Addictive Desert Designs Phantom Front Bumper for Chevy Colorado ZR2

The Addictive Desert Designs Phantom Front Bumper is a steel replacement front bumper built specifically for the 2023–2024 Chevy Colorado ZR2. Its knife-edge, low-profile design follows the ZR2's body lines closely, retaining OEM sensors and factory recovery points without relocation hardware. A 3/16-inch aluminum skid plate with integrated air vents is included. The bumper is designed and manufactured in the USA.

Low-Profile Design That Works With the ZR2's Geometry

The Phantom's knife-edge profile is shaped to follow the Colorado ZR2's body lines with tight tolerances, keeping the bumper low and forward rather than adding bulk. That low stance translates directly to a better approach angle off-road. The front of the truck can tip into a descent or climb without the bumper catching terrain that the stock unit would have cleared. The result is a bumper that looks integrated rather than bolted-on, because the fitment was engineered for this specific truck rather than adapted from a universal template.

OEM Sensors and Recovery Points Stay Where They Are

The Phantom retains all factory sensors in their original positions: no relocation brackets, no recalibration workarounds, no cutting into wiring harnesses. Radar, parking sensors, and any other ZR2-spec front sensors remain functional after installation. The OEM recovery points are also preserved, so the truck's factory tow hooks remain usable for recovery without adding aftermarket hardware to compensate for what a bumper swap removed.

Lighting Mounts Built Into the Structure

The center section accepts one 20-inch straight or radius LED light bar, or up to six 3-inch cube lights. The mounting provisions are part of the bumper structure, not add-on brackets. Each wing carries a dedicated mount for a 10-inch single-row LED light bar. Having two independent wing positions alongside the center mount means a ZR2 owner can run a wide flood in the center and focused spots in the wings simultaneously, without sourcing separate mounting hardware or drilling into the bumper after the fact.

Features

• Knife-edge, low-profile design: follows ZR2 body lines for tight fitment and improved approach angle
• Center lighting mount: accepts one 20-inch straight or radius light bar, or six 3-inch cube lights
• Wing lighting mounts: two positions, each sized for a 10-inch single-row LED light bar
• OEM sensor retention: all factory sensors stay in place with no relocation brackets required
• OEM recovery point retention: factory tow hooks remain functional after installation
• Included 3/16-inch aluminum skid plate: integrated air vents improve airflow at speed
• Dual-stage hammer black powder coat finish: applied over the full steel bumper body after sandblasting; satin black powder-coated aluminum accent panels
• Made in USA: designed and manufactured in Chandler, Arizona

Specifications

Who This Is For and Isn't

The Phantom Front Bumper suits 2023–2024 Chevy Colorado ZR2 owners who want a low-profile steel front bumper with integrated lighting provisions, OEM sensor retention, and a factory-quality fit and finish for trail use and daily driving.

This bumper fits only the 2023–2024 Chevy Colorado ZR2. It does not fit other Colorado trims, other model years, or any other vehicle. LED light bars, cube lights, and winch hardware are not included and must be sourced separately. California buyers: this product carries a Proposition 65 warning for silica, crystalline, a chemical known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

Common Questions

Does the Phantom Front Bumper require sensor relocation brackets for the Colorado ZR2?

No. The Addictive Desert Designs Phantom Front Bumper for the 2023–2024 Chevy Colorado ZR2 is designed to retain all factory sensors in their original positions. No relocation brackets are needed, and no sensor recalibration is required as a result of the bumper swap itself.

What lighting can be mounted on this bumper?

The Phantom Front Bumper's center section accepts one 20-inch straight or radius LED light bar, or up to six 3-inch cube lights. Each wing includes a dedicated mount for a 10-inch single-row LED light bar. Light bars and cube lights are not included and must be purchased separately.

Is a skid plate included with the bumper?

Yes. The Phantom Front Bumper ships with a 3/16-inch aluminum skid plate that features integrated air vents designed to improve airflow at higher speeds. The skid plate is part of the bumper package and does not need to be purchased separately.

Does this bumper retain the Colorado ZR2's factory recovery points?

Yes. The Phantom Front Bumper is designed to retain the Colorado ZR2's OEM recovery points, so the factory tow hooks remain usable for vehicle recovery after installation without requiring aftermarket recovery hardware to replace them.

Where is the Phantom Front Bumper made?

The Addictive Desert Designs Phantom Front Bumper is designed and manufactured in Chandler, Arizona. All design, development, manufacturing, and testing are performed at Addictive Desert Designs' facility in the USA.