)
• Included 3/16-inch aluminum skid plate: replaces the incompatible factory skid; finished in satin black powder coat
• OEM parking sensor retention: designed to retain factory parking sensors on equipped models
• ACC retention: adaptive cruise control is retained with the ACC Relocation Bracket (sold separately)
• Frame-mounted recovery point provisions: design includes provisions for adding frame-mounted recovery points
• Fully bolt-on installation: no cutting or welding required; made in the USA

Specifications

WARNING (California Proposition 65): This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The Phantom Front Bumper suits 2022–2026 Ford Bronco Raptor owners who want a low-profile, factory-integrated front end upgrade with built-in lighting provisions, undercarriage skid protection, and OEM sensor retention for daily driving and off-road use.

The Phantom does not fit standard (non-Raptor) Ford Bronco models. Lights, recovery points, and the ACC Relocation Bracket are not included and must be purchased separately. The factory skid plate is not reused and is replaced by the included aluminum skid.

Common Questions

Does the Phantom Front Bumper fit all Ford Bronco models?

The Addictive Desert Designs Phantom Front Bumper fits only the 2022–2026 Ford Bronco Raptor. It is not designed for standard Bronco trims and will not fit non-Raptor models.

What lighting fits in the center mount?

The Phantom's inset center section accepts one 20-inch radius LED light bar or up to five 3-inch cube lights. The bumper provides the mounting location; lights are sold separately and are not included.

Are the factory parking sensors and adaptive cruise control retained?

The Phantom Front Bumper is designed to retain OEM parking sensors on equipped Bronco Raptor models. Adaptive cruise control is also retained, but the ACC Relocation Bracket is required and sold separately.

What is included with the bumper?

The Phantom Front Bumper ships with the bumper itself and a 3/16-inch aluminum skid plate finished in satin black powder coat. The skid plate replaces the factory skid, which is not compatible with this bumper. The ACC Relocation Bracket, lights, and recovery points are sold separately.

Does this bumper require cutting or welding to install?

The Addictive Desert Designs Phantom Front Bumper is fully bolt-on and does not require cutting or welding. Addictive Desert Designs provides a bumper install guide and a separate ACC Bracket install guide for reference.