{"product_id":"icon-stage-5-suspension-system-for-1995-5-2004-toyota-tacoma-0-3-lift","title":"ICON Stage 5 Suspension System for 1995.5-2004 Toyota Tacoma 0-3\" Lift Tubular UCA","description":"\u003cp class=\"product-lead\"\u003eThe ICON Vehicle Dynamics Stage 5 Suspension System for 1995.5–2004 Toyota Tacoma (4WD and PreRunner) delivers 0–3\" of front lift height through 2.5 Series extended-travel coilovers with CDC Valves and remote reservoirs, paired with tubular upper control arms featuring the patented Delta Joint, and a rear package combining an Add-A-Leaf kit with 2.0 Aluminum Series remote reservoir shocks. SKU K53015 fits 4WD and PreRunner configurations only.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eTunable Compression Damping Front and Rear\u003c\/h2\u003e\n\u003cp\u003eThe front 2.5 Series coilovers carry CDC (Compression Damping Control) Valves that give the driver 10 settings of compression adjustment, from soft to firm, without tools beyond the valve itself. That range matters on a truck that sees highway miles one day and washboard two-tracks the next: dialing softer absorbs chatter and reduces fatigue, while firming up controls body roll under load or at speed. Remote reservoirs extend cooling capacity so damping stays consistent late in a long off-road run rather than fading as fluid heats up.\u003c\/p\u003e\n\n\u003ch2\u003eDelta Joint UCAs: Durability Without the Uniball Trade-Off\u003c\/h2\u003e\n\u003cp\u003eThe tubular upper control arms use ICON's patented Delta Joint (U.S. Pat. 10,731,700), a high-angle ball joint that matches the articulation range of a uniball while adding a zinc-plated housing and a grease seal that keeps contaminants out of the joint internals. The greasable, metal-on-metal design extends service life and eliminates the noise that worn uniballs develop. For a Tacoma used daily as well as off-road, the Delta Joint's corrosion resistance is a practical advantage over an exposed uniball that standard maintenance cannot fully protect.\u003c\/p\u003e\n\n\u003ch2\u003eRear Compliance via Add-A-Leaf and 2.0 Series Shocks\u003c\/h2\u003e\n\u003cp\u003eThe included Add-A-Leaf kit installs in place of the factory overload leaves, reducing rear spring rate by approximately 10% for a more compliant ride over rough surfaces while adding 1.5\" of rear lift over stock. Two ICON 2.0 Aluminum Series remote reservoir rear shocks with vehicle-specific valving balance the rear damping to the front coilovers, so the truck's handling character stays consistent rather than having a soft front and stiff rear.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.5 Series front coilovers:\u003c\/strong\u003e extended travel, remote reservoirs, CDC Valves with 10 compression settings, 0–3\" height adjustable, 7\/8\" shafts, CAD-plated bodies\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTubular UCAs with Delta Joint:\u003c\/strong\u003e patented high-angle ball joint, zinc-plated housing, grease seal, greasable design (U.S. Pat. 10,731,700)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdd-A-Leaf rear kit:\u003c\/strong\u003e replaces OE overload leaf, approximately 10% lower rear spring rate, 1.5\" rear lift over stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e2.0 Aluminum Series rear shocks:\u003c\/strong\u003e remote reservoirs, vehicle-specific valving, 5\/8\" shafts, qty 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6061 aircraft-grade aluminum CNC components:\u003c\/strong\u003e used throughout coilover construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFK Rod End bearings:\u003c\/strong\u003e on UCAs for extended longevity and minimal deflection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eK53015\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e1995.5–2004 Toyota Tacoma 4WD and PreRunner\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLift Range (front)\u003c\/td\u003e\n      \u003ctd\u003e0–3\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Lift\u003c\/td\u003e\n      \u003ctd\u003e1.5\" over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Shock Diameter\u003c\/td\u003e\n      \u003ctd\u003e2.5 Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Shaft Diameter\u003c\/td\u003e\n      \u003ctd\u003e7\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Shock Series\u003c\/td\u003e\n      \u003ctd\u003e2.0 Aluminum Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Shaft Diameter\u003c\/td\u003e\n      \u003ctd\u003e5\/8\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCDC Valve Settings\u003c\/td\u003e\n      \u003ctd\u003e10 (compression, soft to firm)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Spring Rate Change\u003c\/td\u003e\n      \u003ctd\u003eApproximately 10% reduction vs. OE overload\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Wheels and Tires\u003c\/td\u003e\n      \u003ctd\u003eCompatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping Weight\u003c\/td\u003e\n      \u003ctd\u003e131 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eComponent Kits Included\u003c\/td\u003e\n      \u003ctd\u003e58715C (front coilover kit), 58400DJ (tubular UCA kit), 51100 (Add-A-Leaf kit), 56502R ×2 (rear shocks)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis system suits 1995.5–2004 Toyota Tacoma owners running a 4WD or PreRunner configuration who want 0–3\" of adjustable front lift, extended wheel travel, and tunable compression damping for mixed on-road and off-road use. OEM wheel and tire combinations fit without modification; 33\" x 11.50\" tires are the recommended aftermarket size.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis system will not fit 2WD Tacoma variants with 5 wheel lug studs. It requires aftermarket upper control arms (included in this kit) and is not compatible with the factory UCAs. Larger tires beyond 33\" x 11.50\" may require fender trimming and additional modifications not included in this kit. A 700 lb\/in expedition coil spring for heavier-equipped vehicles and a bump stop spacer kit are available separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this Stage 5 system fit a 2WD Toyota Tacoma?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 5 system (K53015) does not fit 2WD Tacoma variants with 5 wheel lug studs. It is engineered specifically for 1995.5–2004 Toyota Tacoma 4WD and PreRunner configurations only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the CDC Valve do and how is it adjusted?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe CDC (Compression Damping Control) Valve on the front coilovers provides 10 settings of compression adjustment, from soft to firm. The valve is end-user adjustable, allowing the driver to tune ride quality for different terrain types and cargo loads without removing the shock from the vehicle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat rear lift does this system provide?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe included Add-A-Leaf kit provides approximately 1.5\" of rear lift over stock. It installs in place of the factory overload leaves and also reduces rear spring rate by approximately 10% for a more compliant ride. The 2.0 Aluminum Series rear shocks are valved to balance the rear to the front coilovers.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill factory wheels and tires fit after installing this system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The ICON Stage 5 system for 1995.5–2004 Toyota Tacoma is confirmed compatible with OEM wheels and tires. The recommended aftermarket tire size is 33\" x 11.50\"; tires larger than that may require fender trimming and additional modifications.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre the front coilovers serviceable, and what are the coilover height measurements based on?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe front 2.5 Series coilovers in this Stage 5 system are fully serviceable. Coilover height measurements are based on a stock-equipped vehicle; actual ride height will vary with accessories, cargo, and aftermarket components added to the truck.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50629331025990,"sku":"K53015","price":3943.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/80a4e3e36e93dc4ee7dea8beea18ec2e-sq.jpg?v=1791944990","url":"https:\/\/terrainvault.com\/products\/icon-stage-5-suspension-system-for-1995-5-2004-toyota-tacoma-0-3-lift","provider":"TerrainVault","version":"1.0","type":"link"}