Addictive Desert Designs F-150 Raptor ACC Relocation Bracket

The Addictive Desert Designs F-150 Raptor Adaptive Cruise Control Relocation Bracket mounts the ACC sensor module behind the grille of 2021–2023 Ford F-150 Raptor trucks, allowing the adaptive cruise control system to remain functional after an aftermarket front bumper is installed. The bracket is constructed from lightweight aluminum and finished in satin black powder coat. It fits the 2021, 2022, and 2023 Ford F-150 Raptor (3rd Gen).

Retain Adaptive Cruise Control After a Bumper Swap

Most aftermarket front bumpers for the 3rd Gen Raptor do not provide a mounting location for the factory ACC sensor, which means the system goes offline once the stock bumper is removed. The Addictive Desert Designs ACC Relocation Bracket solves this by repositioning the sensor behind the grille in a location that preserves radar line-of-sight. The lower mounting position is the primary orientation and keeps ACC performance close to the factory calibration.

Two Positions for Accessory-Heavy Builds

When aftermarket accessories (light bars, winch fairleads, or other hardware) extend above the bumper line and block the sensor's forward view, the bracket can be repositioned higher in the grille opening instead. This flexibility means the bracket accommodates a range of build configurations without requiring a second bracket or custom fabrication.

Bolt-On Aluminum Construction, Made in the USA

The bracket is machined from lightweight aluminum and finished in satin black powder coat, which keeps it discreet behind the grille. Installation is fully bolt-on with no cutting or drilling required. The bracket is manufactured by Addictive Desert Designs in Chandler, Arizona.

Features

• ACC Sensor Relocation: repositions the factory adaptive cruise control module behind the grille for use with aftermarket front bumpers
• Two Mounting Positions: lower (primary, near-OEM function) or higher to clear accessories that extend above the bumper
• Lightweight Aluminum Construction: bracket weighs 1 lb
• Satin Black Powder Coat Finish: blends discreetly behind the grille
• Fully Bolt-On: no cutting or drilling required
• Made in USA: manufactured in Chandler, Arizona

Specifications

Please Note: In some instances the adaptive cruise control system may need to be recalibrated by a Ford service center after installation.

California Proposition 65 Warning: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

This bracket is designed for 2021, 2022, and 2023 Ford F-150 Raptor owners who are installing an aftermarket front bumper and need to retain the factory adaptive cruise control system. It suits builds where accessories mounted above the bumper line would otherwise obstruct the ACC sensor.

This bracket does not fit any F-150 model year outside 2021–2023, and it does not fit non-Raptor F-150 trims. It is not a universal ACC relocation solution for other Ford vehicles or other truck platforms.

Common Questions

Will this bracket work with any aftermarket front bumper for the 2021–2023 F-150 Raptor?

The Addictive Desert Designs ACC Relocation Bracket is designed to reposition the factory ACC sensor behind the grille when an aftermarket front bumper is installed on a 2021–2023 Ford F-150 Raptor. Compatibility with a specific aftermarket bumper depends on whether that bumper's grille opening allows the bracket to be positioned with adequate forward line-of-sight for the sensor.

Does the adaptive cruise control system need to be recalibrated after installing this bracket?

In some instances, the adaptive cruise control system on the 2021–2023 Ford F-150 Raptor may need to be recalibrated by a Ford service center after the ACC sensor is relocated using this bracket. Whether recalibration is required will depend on the specific installation and sensor position chosen.

What are the two mounting positions, and when should each be used?

The ACC Relocation Bracket offers a lower mounting position, which is the primary orientation and keeps adaptive cruise control performance close to factory calibration. The higher position is available for builds where aftermarket accessories mounted above the bumper line extend in front of the sensor and would otherwise obstruct its forward view.

Does this bracket fit F-150 Raptor model years before 2021 or after 2023?

The Addictive Desert Designs ACC Relocation Bracket is fitment-specific to the 2021, 2022, and 2023 Ford F-150 Raptor (3rd Gen). It does not fit earlier Raptor generations or F-150 Raptor model years outside this range.

Is any drilling or cutting required to install this bracket?

The ACC Relocation Bracket is fully bolt-on. No cutting or drilling is required for installation on the 2021–2023 Ford F-150 Raptor.