{"product_id":"renogy-anl-fuse-set-with-protective-cover-20a-400a","title":"Renogy ANL Fuse Set with Protective Cover 20A–400A","description":"\u003cp class=\"product-lead\"\u003eThe Renogy ANL Fuse Set is a replacement and installation fuse for off-grid solar, RV, van, and marine DC electrical systems, available in nine current ratings from 20A to 400A. Each set includes an ANL fuse and a clear, non-conductive protective cover sized to fit the Renogy ANL fuse block. The fuse body is constructed from alloy and brass copper, and the design includes ignition protection for safe use in enclosed spaces such as RVs and boats.\u003c\/p\u003e\n\n\u003ch2\u003eOvercurrent Protection Where the System Needs It Most\u003c\/h2\u003e\n\u003cp\u003eAn ANL fuse sits in the main DC cable run between the battery and the load (charge controller, inverter, or distribution panel) and is the last line of defense if a short circuit or overload occurs. Because it interrupts current before it can damage wiring or components, correct sizing matters: the fuse rating should be chosen based on the wire gauge and the maximum operating current of the protected circuit, not the component rating alone. Renogy's nine available ratings (20A through 400A) cover the range from small solar-only setups to large lithium battery banks driving high-wattage inverters, so the right fuse for the wire is available without upsizing to a holder designed for a different format.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Handle DC Electrical Environments\u003c\/h2\u003e\n\u003cp\u003eThe fuse body uses alloy and brass copper construction, materials chosen for conductivity and resistance to the vibration and temperature swings common in mobile and off-grid installations. The included clear protective cover is non-conductive and compatible with all nine current ratings, making it suitable for custom panel builds where the fuse is visible or accessible. The cover also reduces the risk of accidental contact with the fuse terminals during installation or service. Ignition protection is built into the design, qualifying the fuse for use in enclosed environments where flammable vapors may be present.\u003c\/p\u003e\n\n\u003ch2\u003eRoHS Compliant Construction\u003c\/h2\u003e\n\u003cp\u003eThe Renogy ANL fuse is RoHS compliant, meaning it is free from the restricted hazardous substances covered by that standard. This is relevant for builders who specify compliant components throughout a system, and for installations in regions or applications where RoHS compliance is required or preferred.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNine current ratings:\u003c\/strong\u003e available in 20A, 30A, 40A, 60A, 80A, 100A, 200A, 300A, and 400A to match a wide range of system sizes and wire gauges\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlloy and brass copper fuse body:\u003c\/strong\u003e durable construction suited to mobile and off-grid DC electrical environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded protective cover:\u003c\/strong\u003e clear, non-conductive cover compatible with all current ratings; ideal for custom installations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIgnition protection:\u003c\/strong\u003e safe for use in enclosed spaces including RVs, boats, and vans\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5\/16-inch stud terminals:\u003c\/strong\u003e accepts standard 5\/16-inch ring lugs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoHS compliant:\u003c\/strong\u003e free from restricted hazardous substances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue (All Variants)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAvailable Ratings\u003c\/td\u003e\n      \u003ctd\u003e20A, 30A, 40A, 60A, 80A, 100A, 200A, 300A, 400A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFuse Type\u003c\/td\u003e\n      \u003ctd\u003eANL\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTerminal Type\u003c\/td\u003e\n      \u003ctd\u003e5\/16-inch ring lug\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFuse Body Material\u003c\/td\u003e\n      \u003ctd\u003eAlloy and brass copper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProtective Cover\u003c\/td\u003e\n      \u003ctd\u003eIncluded; clear, non-conductive; compatible with all ratings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIgnition Protection\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRoHS Compliant\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003e40A Variant (RAD40ANL-RR08)\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRated Current\u003c\/td\u003e\n      \u003ctd\u003e40A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFuse Rated Voltage\u003c\/td\u003e\n      \u003ctd\u003e32VDC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFuse Dimensions\u003c\/td\u003e\n      \u003ctd\u003e124 × 37.6 × 37.5 mm \/ 4.88 × 1.48 × 1.48 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFuse Operating Temperature\u003c\/td\u003e\n      \u003ctd\u003e-40–125°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Cable Size\u003c\/td\u003e\n      \u003ctd\u003e8AWG\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Rated Voltage\u003c\/td\u003e\n      \u003ctd\u003e600VDC\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Length\u003c\/td\u003e\n      \u003ctd\u003e0.65 ft \/ 198 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Operating Temperature\u003c\/td\u003e\n      \u003ctd\u003e\u0026lt;105°C\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCable Testing Standard\u003c\/td\u003e\n      \u003ctd\u003eUL1015\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy ANL Fuse Set suits builders and owners of off-grid solar systems, RV house battery banks, van conversions, and marine DC installations who need a correctly rated overcurrent protection device in the main cable run between battery and load. With nine ratings from 20A to 400A, it covers systems from small solar-only setups to large lithium battery banks with high-wattage inverters.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis fuse set is designed to work with the Renogy ANL fuse block; compatibility with other brands' fuse holders depends on whether those holders accept a standard ANL fuse with 5\/16-inch stud terminals. Full dimensional and electrical specifications are published only for the 40A variant (RAD40ANL-RR08). Buyers selecting other ratings should confirm wire gauge and circuit requirements before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the fuse be replaced without replacing the entire holder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The ANL fuse is a separate, replaceable component: it can be removed from the fuse block and swapped out without replacing the holder or the protective cover.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat terminal size do these fuses use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL fuse uses 5\/16-inch stud terminals and accepts standard 5\/16-inch ring lugs, which are a common size for ANL fuse holders and heavy-gauge DC wiring.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I choose the right amperage rating for my system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eANL fuse sizing should be based on the wire gauge being protected and the maximum operating current of the circuit. A common guideline is to select a fuse rated at 1.25 times the maximum operating current of the protected device (for example, a 60A charge controller would pair with an 80A fuse), but wire gauge limits always take precedence.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this fuse safe to use in an enclosed space like an RV or van?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy ANL fuse includes ignition protection, which is the design feature that makes it safe for use in enclosed environments where flammable vapors may be present, including RVs, boats, and van conversions.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the protective cover do and does it fit all ratings?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe included clear protective cover is non-conductive and sits over the fuse body to reduce the risk of accidental contact with live terminals. It is compatible with all nine current ratings in the Renogy ANL fuse line (20A through 400A).\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"20A","offer_id":50657019527238,"sku":"RNG-SET-ANL20-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":50657019560006,"sku":"RNG-SET-ANL30-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":50657019592774,"sku":"RNG-SET-ANL40-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"60A","offer_id":50657019625542,"sku":"RNG-SET-ANL60-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"100A","offer_id":50657019658310,"sku":"RNG-SET-ANL100-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"200A","offer_id":50657019691078,"sku":"RPD200ANL-SET-G1-US","price":15.99,"currency_code":"USD","in_stock":true},{"title":"300A","offer_id":50657019723846,"sku":"RPD300ANL-SET-G1-US","price":15.99,"currency_code":"USD","in_stock":true},{"title":"400A","offer_id":50657019756614,"sku":"RPD400ANL-SET-G1-US","price":15.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__98513.1566152046.1280.1280.jpg?v=1792213426","url":"https:\/\/terrainvault.com\/products\/renogy-anl-fuse-set-with-protective-cover-20a-400a","provider":"TerrainVault","version":"1.0","type":"link"}