Addictive Desert Designs HoneyBadger Front Bumper for Ford F-150 Raptor

The Addictive Desert Designs HoneyBadger Front Bumper is a bolt-on plate steel front bumper for the 2021–2026 Ford F-150 Raptor and 2021–2023 Ford F-150 Raptor R, built with sharp angular styling and multiple integrated LED light bar mount positions. The steel body is finished in hammer black powder coat; aluminum side panels carry a satin black powder coat. This version does not include a top hoop, which is available as a separate configuration.

Designed Around Your Lighting Setup

The HoneyBadger front bumper provides three distinct LED light bar mounting positions: a 30-inch radius mount on top of the bumper that follows the curve of the truck's front end, a 20-inch straight mount in the center behind the HoneyBadger claw cutaways, and 10-inch mounts behind each side panel. The dedicated, protected mount locations keep light bars recessed and shielded rather than exposed on a flat bar, which matters on tight trails where brush and debris can contact the front of the truck. None of the light bars are included; the bumper provides the mounting positions only.

Sensor and OEM Hardware Compatibility

The HoneyBadger bumper accommodates both Ford Raptor sensor configurations. Trucks equipped with the 801A High package can have their OEM front parking sensors installed directly into the bumper without modification. Trucks equipped with the 800A Standard package receive sensor plugs with every shipment to cap the unused sensor mount holes cleanly. OEM tow hooks fit underneath the bumper without alteration, preserving the truck's towing capability. A shutter motor bracket is included with the bumper.

Trucks with Adaptive Cruise Control require an Adaptive Cruise Control Relocation Bracket, sold separately, to maintain full ACC function. The bumper is also compatible with the Raptor Intercooler Kit (IC1650KIT, sold separately), which requires the Shutter Motor Relocation Kit; 2024 and later Raptor models installing the Intercooler Upgrade Kit require an additional shutter motor relocation kit. The Raptor R High Mount Heat Exchanger Kit (AC21112301NA) is also compatible, sold separately.

Plate Steel Construction, American-Made Finish

The HoneyBadger bumper body is fabricated from plate steel and finished in hammer black powder coat, which provides corrosion resistance and a textured surface that holds up to trail use. The aluminum side panels are finished separately in satin black powder coat. Addictive Desert Designs designs, manufactures, and tests this bumper in Chandler, Arizona. Installation is fully bolt-on with no cutting or welding required.

Features

• Plate steel construction: modern plate steel design sits close to the front of the truck for a low-profile fit
• Three LED light bar mount positions: 30-inch radius mount on top, 20-inch straight mount in center, 10-inch mounts behind each side panel
• Dual sensor compatibility: fits 801A High package (sensors install directly) and 800A Standard package (sensor plugs included)
• OEM tow hook retention: factory tow hooks fit underneath without modification
• Shutter motor bracket included: bracket ships with the bumper
• Bolt-on installation: no cutting or welding required; Made in America

Specifications

WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The HoneyBadger front bumper suits owners of 2021–2026 Ford F-150 Raptor trucks (and 2021–2023 Raptor R) who want a low-profile, aggressive-looking plate steel bumper with multiple integrated LED light bar mounting positions and full OEM sensor and tow hook compatibility.

This version does not include a top hoop; buyers who want the hoop should select the alternate HoneyBadger configuration. The Adaptive Cruise Control Relocation Bracket is not included and must be purchased separately for ACC-equipped trucks. LED light bars, the Intercooler Kit, the Shutter Motor Relocation Kit, and the Heat Exchanger Kit are all sold separately. This bumper does not fit any Ford F-150 trim other than the Raptor and Raptor R, and Raptor R fitment is confirmed only for model years 2021–2023.

Common Questions

Does this bumper fit both the Raptor and the Raptor R?

The Addictive Desert Designs HoneyBadger front bumper fits the 2021–2023 Ford F-150 Raptor and the 2021–2023 Ford F-150 Raptor R. For model years 2024–2026, fitment is confirmed for the Ford F-150 Raptor only; Raptor R compatibility for those years is not confirmed in the available fitment data.

What LED light bars can I mount, and where?

The HoneyBadger front bumper provides three mounting positions: a 30-inch radius mount on top of the bumper, a 20-inch straight mount in the center behind the claw cutaways, and a 10-inch mount behind each side panel. Light bars are not included with the bumper and must be purchased separately.

Will this bumper work with my truck's front parking sensors?

The HoneyBadger front bumper accommodates both Ford Raptor sensor configurations. Trucks with the 801A High package can have OEM parking sensors installed directly into the bumper. Trucks with the 800A Standard package receive sensor plugs in the box to cap the unused sensor holes.

Is the top hoop included with this bumper?

No. This version of the HoneyBadger front bumper does not include a top hoop. Addictive Desert Designs offers the HoneyBadger in a separate configuration that includes the top hoop for buyers who want that feature.

Do I need to do anything special to keep my Adaptive Cruise Control working?

Yes. Ford F-150 Raptor trucks equipped with Adaptive Cruise Control require an Adaptive Cruise Control Relocation Bracket to maintain full ACC function after installing the HoneyBadger front bumper. That bracket is sold separately and is not included with this bumper.

Is this a bolt-on installation, or does it require cutting or welding?

The Addictive Desert Designs HoneyBadger front bumper is a fully bolt-on installation with no cutting or welding required. A shutter motor bracket is included. Trucks installing the optional Intercooler Upgrade Kit may require an additional shutter motor relocation kit, sold separately.