{"product_id":"icon-vehicle-dynamics-2-0-aluminum-series-remote-reservoir-front-shock","title":"ICON Vehicle Dynamics 2.0 Aluminum Series Remote Reservoir Front Shock 7.5\" Travel","description":"\u003cp class=\"product-lead\"\u003eThe ICON Vehicle Dynamics 2.0 Aluminum Series Remote Reservoir Front Shock is a universal-mount, nitrogen-charged monotube shock absorber with 7.5 inches of shaft travel, built for street drivers and off-road enthusiasts who want a rebuildable, revalveable upgrade over factory dampers. Because this shock is not application-specific, installation requires custom fabrication to mount to the vehicle.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eRemote Reservoir for Sustained Performance\u003c\/h2\u003e\n\u003cp\u003eThe remote reservoir increases shock oil volume and expands the heat dissipation surface area beyond what a standard body-only shock can provide. Under repeated hard use (water crossings, washboard roads, or extended trail runs), that added volume helps resist the oil aeration and cavitation that cause damper fade. The result is more consistent damping force late in a run, when a smaller shock would already be losing response.\u003c\/p\u003e\n\n\u003ch2\u003eAluminum Construction with a Rebuildable Design\u003c\/h2\u003e\n\u003cp\u003eThe shock body and reservoir tubing are 6063 anodized aluminum, chosen for heat dissipation and corrosion resistance. The rod end, top cap, and internals are 6061 aluminum. The 5\/8-inch chrome-plated hardened steel shaft resists corrosion and surface pitting over time. Polyurethane bushings, zinc-plated sleeves, and forged steel mounting stems are included for OE-style fitment at the mount points.\u003c\/p\u003e\n\u003cp\u003eEvery 2.0 Aluminum Series shock is 100% rebuildable and 100% revalveable, so the shock can be serviced or retuned rather than replaced when valving needs change or wear accumulates.\u003c\/p\u003e\n\n\u003ch2\u003eValving and Oil\u003c\/h2\u003e\n\u003cp\u003eThe one-piece linear\/digressive piston uses vehicle-specific valving and runs on premium-grade 5WT shock oil, which maintains consistent damping across a wide temperature range. The nitrogen-charged monotube design separates oil from gas to prevent foaming under load.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNitrogen-charged monotube:\u003c\/strong\u003e remote reservoir with one-piece linear\/digressive piston\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5WT shock oil:\u003c\/strong\u003e consistent damping across a wide temperature range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5\/8\" chrome-plated hardened steel shaft:\u003c\/strong\u003e resists corrosion and surface pitting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6063 anodized aluminum body and reservoir:\u003c\/strong\u003e heat dissipation and corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% rebuildable and revalveable:\u003c\/strong\u003e serviceable and retunable without full replacement\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNitrile rubber top-out bumper:\u003c\/strong\u003e noise-free operation at full extension\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eValue\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody diameter\u003c\/td\u003e\n      \u003ctd\u003e2.0 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShaft travel\u003c\/td\u003e\n      \u003ctd\u003e7.45 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eExtended length\u003c\/td\u003e\n      \u003ctd\u003e19.00 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompressed length\u003c\/td\u003e\n      \u003ctd\u003e11.55 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShaft diameter\u003c\/td\u003e\n      \u003ctd\u003e5\/8 in, chrome-plated hardened steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBody and reservoir material\u003c\/td\u003e\n      \u003ctd\u003e6063 anodized aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRod end, top cap, internals\u003c\/td\u003e\n      \u003ctd\u003e6061 aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting\u003c\/td\u003e\n      \u003ctd\u003eUpper and lower eyelets; 1.5 in width between tabs, 0.5 in diameter bolt\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShock oil\u003c\/td\u003e\n      \u003ctd\u003ePremium-grade 5WT\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003e206511R\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping weight\u003c\/td\u003e\n      \u003ctd\u003e7 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003eUniversal; not application-specific. Custom fabrication required to mount.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis shock suits builders and fabricators constructing a custom suspension setup who need a high-quality, rebuildable 2.0-inch remote reservoir monotube shock and have the means to fabricate or source custom mounting hardware for their specific vehicle.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis shock does not include application-specific mounting brackets and is not a bolt-on replacement for any specific make, model, or year of vehicle. Buyers expecting a direct-fit drop-in shock for a named truck or SUV should look at ICON's application-specific 2.0 Series kits instead. This shock is sold individually; a complete suspension system requires additional components.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this shock bolt directly onto my truck or SUV?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON 2.0 Aluminum Series Remote Reservoir Front Shock is a universal-mount unit, not application-specific. Mounting it to a vehicle requires custom fabrication. Buyers who need a direct bolt-on solution should look at ICON's vehicle-specific 2.0 Series shock kits, which include application-matched mounting hardware.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat are the extended and compressed lengths?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis shock measures 19.00 inches extended and 11.55 inches compressed, with 7.45 inches of shaft travel. These dimensions are the starting point for calculating whether the shock fits a given suspension geometry before fabricating mounts.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this shock be rebuilt or revalved if the damping needs to change?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Every ICON 2.0 Aluminum Series shock is 100% rebuildable and 100% revalveable, meaning the internals can be serviced and the valving can be changed to suit a different vehicle weight, spring rate, or use case without replacing the entire shock body.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs the remote reservoir included, or is it a separate purchase?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe remote reservoir is part of this shock as sold under SKU 206511R. Application-specific reservoir mounting hardware is included. An optional billet reservoir clamp kit and reservoir hose shield kit are available separately if additional mounting or protection is needed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this product carry a California Proposition 65 warning?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm. This warning applies to California residents as required by Proposition 65.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50631211417670,"sku":"206511R","price":308.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4229036f1b99e4f9ef78696f51c096ca_81b6ca32-5f75-4908-9d38-ee2-sq.jpg?v=1791964742","url":"https:\/\/terrainvault.com\/products\/icon-vehicle-dynamics-2-0-aluminum-series-remote-reservoir-front-shock","provider":"TerrainVault","version":"1.0","type":"link"}