{"product_id":"rago-fabrication-5th-gen-4runner-and-gx-470-air-mounts-set-of-4","title":"Rago Fabrication 5th Gen 4Runner and GX 470 Air Mounts Set of 4","description":"\u003cp class=\"product-lead\"\u003eThe Rago Fabrication Air Mounts are a set of four brushed aluminum wheel-well mounts designed to give 5th Gen Toyota 4Runner and GX 470 owners a secure, fast-connect point for an on-board air hose. Each mount installs using existing factory holes in the wheel well (some models require minimal drilling), and the full set of four covers a complete vehicle setup. Note: these mounts are not designed for the TRD PRO and would require modification to fit that model.\u003c\/p\u003e\n\n\u003ch2\u003eBrushed Aluminum That Will Not Rust\u003c\/h2\u003e\n\u003cp\u003eRago Fabrication builds these mounts from brushed aluminum and backs them with a rust-free guarantee. Wheel wells take a constant beating from mud, water, and road debris. A mount that corrodes becomes a mount that seizes, strips, or fails at the worst moment. Brushed aluminum sidesteps that problem entirely, keeping the connection point clean and functional across seasons of hard use without the maintenance overhead of a painted or coated steel part.\u003c\/p\u003e\n\n\u003ch2\u003eInstall Using Factory Holes\u003c\/h2\u003e\n\u003cp\u003eThe Air Mounts are engineered to use existing factory holes in the wheel well, so most installations require no drilling at all. On models where a small amount of drilling is needed, the work remains minimal and the overall install stays straightforward. Keeping the install simple means less time in the driveway and more confidence that the mount is seated correctly (no fabrication experience required).\u003c\/p\u003e\n\n\u003ch2\u003eFast Hose Connection at the Wheel Well\u003c\/h2\u003e\n\u003cp\u003ePositioning the air connection point at the wheel well puts it exactly where it is needed: close to the tire being inflated. With the mounts in place, connecting the air hose to the compressor is a quick operation rather than a routing exercise, which matters when airing up after a trail section or responding to a slow leak on the side of a road. The set of four covers all four corners of the vehicle.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSet of four:\u003c\/strong\u003e one mount per wheel well for full vehicle coverage\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrushed aluminum construction:\u003c\/strong\u003e corrosion-resistant material with a rust-free guarantee\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory-hole installation:\u003c\/strong\u003e mounts to existing wheel-well holes; minimal drilling required on some models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast hose connection:\u003c\/strong\u003e positions the air connection point at the wheel well for quick compressor hookup\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in USA:\u003c\/strong\u003e manufactured by Rago Fabrication in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eBrushed aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCorrosion resistance\u003c\/td\u003e\n      \u003ctd\u003eRust-free guarantee\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSet of 4\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation method\u003c\/td\u003e\n      \u003ctd\u003eFactory wheel-well holes; minimal drilling required on some models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e5th Gen Toyota 4Runner; GX 470\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTRD PRO compatibility\u003c\/td\u003e\n      \u003ctd\u003eNot designed for TRD PRO; modification required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n      \u003ctd\u003eUSA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese mounts suit 5th Gen Toyota 4Runner and GX 470 owners who are building or expanding an on-board air system and want a clean, permanent wheel-well connection point that installs without major fabrication work.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese mounts are not designed for the 4Runner TRD PRO; fitting that model would require modification. The mounts are fitment-specific to the 5th Gen 4Runner and GX 470 and are not a universal wheel-well mount.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat vehicles do these air mounts fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rago Fabrication Air Mounts are designed specifically for the 5th Gen Toyota 4Runner and the GX 470. They are not designed for the 4Runner TRD PRO; fitting that model would require modification. No other fitments are specified for this set.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need to drill to install these mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Air Mounts are engineered to use existing factory holes in the wheel well. On some 5th Gen 4Runner and GX 470 models, a small amount of drilling is required, but the overall installation is described as simple and does not require fabrication experience.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many mounts come in the set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach purchase includes a set of four Rago Fabrication Air Mounts (one for each wheel well), providing a complete air connection solution at all four corners of the vehicle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these mounts rust in wet or muddy conditions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Air Mounts are constructed from brushed aluminum, which does not rust, and Rago Fabrication backs them with a rust-free guarantee. Brushed aluminum is well suited to the wheel-well environment, which is regularly exposed to water, mud, and road debris.\u003c\/p\u003e","brand":"Rago Fabrication","offers":[{"title":"Default Title","offer_id":50629417828422,"sku":"R1418WIFEYAIRMOUNT-4RU","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4a9971cb-661f-441e-8d91-3c1093366cb1.jpg?v=1791946877","url":"https:\/\/terrainvault.com\/products\/rago-fabrication-5th-gen-4runner-and-gx-470-air-mounts-set-of-4","provider":"TerrainVault","version":"1.0","type":"link"}