Addictive Desert Designs Krawler Rear Bumper for Ford Bronco

The Addictive Desert Designs Krawler Rear Bumper is a low-profile plate steel rear bumper built for the 2021–2026 Ford Bronco and designed around the demands of rock crawling. It retains the OEM tire mount, backup camera, factory parking sensors, hitch, and trailer harness. Replacing the stock bumper costs you none of your factory functionality. Two 3–4 inch round light mounts and two heavily reinforced clevis mounts for ¾-inch D-ring shackles are integrated into the structure.

Built Low, Built Tough

The Krawler's low-profile plate steel construction keeps the rear corners out of harm's way on technical terrain where a taller bumper would catch rock faces and ledges. Plate steel at the rear means the bumper absorbs impacts that would crack or deform lighter materials, and the low stance preserves departure angle, a real consideration when picking a line through a boulder field rather than a fire road. The hammer black powder coat finish is applied after sandblasting, giving the steel a durable, corrosion-resistant surface that holds up to trail abuse.

No Factory Features Sacrificed

The Krawler Rear Bumper retains the OEM spare tire mount, backup camera, factory parking sensors, factory hitch receiver, and trailer harness plug. Swapping to an aftermarket bumper often means losing one or more of these. The Krawler is engineered so none of them require relocation or deletion. A 3rd brake light extension bracket (included) keeps the brake light functional with spare tires up to 37 inches, and a license plate relocation bracket (also included) repositions the plate and light to align with the bumper's new profile.

Bolt-On Installation, Made in the USA

The Krawler installs fully bolt-on with no cutting or drilling required on the Bronco's frame or body. Addictive Desert Designs designs, manufactures, and tests its products in Chandler, Arizona. Aluminum accent panels on the bumper carry a satin black powder coat finish, contrasting the hammer black steel body and adding a visual break without adding significant weight.

Features

• Two 3–4 in. round light mounts: one per side, sized for standard round auxiliary lights (lights sold separately)
• Two reinforced clevis mounts: accept ¾-inch D-ring shackles for rear recovery points
• OEM retention: spare tire mount, backup camera, parking sensors, factory hitch, and trailer harness all retained
• Included brackets: 3rd brake light extension bracket (up to 37 in. spare tire) and license plate relocation bracket
• Dual powder coat finish: hammer black on plate steel body; satin black on aluminum accent panels
• Fully bolt-on, Made in USA: no cutting or drilling; manufactured in Chandler, Arizona

Specifications

California Proposition 65 Warning: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The Krawler Rear Bumper suits 2021–2026 Ford Bronco owners who run technical rock crawling or off-road trails and want a low-profile steel bumper that adds reinforced recovery points and auxiliary light mounts without giving up the factory spare tire carrier, backup camera, parking sensors, or tow hitch.

The Krawler does not fit any vehicle other than the 2021–2026 Ford Bronco. Auxiliary lights are not included; the bumper provides the mounts only. The included 3rd brake light extension bracket supports spare tires up to 37 inches; larger spares are not accommodated.

Common Questions

Does the Krawler Rear Bumper fit all 2021–2026 Ford Bronco trims?

The Krawler Rear Bumper is designed for the 2021–2026 Ford Bronco. Fitment data does not distinguish by trim level; the bumper covers all model years listed. Confirm your specific trim against the install instructions before ordering if you have any doubt.

Does installation require cutting or drilling the Bronco's frame?

No. The Krawler Rear Bumper is fully bolt-on and is designed to mount to the 2021–2026 Ford Bronco without cutting, drilling, or modifying the factory frame or body. Install instructions are available from Addictive Desert Designs.

Will my backup camera and parking sensors still work after installing this bumper?

Yes. The Krawler Rear Bumper is engineered to retain the OEM backup camera and factory parking sensors on equipped Bronco models, so both systems remain operational after installation without relocation or modification.

What recovery hardware does the bumper include?

The Krawler Rear Bumper includes two heavily reinforced clevis mounts, one on each side, sized for ¾-inch D-ring shackles. D-ring shackles themselves are not included and must be sourced separately.

Are lights included with the two round light mounts?

Lights are not included. The Krawler Rear Bumper provides two 3–4 inch round light mount positions, one per side, but compatible auxiliary lights are sold separately and are not part of this bumper kit.

What is the largest spare tire the 3rd brake light bracket supports?

The included 3rd brake light extension bracket is compatible with spare tires up to 37 inches in diameter. The Krawler Rear Bumper retains the OEM spare tire mount, so the spare mounts in the factory position; the bracket keeps the brake light functional at that tire size.