23ZERO Bandit 1400 Single Swag with Foam Mattress
23ZERO Bandit 1400 Single Swag with Foam Mattress
Couldn't load pickup availability
The 23ZERO Bandit 1400 is a freestanding single swag built for solo camping, overlanding, and hunting in variable conditions. Its segmental arch frame and near-vertical walls create a roomy interior (85 inches long, 55 inches wide, and 33.5 inches tall when open), while the 400gsm proofed poly/cotton canvas shell and HF-welded 550gsm PVC bucket floor handle rain, wind, and ground moisture. A 2.75-inch high-density foam mattress and oversized canvas carry bag are included.
Room to Sleep, Not Just to Survive
The Bandit 1400's segmental arch design pushes the walls close to vertical, so the full 55-inch width is usable headroom and shoulder room rather than wasted slope. At 85 inches long, the interior accommodates most adult sleepers without the cramped diagonal compromise common in smaller swags. That interior volume is what separates a swag you look forward to using from one you tolerate on a long trip.
Four-Way Entry and All-Weather Ventilation
The Bandit 1400 has four entry points, each with a zippered storm cover and a PVC-coated poly super-fine insect mesh panel, so the swag can be opened to a breeze from any direction or closed completely against wind and insects. The gusseted all-weather canopies direct airflow across the interior while shedding rain, reducing condensation buildup that plagues single-layer shelters. Self-repairing zips on every opening hold up to repeated use in grit and dust.
Materials Built for Repeated Hard Use
The 400gsm proofed plain weave poly/cotton canvas (65/35 blend) is stitched with Tex 90 polycotton thread and fully seam-sealed, so there are no needle holes left open to water ingress. The HF-welded 550gsm PVC bucket floor bonds without stitching, eliminating the seam at the floor edge that is the most common leak point in canvas swags. The 9.5 mm stainless steel segmented arch poles resist corrosion in coastal and wet environments where aluminum poles can corrode over time. Storage pockets inside the shell and four weather awnings round out the practical details.
Features
- Freestanding segmental arch frame: 9.5 mm stainless steel poles, stable on uneven ground
- Four-way entry: zippered storm covers and insect mesh panels on all four sides
- HF-welded PVC bucket floor: 550gsm, weld-bonded (no floor seams to leak)
- 400gsm poly/cotton canvas shell: 65/35 blend, proofed, Tex 90 thread, fully seam-sealed
- 2.75-inch high-density foam mattress: polycotton cover, included
- Gusseted all-weather canopies: four awnings for ventilation and rain deflection
Specifications
| Specification | Detail |
|---|---|
| Shell Material | 400gsm proofed plain weave poly/cotton, 65/35 blend |
| Thread | Tex 90 polycotton |
| Mesh | PVC-coated poly super-fine insect mesh |
| Floor | HF-welded 550gsm PVC bucket floor |
| Pole System | 9.5 mm stainless steel segmented arch poles |
| Mattress | 2.75-inch high-density foam with polycotton cover |
| Open Dimensions | 85" L x 55" W x 33.5" H |
| Packed Dimensions | 57" L x 15.7" diameter (approx. roll) |
| Carry Bag Dimensions | 59" L x 17" W x 17" H |
| Weight | 37 lb |
| Warranty | 2 years |
| Included | Bandit 1400 Swag, 2.75" foam mattress, oversized canvas carry bag |
Who This Is For and Isn't
The Bandit 1400 suits solo overlanders, car campers, and hunters who want a ground-level sleep system that sets up fast, handles rain and insects without a separate tent footprint, and packs into a single roll. The 85 x 55-inch interior fits most adult sleepers comfortably.
The Bandit 1400 is a single-occupancy swag and does not accommodate two sleepers. It is a ground-dwelling shelter and is not designed for rooftop tent mounting or elevated platforms. No sleeping bag is included.
Common Questions
Does the Bandit 1400 include a sleeping bag or pillow?
The Bandit 1400 includes the swag shell, a 2.75-inch high-density foam mattress with a polycotton cover, and an oversized canvas carry bag. No sleeping bag or pillow is included; most users add their own bag rated to the expected overnight low.
How does the HF-welded PVC floor differ from a stitched floor?
High-frequency welding fuses the 550gsm PVC bucket floor to the shell walls without needle holes, eliminating the floor-edge seam that is the most common water ingress point in canvas swags. The result is a fully bonded, waterproof floor junction that does not require seam sealing after purchase.
What are the pole materials, and will they corrode?
The Bandit 1400 uses 9.5 mm stainless steel segmented arch poles. Stainless steel resists corrosion in coastal, wet, and high-humidity environments better than bare aluminum, making it a practical choice for users who camp near salt water or in consistently damp conditions.
Can the Bandit 1400 be set up on uneven or rocky ground?
The Bandit 1400's freestanding segmental arch design does not require staking to stand, so it can be positioned on hard, rocky, or uneven surfaces where tent pegs would not hold. Staking is still recommended in windy conditions for added stability.
How does the four-way entry work in rain?
Each of the four entry points on the Bandit 1400 has a zippered storm cover that closes over the insect mesh panel. The gusseted all-weather canopies above each opening deflect rain while still allowing airflow, so the swag can be ventilated in light rain without exposing the interior to water.
Share
