Addictive Desert Designs Bomber Front Bumper for Ford Super Duty

The Addictive Desert Designs Bomber front bumper is a bolt-on steel replacement bumper for 2023–2026 Ford Super Duty F-250, F-350, and F-450 trucks, built around a modern steel plate design with integrated lighting mounts, CNC machined clevis recovery points, and an included 3/16-inch aluminum skid plate. It ships with a Hammer Black powder coat on the steel body and a Satin Black powder coat on the aluminum accent panels, finished and assembled in Chandler, Arizona.

Integrated Lighting Without Extra Fabrication

The Bomber bumper's center section carries four recessed mounting points sized for Rigid 360 series round lights, set within a satin black aluminum accent plate. Recessing the mounts keeps the lights protected and positions them for maximum forward throw without adding a separate light bar or custom brackets. Each bumper wing adds a dedicated mount for a single 3-inch cube light. That side-angle fill matters when navigating tight trails or scanning a campsite. Having these mounts built into the bumper means the wiring path is predictable: zip tie slots are integrated into the structure for clean, rattle-free wire management.

Recovery-Ready Clevis Mounts

The Bomber includes two 1-inch thick CNC machined clevis mounts, each compatible with 3/4-inch D-ring tow shackles using 7/8-inch pins. Machining the clevis mounts rather than welding a stamped tab produces a more consistent geometry and a cleaner shackle fit. Consistent geometry matters when a recovery load is applied suddenly and at an angle. The mounts are positioned at bumper ends where recovery angles are practical, not just decorative.

OEM Sensor Retention and a Bolt-On Fit

The Bomber retains the factory parking sensors in their original locations, so the OEM driver-assistance system continues to function without modification. Trucks equipped with Adaptive Cruise Control can retain that system as well, using the separately sold Addictive Desert Designs ACC Relocation Bracket. The bumper installs fully bolt-on with no cutting or drilling required, using the factory mounting locations on the Super Duty frame.

Features

• 4 recessed center light mounts: sized for Rigid 360 series round lights, framed by a satin black aluminum accent plate
• 2 wing cube light mounts: one per side, sized for 3-inch pod lights
• 1-inch thick CNC machined clevis mounts: compatible with 3/4-inch D-rings (7/8-inch pins)
• 3/16-inch aluminum skid plate: included; adds frontal protection below the bumper face
• Hammer Black powder coat: applied after sandblasting on the steel body; Satin Black powder coat on aluminum accent panels
• Bolt-on installation: uses factory Super Duty frame mounting locations; no cutting or drilling

Specifications

Who This Is For and Isn't

The Bomber front bumper suits 2023–2026 Ford Super Duty F-250, F-350, and F-450 owners who want integrated Rigid 360 and cube light mounts, bolt-on recovery points, and a factory-sensor-compatible replacement bumper with a clean steel plate aesthetic and a durable powder coat finish.

This bumper does not fit Ford Super Duty trucks outside the 2023–2026 model years, and it is not compatible with any other make or model. Rigid 360 lights, cube lights, and D-ring shackles are not included. Retaining Adaptive Cruise Control requires the separately sold ACC Relocation Bracket, which is not part of this package.

Common Questions

Which Ford Super Duty years and models does this bumper fit?

The Addictive Desert Designs Bomber front bumper fits 2023–2026 Ford Super Duty F-250, F-350, and F-450 trucks. It does not fit earlier Super Duty generations or any other Ford model. Cab configuration and wheelbase are not listed as fitment variables for this bumper.

What lights are compatible with the center and wing mounts?

The four center mounts on the Bomber bumper are sized for Rigid Industries 360 series round lights. Each wing carries one mount sized for a 3-inch cube light, such as the Rigid Radiance cube. None of these lights are included with the bumper and must be purchased separately.

Will my factory parking sensors still work after installing this bumper?

Yes. The Bomber front bumper is designed to retain the OEM parking sensors in their factory locations, so the parking-sensor system continues to operate without modification after installation.

What happens to Adaptive Cruise Control when I install this bumper?

The Bomber bumper requires the separately sold Addictive Desert Designs ACC Relocation Bracket to retain Adaptive Cruise Control on equipped Super Duty trucks. Without that bracket, the ACC sensor cannot be repositioned and the system will not function correctly after the bumper swap.

Is the skid plate included, or do I need to buy it separately?

The 3/16-inch aluminum bumper skid plate is included with the Bomber front bumper. No separate skid plate purchase is needed for the coverage this bumper provides at the front lower face.

Does installation require cutting, welding, or drilling?

The Bomber front bumper installs fully bolt-on using the factory mounting locations on the Super Duty frame. No cutting, welding, or drilling is required. An install guide is available from Addictive Desert Designs for reference during the swap.