Addictive Desert Designs Bomber Front Bumper for Ford F-150 Raptor and Raptor R

The Addictive Desert Designs Bomber Front Bumper is a fully bolt-on steel-and-aluminum front bumper built for the 2021–2026 Ford F-150 Raptor and Raptor R. Constructed from plate steel with lightweight aluminum panels and a 3/16-inch aluminum skid plate, the Bomber delivers front-end protection while coming in lighter than the factory bumper. This Baja Designs variant includes mounts for three Baja Designs LP6 round lights at center and cube light mounts on each wing.

Low-Profile Protection Without the Weight Penalty

The Bomber's plate steel construction keeps the bumper sitting as close to flush with the truck as possible, preserving the Raptor's aggressive factory stance rather than adding bulk. The 3/16-inch aluminum skid plate contributes to a total weight that comes in under the OEM front bumper. On a truck where unsprung and front-axle weight directly affect high-speed desert running and approach angles on technical terrain, a genuine weight reduction at this level of steel construction is worth noting. Buyers who have weighed aftermarket bumpers against stock know how rare that is.

OEM Features Retained, Not Sacrificed

The Bomber is engineered to retain the Raptor's factory parking sensors and OEM tow hooks, so the truck's driver-assist systems and recovery capability carry over without modification. A shutter motor bracket is included with the bumper. Trucks equipped with adaptive cruise control require an Adaptive Cruise Control Relocation Bracket (sold separately) to maintain full ACC function after installation.

Lighting Ready at Center and on the Wings

This Baja Designs variant of the Bomber provides three LP6 round light mounts at the center of the bumper for high-output forward lighting, plus cube light mounts behind each side panel for supplemental coverage. Lights are not included. The Bomber is also compatible with the Addictive Desert Designs Raptor Intercooler Kit (IC1650KIT, sold separately) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA, sold separately); 2024 and later Raptor models installing the intercooler upgrade additionally require a Shutter Motor Relocation Kit (sold separately).

Features

• Plate steel construction: modern low-profile design sized to sit close to flush with the truck body
• 3/16-inch aluminum skid plate: full-width coverage; contributes to a total weight below the OEM front bumper
• Baja Designs LP6 light mounts: three center mounts sized for BD LP6 round lights
• Wing cube light mounts: one mount behind each side panel for supplemental lighting
• OEM retention: factory parking sensors and tow hooks remain in place
• Fully bolt-on, Made in America: no cutting or drilling required; manufactured in Chandler, Arizona

Specifications

WARNING (California Proposition 65): This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Who This Is For and Isn't

The Addictive Desert Designs Bomber Front Bumper suits 2021–2026 Ford F-150 Raptor and Raptor R owners who want a bolt-on steel front bumper that reduces weight versus the factory unit, retains OEM parking sensors and tow hooks, and provides dedicated Baja Designs LP6 and cube light mounting positions for high-output trail or desert lighting.

The Bomber Front Bumper does not fit any Ford F-150 outside the Raptor and Raptor R variants, nor does it fit earlier or later Raptor generations beyond the 2021–2026 model years. Lights, the Adaptive Cruise Control Relocation Bracket, the Intercooler Kit, the Heat Exchanger Kit, and any Shutter Motor Relocation Kit are not included and must be purchased separately. ACC-equipped trucks require the ACC Relocation Bracket to retain adaptive cruise control function.

Common Questions

Does this bumper fit both the standard F-150 Raptor and the Raptor R?

The Addictive Desert Designs Bomber Front Bumper is designed for the 2021–2026 Ford F-150 Raptor and Raptor R. It does not fit standard F-150 trims or earlier Raptor generations. Buyers should confirm their model year falls within the 2021–2026 range before ordering.

Is any cutting or drilling required to install this bumper?

The Bomber Front Bumper is fully bolt-on and requires no cutting or drilling for installation on the 2021–2026 Ford F-150 Raptor and Raptor R. A shutter motor bracket is included. Trucks with adaptive cruise control will need an Adaptive Cruise Control Relocation Bracket, sold separately, to retain full ACC function.

Will my factory parking sensors and tow hooks still work after installing this bumper?

The Addictive Desert Designs Bomber Front Bumper is engineered to retain the Raptor's OEM parking sensors and factory tow hooks. No sensor relocation or tow hook modification is required on sensor-equipped models.

What lights come with the bumper, and what mounts does it include?

No lights are included with the Bomber Front Bumper. This Baja Designs variant provides three center mounts sized for Baja Designs LP6 round lights and one cube light mount behind each side wing panel. Lights must be purchased separately.

Is the Bomber compatible with the Raptor's intercooler or heat exchanger upgrades?

The Bomber Front Bumper is compatible with the Addictive Desert Designs Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. On 2024 and later Raptor models, installing the intercooler upgrade also requires a Shutter Motor Relocation Kit, sold separately.