23ZERO Onyx 180 Awning Wall Kit

The 23ZERO Onyx 180 Awning Wall Kit converts the Onyx 180 Awning into a fully enclosed camp shelter using six modular 320gsm polycotton honeycomb canvas wall panels with Light Suppression Technology (LST). The kit fits the Onyx 180 Awning exclusively and is not compatible with any Peregrine awning model.

A Full Enclosure Without a Fixed Footprint

Six labeled wall panels attach to the Onyx 180 Awning using a top-zip system, with adjoining panels zipping together along the sides. Because each panel is independent, a camp that only needs a windbreak on one side or shade on two can run a partial configuration rather than the full enclosure. That flexibility matters on multi-night basecamps where weather shifts between morning and afternoon or where neighboring sites change the privacy equation. Wall 6 secures via an integrated Keder track for a clean, rattle-free fit at the awning edge.

LST Fabric and Reinforced Construction

The 320gsm polycotton honeycomb canvas carries 23ZERO's Light Suppression Technology, which reduces heat, glare, and UV penetration inside the enclosure. Polycotton breathes better than pure synthetic fabrics, which helps moderate interior temperature when the walls are closed. Reinforced edges and grommeted tie-down points add durability at the stress points most likely to see load during wind or staking. Twenty-one included stakes and guy ropes are sized for the full six-panel perimeter.

Ventilation Designed Into the Layout

Three front entry panels each carry a large zippered insect screen with a solid weather flap that closes over it. Open the screens for cross-ventilation and insect exclusion on warm nights; close the flaps during rain or cold. The centered rear zippered door (approximately 42 inches wide) provides direct access between the shelter interior and the vehicle or trailer without walking around the outside of the enclosure. The walls are designed to slope outward at the recommended 6-foot mounted height to shed water away from the base.

Features

• Six modular wall panels: install all or only the panels the conditions require
• 320gsm polycotton honeycomb canvas with LST: reduces heat, glare, and UV penetration
• Top-zip and side-zip attachment: panels connect to the awning and to each other independently
• Keder track mounting on Wall 6: secure, clean fit at the awning edge
• Three front screened doors: zippered insect screens with solid weather flaps for adjustable airflow
• Centered rear door: approximately 42-inch-wide zippered access to the vehicle or trailer

Specifications

Who This Is For and Isn't

The Onyx 180 Awning Wall Kit suits overlanders and car campers who already own the 23ZERO Onyx 180 Awning and want to convert it into a weather-resistant, insect-proof enclosed shelter for basecamp use. The modular design works for setups where full enclosure is needed some nights and partial coverage is enough on others.

This wall kit is not compatible with any 23ZERO Peregrine awning model; Peregrine wall kits and the Peregrine Weather Extension do not fit Onyx awnings, and this kit does not fit them either. The Onyx 180 Awning itself is not included and must be purchased separately. Proper function requires the awning to be mounted at approximately 6 feet and all support legs deployed before installation.

Common Questions

Which awning does this wall kit fit?

The Onyx 180 Awning Wall Kit is compatible exclusively with the 23ZERO Onyx 180 Awning. It does not fit any Peregrine awning model, and Peregrine wall kits are not interchangeable with Onyx awnings.

Does the Onyx 180 Awning come included?

The Onyx 180 Awning is not included with this wall kit and must be purchased separately. The wall kit includes six wall panels, a heavy-duty storage bag, guy ropes, and twenty-one stakes.

Can I use fewer than all six wall panels?

Yes. The Onyx 180 Awning Wall Kit is designed for partial or full deployment. Each panel attaches independently using top and side zippers, so you can install only the walls needed for a given campsite layout or weather condition.

What is the recommended mounting height for the awning?

The Onyx 180 Awning Wall Kit is designed for an awning mounted at approximately 6 feet high, with a tolerance of plus or minus 3 to 6 inches depending on the specific setup. At that height the walls slope outward to encourage water runoff away from the base.

How do the wall panels attach to the awning?

Wall panels connect to the Onyx 180 Awning via a top-zip system, and adjoining panels zip together along their sides. Wall 6 uses an integrated Keder track for a secure fit at the awning edge. The wall panels and awning are labeled to simplify placement during setup.

How does the fabric manage heat and sunlight?

The wall panels are made from 320gsm polycotton honeycomb canvas with 23ZERO's Light Suppression Technology (LST), which is designed to reduce heat, glare, and UV penetration inside the enclosure for a cooler shelter environment.