{"product_id":"icon-vehicle-dynamics-2024-2026-toyota-tacoma-stage-3-tubular-overland","title":"ICON Vehicle Dynamics 2024-2026 Toyota Tacoma Stage 3 Tubular Overland Suspension System","description":"\u003cp class=\"product-lead\"\u003eThe ICON Vehicle Dynamics Stage 3 Tubular Overland Suspension System is a complete front-and-rear upgrade for 2024–2026 Toyota Tacoma trucks, delivering 1.25–3\" of adjustable front lift and 0.5\" of rear lift (at approximately 600 lb of added rear weight) through a matched set of 2.5 Series coilovers, tubular upper control arms with the Delta Joint PRO, a front differential drop kit, 2.0 Aluminum Series remote-reservoir rear shocks, and dual-rate Overland rear coil springs. This kit is configured for 4WD Tacomas; see application notes for 2WD fitment details.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eIncreased Travel Without CV Bind\u003c\/h2\u003e\n\u003cp\u003eThe 2.5 Series coilovers pair internal reservoirs with vehicle-specific valving to manage heat during sustained off-road use, where shock fade is a real concern. ICON's coilover lengths are matched to front differential drop brackets (part 55160, included for 4WD) so the front suspension reaches its full available travel without forcing the CV axles into bind, a condition that causes premature joint wear and limits how far the suspension can actually move. Polyurethane differential mounting bushings replace the softer OE units to reduce differential movement under load, keeping the geometry consistent when it matters most.\u003c\/p\u003e\n\n\u003ch2\u003eCorrected Geometry Through the Full Range of Motion\u003c\/h2\u003e\n\u003cp\u003eThe tubular upper control arms replace the OE stamped arms with corrected front-end geometry and additional built-in caster, which improves straight-line stability and steering feel after a lift. The ICON Delta Joint PRO (U.S. Pat. 10,731,700) replaces the OE ball joint with a serviceable, rebuildable unit rated for 90 degrees of total articulation, allowing full bump and droop travel without the bind that limits stock ball joints at lifted ride heights. FK Rod End bearings at key pivot points are specified for longevity and minimal deflection under load.\u003c\/p\u003e\n\n\u003ch2\u003eRear Tune Built for Loaded Overlanders\u003c\/h2\u003e\n\u003cp\u003eThe dual-rate Overland rear coil springs use a softer primary rate for unladen on-road comfort and a firmer overload rate that engages as cargo weight increases, providing bottoming resistance and load support for outfitted trucks without a harsh empty ride. The 2.0 Aluminum Series remote-reservoir rear shocks add cooling capacity at the rear to match the front coilovers, with vehicle-specific valving that balances damping front to rear. The rear lift target of 0.5\" is calibrated for approximately 600 lb of added rear weight; actual lift will vary with vehicle load.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5 Series front coilovers:\u003c\/strong\u003e internal reservoirs, vehicle-specific valving, height-adjustable 1.25–3\" front lift over stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTubular UCAs with Delta Joint PRO:\u003c\/strong\u003e corrected geometry, added caster, 90° articulation, serviceable and rebuildable (U.S. Pat. 10,731,700)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront differential drop kit (4WD):\u003c\/strong\u003e maximizes front suspension travel and prevents CV bind\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.0 Aluminum Series remote-reservoir rear shocks:\u003c\/strong\u003e improved cooling, vehicle-specific valving, 5\/8\" shafts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-rate Overland rear coil springs:\u003c\/strong\u003e 0.5\" rear lift at ~600 lb added weight, bottoming resistance, load support\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6061 aircraft-grade aluminum CNC-machined components:\u003c\/strong\u003e corrosion-resistant CAD-plated coilover bodies, 7\/8\" front shafts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Toyota Tacoma (4WD configured; see notes for 2WD)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Lift Range\u003c\/td\u003e\n      \u003ctd\u003e1.25–3\" over stock (height adjustable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Lift\u003c\/td\u003e\n      \u003ctd\u003e~0.5\" over stock at approximately 600 lb added rear weight\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Shocks\u003c\/td\u003e\n      \u003ctd\u003e2.5 Series coilovers with internal reservoirs, 7\/8\" shafts, CAD-plated bodies\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Shocks\u003c\/td\u003e\n      \u003ctd\u003e2.0 Aluminum Series remote-reservoir, 5\/8\" shafts\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUpper Control Arms\u003c\/td\u003e\n      \u003ctd\u003eTubular, with Delta Joint PRO (rebuildable), FK Rod End bearings\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Wheels and Tires\u003c\/td\u003e\n      \u003ctd\u003eCompatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Aftermarket Wheels\u003c\/td\u003e\n      \u003ctd\u003eICON Alloys 17x8.5 \/ 5.75\" backspace \/ 25mm offset; or 18x9 \/ 6.00\" backspace \/ 25mm offset\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Aftermarket Tires\u003c\/td\u003e\n      \u003ctd\u003e33x11.50\" (larger tires may fit but require fender trimming)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eK53293TX\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e142 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis system suits 2024–2026 Toyota Tacoma 4WD owners who want a complete, geometry-corrected lift with matched front and rear damping for overlanding and off-road use, particularly trucks carrying significant rear loads such as bed racks, gear, or a bed-mounted tent.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis kit will not fit Tacoma submodels equipped with rear leaf springs. It is not compatible with Adaptive Variable Suspension (AVS) equipped vehicles. Advanced Driver Assistance Systems (ADAS) require recalibration after installation. On 2WD Tacomas, the front differential drop (part 55160) is not needed; remaining components are available individually, and a 2WD-specific kit is not yet available. Advertised lift height assumes approximately 600 lb of added rear weight; actual lift varies with vehicle load.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this kit fit both 4WD and 2WD 2024–2026 Tacomas?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stage 3 Tubular Overland kit is configured for 4WD Tacomas and includes the front differential drop kit (part 55160) required for 4WD models. On a 2WD Tacoma, the differential drop is not needed, and the remaining suspension components can be purchased individually for full system functionality. A 2WD-specific complete kit is not yet available.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this kit work on a Tacoma with Adaptive Variable Suspension?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 3 Tubular Overland system is not compatible with Tacoma trims equipped with Adaptive Variable Suspension (AVS). Confirm your Tacoma's suspension configuration before ordering.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much rear lift does this system provide?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe dual-rate Overland rear coil springs are designed to net approximately 0.5\" of rear lift over stock when the vehicle carries approximately 600 lb of additional weight in the rear. Actual lift height will increase or decrease depending on how the truck is loaded.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo OEM wheels and tires fit after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, OEM wheels and tires are confirmed compatible with this Stage 3 system. For aftermarket fitment, ICON specifies 17x8.5 wheels with 5.75\" backspace and 25mm offset, or 18x9 wheels with 6.00\" backspace and 25mm offset, paired with 33x11.50\" tires. Larger tires may fit but can require fender trimming.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs ADAS recalibration required after installing this suspension system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Installing the ICON Stage 3 Tubular Overland system changes the vehicle's ride height and geometry, which requires recalibration of Advanced Driver Assistance Systems (ADAS). This recalibration is not included with the kit and should be performed by a qualified shop after installation.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50629657690182,"sku":"K53293TX","price":3565.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/59ab2aa735d9942ed5d3b6dcf1f21a5e-sq.jpg?v=1791950390","url":"https:\/\/terrainvault.com\/products\/icon-vehicle-dynamics-2024-2026-toyota-tacoma-stage-3-tubular-overland","provider":"TerrainVault","version":"1.0","type":"link"}