{"product_id":"power-tank-quick-release-bracket-for-fire-extinguisher-and-co2-jack","title":"Power Tank Quick-Release Bracket for Fire Extinguisher and CO2 Jack","description":"\u003cp class=\"product-lead\"\u003eThe Power Tank Quick-Release Bracket is a 6061 billet aluminum mount that holds a 2.5 lb ABC dry chemical fire extinguisher and a Pro Eagle Phoenix CO2 jack in a single bracket. Machined to tight tolerances and finished with a matte anodized coating, it installs to flat surfaces, PALS\/MOLLE panels, roll cage tubes, or the side of a Power Tank 10 lb or 15 lb Super Bracket (BKT-2260 purchased 2021 or later).\u003c\/p\u003e\n\n\u003ch2\u003eOne-Handed Emergency Access\u003c\/h2\u003e\n\u003cp\u003eThe Quick-Release Bracket uses a pull-pin release with a bright red fabric pull attached to a steel lanyard. In an emergency, the pin stays tethered to the bracket so it cannot be lost, and the design allows a user to pull the pin and grab the extinguisher as two separate movements when only one hand is free. That combination of a high-visibility pull and a tethered pin reduces fumbling time when seconds matter on a trail.\u003c\/p\u003e\n\n\u003ch2\u003eVibration-Dampened Billet Construction\u003c\/h2\u003e\n\u003cp\u003eThe bracket is machined from 6061 billet aluminum with tight tolerances that minimize play between the extinguisher and the mount. Less play means less rattle over washboard roads and rocky terrain. After machining, each bracket is sandblasted and anodized in a matte, textured finish that resists corrosion and abrasion in the field.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Mounting for Any Rig Layout\u003c\/h2\u003e\n\u003cp\u003eThe Quick-Release Bracket flush-mounts to any flat surface using the included 1\/4-20 bolts, attaches to PALS or MOLLE panels with an optional backing plate, clamps to roll cage tubes from 1.5\" to 2.0\" diameter with optional roll bar clamps, or bolts directly to the side of a Power Tank Super Bracket (BKT-2260, 2021 or later). Two sets of hose clamps are included: one sized for the fire extinguisher (2.06\"–3.0\" ID) and one for the Pro Eagle Phoenix CO2 jack (2.56\"–3.5\" ID), so both can be staged in the same bracket without additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6061 billet aluminum construction:\u003c\/strong\u003e sandblasted and anodized in a matte, textured finish (silver or black)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual hose clamp sets included:\u003c\/strong\u003e 2.06\"–3.0\" ID for the fire extinguisher and 2.56\"–3.5\" ID for the CO2 jack\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRed fabric pull pin on steel lanyard:\u003c\/strong\u003e high-visibility, tethered release for one- or two-handed operation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour mounting options:\u003c\/strong\u003e flat surface, PALS\/MOLLE panel (optional backing plate), roll cage tube (optional roll bar clamps), or Power Tank Super Bracket BKT-2260 (2021 or later)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo 1\/4-20 bolts included\u003c\/strong\u003e for flat-surface installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e6061 billet aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eSandblasted and anodized, matte textured (silver or black)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose clamp set 1 (fire extinguisher)\u003c\/td\u003e\n      \u003ctd\u003e2.06\"–3.0\" ID\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHose clamp set 2 (CO2 jack)\u003c\/td\u003e\n      \u003ctd\u003e2.56\"–3.5\" ID\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded hardware\u003c\/td\u003e\n      \u003ctd\u003e(2) 1\/4-20 bolts, (2) sets of hose clamps\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible extinguisher size\u003c\/td\u003e\n      \u003ctd\u003e2.5 lb ABC dry chemical, 3\" diameter range\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible CO2 jack\u003c\/td\u003e\n      \u003ctd\u003ePro Eagle Phoenix CO2 jack\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSuper Bracket compatibility\u003c\/td\u003e\n      \u003ctd\u003ePower Tank BKT-2260 (purchased 2021 or later)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional accessories (sold separately)\u003c\/td\u003e\n      \u003ctd\u003eBacking plate (MOLLE\/PALS mount), roll bar clamps (1.5\", 1.75\", 1.875\", 2.0\" tubes)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eBKT-3031-BK\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Power Tank Quick-Release Bracket suits overlanders, 4x4 enthusiasts, and side-by-side riders who need a durable, quick-access mount for a 2.5 lb ABC dry chemical fire extinguisher (particularly those running organized group 4x4 events where a fire extinguisher is required) and who also carry a Pro Eagle Phoenix CO2 jack and want both staged in one accessible location.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe fire extinguisher and Pro Eagle Phoenix CO2 jack are sold separately and are not included. The bracket is designed for fire extinguishers in the 3\" diameter range; other extinguisher sizes are not supported. Mounting to a MOLLE panel requires the optional backing plate, and mounting to a roll cage requires the optional roll bar clamps. Neither accessory is included with the bracket.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size fire extinguisher does this bracket fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Quick-Release Bracket is designed for fire extinguishers in the 3\" diameter range. A 2.5 lb ABC dry chemical extinguisher is the recommended size. ABC dry chemical extinguishers address combustible, fluid, and electrical fire sources: the three types most relevant to a vehicle fire. The fire extinguisher is sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat mounting options are available, and what hardware is included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bracket includes two 1\/4-20 bolts for flush-mounting to any flat surface. It also attaches to PALS or MOLLE panels using an optional backing plate (sold separately) and to roll cage tubes from 1.5\" to 2.0\" diameter using optional roll bar clamps (sold separately). It can also bolt to the side of a Power Tank Super Bracket (BKT-2260 purchased in 2021 or later) without additional hardware.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the fire extinguisher be released with one hand?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Quick-Release Bracket's pull-pin design allows the pin to be pulled and the extinguisher to be grabbed as two separate movements, so a user with only one hand available can still access it. The pull pin has a bright red fabric pull for visibility and is attached to a steel lanyard so it stays tethered to the bracket rather than being dropped or lost.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bracket also hold a CO2 jack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Power Tank Quick-Release Bracket includes a second set of hose clamps (2.56\"–3.5\" ID) sized for the Pro Eagle Phoenix CO2 jack, so both the fire extinguisher and the CO2 jack can be mounted in the same bracket. The Pro Eagle Phoenix CO2 jack is sold separately and is not included with the bracket.\u003c\/p\u003e","brand":"Power Tank","offers":[{"title":"Default Title","offer_id":50621701980230,"sku":"BKT-3031-BK","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/BKT-3031-BK.jpg?v=1791936841","url":"https:\/\/terrainvault.com\/products\/power-tank-quick-release-bracket-for-fire-extinguisher-and-co2-jack","provider":"TerrainVault","version":"1.0","type":"link"}