{"product_id":"renogy-amphenol-to-3-8-in-lug-adapter-cable","title":"Renogy Amphenol to 3\/8 in Lug Adapter Cable","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Amphenol Adapter Cable connects Renogy devices with an Amphenol port to a battery bank or busbar fitted with 3\/8 in ring lug terminals, using 10AWG tinned copper wire rated for 70A continuous current and 600V. Color-coded BAT+ and BAT- conductors reduce wiring errors during installation. The cable is sold as a pair and is available in a 5 ft or 10 ft length.\u003c\/p\u003e\n\n\u003ch2\u003eLocked In, Even Off-Road\u003c\/h2\u003e\n\u003cp\u003eThe Amphenol connector uses an integrated locking mechanism that resists loosening from vibration and mechanical shock. For overlanding rigs, van builds, and trailer installations where road vibration is constant, a connection that stays seated without periodic retightening means one fewer failure point to monitor between trips.\u003c\/p\u003e\n\n\u003ch2\u003eWeatherproof from Connector to Lug\u003c\/h2\u003e\n\u003cp\u003eAn IP67 protection rating means the cable assembly is sealed against dust ingress and can withstand temporary water immersion, which matters for engine-bay or underfloor battery runs where condensation, rain intrusion, or wash-down is possible. The tinned copper conductor resists corrosion over time, and the cable is rated to operate across a temperature range of -40°C to 105°C (-40°F to 221°F), covering cold-weather storage and high-heat engine-compartment environments.\u003c\/p\u003e\n\n\u003ch2\u003eColor-Coded for Accurate Polarity\u003c\/h2\u003e\n\u003cp\u003eThe BAT+ and BAT- wires are color-coded throughout the cable length, so polarity is visually confirmed at both the Amphenol end and the ring lug end before any connection is made. This matters most during initial installation in tight spaces where a reversed connection could damage connected equipment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmphenol locking connector:\u003c\/strong\u003e integrated lock prevents loosening or deformation under vibration\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIP67 rated:\u003c\/strong\u003e sealed against dust and temporary water immersion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10AWG tinned copper wire:\u003c\/strong\u003e rated 70A continuous current, 600V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor-coded conductors:\u003c\/strong\u003e BAT+ and BAT- labeled for polarity confirmation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e one positive and one negative cable per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003e5FT 10AWG\u003c\/th\u003e\n      \u003cth\u003e10FT 10AWG\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eRPC0510AR-G1-US\u003c\/td\u003e\n      \u003ctd\u003eRPC1010AR-G1-US\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLength\u003c\/td\u003e\n      \u003ctd\u003e5 ft\u003c\/td\u003e\n      \u003ctd\u003e10 ft\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWire gauge\u003c\/td\u003e\n      \u003ctd\u003e10AWG\u003c\/td\u003e\n      \u003ctd\u003e10AWG\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConductor\u003c\/td\u003e\n      \u003ctd\u003eTinned copper\u003c\/td\u003e\n      \u003ctd\u003eTinned copper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRated voltage\u003c\/td\u003e\n      \u003ctd\u003e600V\u003c\/td\u003e\n      \u003ctd\u003e600V\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax continuous current\u003c\/td\u003e\n      \u003ctd\u003e70A\u003c\/td\u003e\n      \u003ctd\u003e70A\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConnector (one end)\u003c\/td\u003e\n      \u003ctd\u003eAmphenol (70A, C10-791435)\u003c\/td\u003e\n      \u003ctd\u003eAmphenol (70A, C10-791435)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTerminal (other end)\u003c\/td\u003e\n      \u003ctd\u003e3\/8 in ring lugs (M8)\u003c\/td\u003e\n      \u003ctd\u003e3\/8 in ring lugs (M8)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOperating temperature\u003c\/td\u003e\n      \u003ctd\u003e-40°C to 105°C (-40°F to 221°F)\u003c\/td\u003e\n      \u003ctd\u003e-40°C to 105°C (-40°F to 221°F)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eProtection rating\u003c\/td\u003e\n      \u003ctd\u003eIP67\u003c\/td\u003e\n      \u003ctd\u003eIP67\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCertifications\u003c\/td\u003e\n      \u003ctd\u003eUL, RoHS, ISO 9001\u003c\/td\u003e\n      \u003ctd\u003eUL, RoHS, ISO 9001\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWarranty\u003c\/td\u003e\n      \u003ctd\u003e3 years (material and workmanship)\u003c\/td\u003e\n      \u003ctd\u003e3 years (material and workmanship)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight (shipped)\u003c\/td\u003e\n      \u003ctd\u003e0.62 lb\u003c\/td\u003e\n      \u003ctd\u003e1.21 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePackage contents\u003c\/td\u003e\n      \u003ctd\u003e1 pair of cables\u003c\/td\u003e\n      \u003ctd\u003e1 pair of cables\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis cable is for builders connecting a Renogy device with an Amphenol output port to a battery bank or busbar that uses 3\/8 in ring lug terminals, common in RV, van, trailer, and overlanding electrical systems where the Amphenol connector standard is already in use. The 5 ft length suits compact battery compartments; the 10 ft length accommodates longer runs between a charge controller or inverter and a remotely mounted battery.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cable terminates only in 3\/8 in (M8) ring lugs; installations requiring a different terminal size will need a different adapter. The 10AWG wire is rated to 70A; circuits requiring higher continuous current need a heavier gauge cable. An ANL fuse is not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices use the Amphenol connector this cable is designed for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Amphenol Adapter Cable is designed for Renogy devices that use the Amphenol 70A connector (specification C10-791435). The other end terminates in 3\/8 in (M8) ring lugs for connection to a battery bank or busbar. Confirm that the Renogy device in your system uses this Amphenol port before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes wire gauge affect how fast a battery charges?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWire gauge does not change the charge rate on its own. The charge controller or charger determines the current output. A heavier gauge wire allows more current to flow with less resistance over longer distances; undersized wire builds up heat as resistance increases. This cable's 10AWG conductor is rated for 70A continuous current at the lengths offered.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the ring lug terminal be replaced if it is damaged?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ring lug terminal on the Renogy Amphenol Adapter Cable is an M8 ring lug. If the terminal is damaged, a replacement terminal of the same M8 size can be crimped onto the wire. The Amphenol connector end uses the 70A Amphenol specification (C10-791435).\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs an ANL fuse included with this cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Renogy Amphenol Adapter Cable is sold as a pair of cables (positive and negative). An ANL fuse is not included and must be purchased separately for installations that require one between the cable and the battery bank.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"5 ft (10 AWG)","offer_id":50656999178310,"sku":"RPC0510AR-G1-US","price":59.99,"currency_code":"USD","in_stock":true},{"title":"10 ft (10 AWG)","offer_id":50656999211078,"sku":"RPC1010AR-G1-US","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1__79696.1735787371.1280.1280.jpg?v=1792209737","url":"https:\/\/terrainvault.com\/products\/renogy-amphenol-to-3-8-in-lug-adapter-cable","provider":"TerrainVault","version":"1.0","type":"link"}