Addictive Desert Designs ADD PRO V1 Front Bumper for Ford Raptor

The Addictive Desert Designs ADD PRO V1 is a frame-cut front bumper built exclusively for the 2017–2023 Ford F-150 Raptor, designed to maximize approach angle without sacrificing the truck's factory body lines. Constructed from .120" wall steel tubing with an integrated aluminum skid plate, the ADD PRO V1 eliminates the plastic valence while contouring directly to the Raptor's front end. Note: installation requires an Intercooler Relocation Kit and a frame cut. Plan accordingly before ordering.

Maximum Approach Angle Without Compromise

A frame-cut bumper design removes the material that a conventional replacement bumper leaves in the wheel path, giving the Raptor a steeper, unobstructed approach angle on technical terrain. For drivers who run rocky trails, steep ledges, or deep ruts, that extra clearance is the difference between a clean line and a hung-up front end. The ADD PRO V1 achieves this without requiring a plastic valence to fill the gap: the bumper's geometry is shaped to follow the Raptor's body lines directly.

Steel Construction Built for Trail Abuse

The ADD PRO V1 is fabricated from .120" wall steel tubing, a wall thickness that provides meaningful resistance to trail impacts, brush, and rock strikes without the weight penalty of heavier plate steel. An aluminum skid plate is integrated beneath the main tube, protecting the lower front end on approach. Designed, developed, manufactured, and tested in Chandler, Arizona, the bumper is built to the fit-and-finish standard Addictive Desert Designs applies across its full lineup.

Flexible Light Mounting Built In

Light mounts are positioned underneath the main tube, keeping auxiliary lighting tucked away and protected rather than exposed above the bumper line. The mounting configuration accommodates up to seven cube lights or a 20" radius LED bar, and the ADD PRO V1 ships with the Universal Light Mount Kit included, so any brand or size of lighting can be fitted without sourcing a separate adapter. This flexibility lets the lighting setup grow or change as the build evolves.

Features

• Frame-cut design: maximizes approach angle for off-road use
• .120" wall steel tubing: structural strength for trail impacts
• Aluminum skid plate: integrated lower-front protection
• Tucked light mounts: accommodates up to 7 cube lights or a 20" radius LED bar
• Universal Light Mount Kit included: compatible with any brand or size of auxiliary lighting
• No plastic valence required: contours directly to Raptor body lines

Specifications

Who This Is For and Isn't

The ADD PRO V1 is built for 2017–2023 Ford F-150 Raptor owners who prioritize maximum front approach angle on technical off-road terrain and want a bumper that follows the truck's factory body lines without a plastic valence. Overlanders and trail runners who run auxiliary lighting will benefit from the integrated, tucked light-mount system and the included Universal Light Mount Kit.

This bumper does not fit any F-150 trim other than the Raptor, and it does not fit model years outside 2017–2023. Installation requires a frame cut and a separately sourced Intercooler Relocation Kit. The bumper cannot be installed without both. It is not a bolt-on replacement.

Common Questions

Which exact vehicles does the ADD PRO V1 front bumper fit?

The ADD PRO V1 front bumper fits the 2017–2023 Ford F-150 Raptor only. It is not compatible with any other F-150 trim level or with Raptor model years outside that range. Confirm your model year and trim before ordering.

Does installation require cutting the frame?

Yes. The ADD PRO V1 uses a frame-cut design, which means installation requires cutting the truck's frame to achieve the maximum approach angle the bumper is designed for. This is not a reversible modification. Professional installation is strongly recommended.

Is the Intercooler Relocation Kit included?

No. The Intercooler Relocation Kit is required for installation of the ADD PRO V1 front bumper on the Ford Raptor but is not included with the bumper. It must be sourced separately before installation can proceed.

What lighting can be mounted on the ADD PRO V1?

The ADD PRO V1 front bumper accommodates up to seven cube lights or a 20" radius LED bar, mounted underneath the main tube to keep lights tucked and protected. The Universal Light Mount Kit ships with the bumper and is compatible with any brand or size of auxiliary lighting.

Where is the ADD PRO V1 manufactured?

The ADD PRO V1 front bumper is designed, developed, manufactured, and tested by Addictive Desert Designs in Chandler, Arizona.

Does the ADD PRO V1 carry a Proposition 65 warning?

Yes. WARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.