{"product_id":"icon-stage-6-suspension-system-with-tubular-uca-for-2010-2024-toyota-4","title":"ICON Stage 6 Suspension System with Tubular UCA for 2010-2024 Toyota 4Runner \/ 2010-2014 FJ Cruiser","description":"\u003cp class=\"product-lead\"\u003eThe ICON Stage 6 Suspension System with Tubular UCA is a complete front-and-rear upgrade for 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser, delivering 0-3.5 inches of adjustable front lift and 2 inches of rear lift over stock. The system pairs 2.5-inch extended-travel remote-reservoir coilovers up front with 2.5 Aluminum Series remote-reservoir shocks and tubular steel links in the rear, and includes ICON's patented Delta Joint upper control arms for improved alignment geometry at lift height.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eExtended Travel and Damping Where It Counts\u003c\/h2\u003e\n\u003cp\u003eThe front 2.5-inch coilovers are vehicle-specifically tuned and feature remote reservoirs that increase cooling capacity during sustained off-road use, maintaining consistent damping force when heat would otherwise degrade performance. The rear 2.5 Aluminum Series shocks include an internal Bump Zone that adds 20% of damping force near the end of travel, reducing hard bottom-outs on rough terrain. Together, the front and rear shocks are matched as a system so damping characteristics work in concert rather than independently.\u003c\/p\u003e\n\n\u003ch2\u003eAlignment Geometry Retained at Lift Height\u003c\/h2\u003e\n\u003cp\u003eICON's tubular Delta Joint upper control arms replace the OEM units and are engineered to restore factory alignment specs and increase caster at the lift heights this system provides. The Delta Joint itself is a high-angle ball joint with a zinc-plated housing and grease seal, combining the angularity of a uniball with the weather resistance and greaseable longevity of a conventional ball joint. The tubular steel upper and lower rear trailing arms are adjustable for pinion angle and are stronger than OEM units, using a multi-durometer bushing that requires minimal maintenance.\u003c\/p\u003e\n\n\u003ch2\u003eRear Leveling and Axle Alignment Included\u003c\/h2\u003e\n\u003cp\u003eThe 2-inch rear coil springs bring the rear ride height level with the front lift, avoiding the nose-up stance common with front-only lift kits. An adjustable rear track bar is included specifically to correct rear axle placement after the lift and to ensure compatibility with KDSS-equipped 4Runners, where the front sway bar relocation brackets are not used.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable front lift:\u003c\/strong\u003e 0-3.5 inches over stock via coilover preload collar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5\" remote-reservoir coilovers (front):\u003c\/strong\u003e extended travel, vehicle-specific tuning, 7\/8\" shaft, FK rod end bearings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5 Aluminum Series remote-reservoir shocks (rear):\u003c\/strong\u003e internal Bump Zone adds 20% damping force near end of travel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTubular Delta Joint UCAs:\u003c\/strong\u003e patented high-angle ball joint with zinc-plated housing and grease seal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTubular rear trailing arms:\u003c\/strong\u003e upper and lower, adjustable for pinion angle, multi-durometer bushings\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdjustable rear track bar:\u003c\/strong\u003e corrects axle alignment post-lift; compatible with KDSS-equipped 4Runners\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6061 aircraft-grade aluminum CNC-machined components\u003c\/strong\u003e and CAD-plated coilover shock body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eK53066T\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2010-2024 Toyota 4Runner; 2010-2014 Toyota FJ Cruiser\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront lift range\u003c\/td\u003e\n      \u003ctd\u003e0-3.5 inches over stock (adjustable)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear lift height\u003c\/td\u003e\n      \u003ctd\u003e2 inches over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront shock diameter\u003c\/td\u003e\n      \u003ctd\u003e2.5 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear shock series\u003c\/td\u003e\n      \u003ctd\u003e2.5 Aluminum Series with remote reservoir\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShock shaft diameter\u003c\/td\u003e\n      \u003ctd\u003e7\/8 inch (front and rear)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUpper control arms\u003c\/td\u003e\n      \u003ctd\u003eTubular steel with Delta Joint (patented high-angle ball joint)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear links\u003c\/td\u003e\n      \u003ctd\u003eTubular steel upper and lower trailing arms, adjustable for pinion angle\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM wheel\/tire fitment\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping weight\u003c\/td\u003e\n      \u003ctd\u003e185 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCalifornia Prop 65\u003c\/td\u003e\n      \u003ctd\u003eWARNING: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis system suits 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser owners who want a complete, matched front-and-rear suspension upgrade with 0-3.5 inches of adjustable front lift, improved wheel travel, and corrected alignment geometry for daily driving and off-road use. It is compatible with KDSS-equipped 4Runners.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis system requires aftermarket upper control arms and is not designed for use with OEM UCAs (Application Note 18). Remote reservoir mounting brackets may interfere with aftermarket bumper mounts and windshield washer bottles (Application Note 35). Certain model years require trimming for front reservoir bracket fitment (Application Note 46). Coilover ride heights are calibrated for a stock-equipped vehicle; a heavier-built vehicle may require the optional 700 lb\/in Expedition Coil (Application Note 47). This system does not fit any Toyota 4Runner or FJ Cruiser outside the stated model years.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this system compatible with KDSS-equipped 4Runners?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 6 system is compatible with KDSS-equipped Toyota 4Runners. On KDSS vehicles, the front sway bar relocation brackets included in the system are not used. An adjustable rear track bar is included to ensure proper rear axle alignment on KDSS and non-KDSS 4Runners alike.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this system work with OEM wheels and tires?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 6 system is confirmed to fit with OEM wheels and tires. The front coilovers are adjustable from 0 to 3.5 inches of lift over stock, so the system can be set at a height compatible with factory wheel and tire sizing.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the coilover height be adjusted after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe front coilovers in this Stage 6 system are height-adjustable via a preload collar, allowing 0 to 3.5 inches of front lift over stock. Coilover heights stated by ICON are based on a stock-equipped vehicle; a heavily accessorized build may sit lower than indicated at a given collar setting.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the Delta Joint and why does it matter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Delta Joint is ICON's patented high-angle ball joint used in the tubular upper control arms included with this system. It combines the wide articulation range of a uniball with the weather resistance of a conventional ball joint, using a zinc-plated housing and grease seal to keep contaminants out and extend service life in daily-driven and off-road conditions.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre the shocks in this system serviceable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe front and rear shocks in the ICON Stage 6 system are fully serviceable, per ICON's own product notes. Remote reservoirs on both the front coilovers and rear 2.5 Aluminum Series shocks help extend service intervals by keeping operating temperatures lower during heavy use.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50629753372742,"sku":"K53066T","price":5760.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/ae3a8c7523770cfd76c5cdef16ffcce0_d3fcb1a3-4f00-40f3-b7ed-39d-sq.jpg?v=1791951510","url":"https:\/\/terrainvault.com\/products\/icon-stage-6-suspension-system-with-tubular-uca-for-2010-2024-toyota-4","provider":"TerrainVault","version":"1.0","type":"link"}