{"product_id":"icon-stage-1-suspension-system-for-1991-97-toyota-land-cruiser-80-seri","title":"ICON Stage 1 Suspension System for 1991-97 Toyota Land Cruiser 80 Series 3-Inch Lift","description":"\u003cp class=\"product-lead\"\u003eThe ICON Stage 1 Suspension System for the 1991–97 Toyota Land Cruiser 80 Series delivers a 3-inch lift engineered to improve on-road handling while expanding off-road capability, using ICON 2.0 Aluminum Series IFP shocks, dual rate coil springs, and all hardware required for a fully bolt-on installation.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eMore Travel, Front and Rear\u003c\/h2\u003e\n\u003cp\u003eThe Stage 1 system increases front wheel travel by approximately 40% over stock and rear wheel travel by approximately 35% over stock. That additional suspension articulation translates directly to better wheel contact on uneven terrain, keeping the truck planted where a stock suspension would lose traction, without sacrificing the compliance needed for daily driving.\u003c\/p\u003e\n\n\u003ch2\u003eShocks Built for This Truck\u003c\/h2\u003e\n\u003cp\u003eThe 2.0 Aluminum Series shocks use an internal floating piston (IFP) design with a 5\/8-inch shaft and a corrosion-resistant anodized 6061 aircraft-grade aluminum body. Valving is tuned specifically for the 80 Series, balancing damping front to rear rather than applying a generic tune. The result is controlled body motion on pavement and predictable damping behavior on trail.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Fabrication\u003c\/h2\u003e\n\u003cp\u003eThe Stage 1 kit includes dual rate coil springs, caster correction bushings, sway bar relocation hardware, a brake line kit, and all bracketry, and every piece installs without drilling, cutting, or welding. The 4.6-degree caster correction kit restores factory steering geometry at the lifted ride height. All shocks are fully serviceable after installation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-inch lift height:\u003c\/strong\u003e engineered around a typical loaded 80 Series build with heavier front bumper, winch, and rear bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e~40% more front wheel travel \/ ~35% more rear wheel travel\u003c\/strong\u003e over stock\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eICON 2.0 Aluminum Series IFP shocks:\u003c\/strong\u003e vehicle-specific valving, 5\/8-inch shaft, anodized 6061 aluminum body, front and rear\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual rate coil springs:\u003c\/strong\u003e ICON-engineered front and rear kits for on-road compliance and off-road performance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.6-degree caster correction kit:\u003c\/strong\u003e restores steering geometry at lift height\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% bolt-on:\u003c\/strong\u003e no drilling, cutting, or welding required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e1991–97 Toyota Land Cruiser 80 Series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLift Height\u003c\/td\u003e\n      \u003ctd\u003e3 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Wheel Travel Increase\u003c\/td\u003e\n      \u003ctd\u003eApproximately 40% over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear Wheel Travel Increase\u003c\/td\u003e\n      \u003ctd\u003eApproximately 35% over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShock Series\u003c\/td\u003e\n      \u003ctd\u003eICON 2.0 Aluminum Series IFP\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShock Shaft Diameter\u003c\/td\u003e\n      \u003ctd\u003e5\/8 inch\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShock Body Material\u003c\/td\u003e\n      \u003ctd\u003eAnodized 6061 aircraft-grade aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCaster Correction\u003c\/td\u003e\n      \u003ctd\u003e4.6 degrees\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM Wheels and Tires Fitment\u003c\/td\u003e\n      \u003ctd\u003eYes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Aftermarket Wheels\u003c\/td\u003e\n      \u003ctd\u003e17x8.5 inches with 4.63-inch backspace\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecommended Aftermarket Tires\u003c\/td\u003e\n      \u003ctd\u003e33x11.50 inches (larger tires may require fender trimming)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eKit Weight (shipped)\u003c\/td\u003e\n      \u003ctd\u003e109 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eK53091\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis system suits 1991–97 Toyota Land Cruiser 80 Series owners who want a 3-inch lift with meaningfully more wheel travel for off-road use while retaining a composed on-road ride. The bolt-on design makes it accessible to builders who want a complete, engineered kit rather than sourcing components individually.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe included brake line kit (part 53009) fits 1993–97 Land Cruisers only, not 1991–92 models. Owners of 1991–92 trucks should confirm brake line compatibility before ordering. This system is not a universal fit and is not designed for any other Toyota model or generation. Tires larger than 33x11.50 inches may require fender trimming or additional modifications.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich model years does this suspension system fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 1 system is designed for the 1991–97 Toyota Land Cruiser 80 Series. Note that the included brake line kit fits 1993–97 models only; owners of 1991–92 trucks should verify brake line compatibility separately before purchasing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require cutting, drilling, or welding?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Stage 1 system is a 100% bolt-on kit. All bracketry and hardware required for installation are included, and no drilling, cutting, or welding is necessary to complete the install.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat shocks are included, and are they serviceable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe kit includes two ICON 2.0 Aluminum Series IFP front shocks and two ICON 2.0 Aluminum Series IFP rear shocks, all with vehicle-specific valving and a 5\/8-inch shaft. The shocks are fully serviceable after installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the lift height be exactly 3 inches on my truck?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eICON's advertised 3-inch lift height is based on a typical loaded 80 Series build that includes added weight from a heavier front bumper, winch, and rear bumper. On a stock-weight vehicle, actual lift height may be higher than 3 inches.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this system work with stock wheels and tires?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, the Stage 1 system is confirmed compatible with OEM wheels and tires. For aftermarket fitment, ICON recommends 17x8.5-inch wheels with 4.63-inch backspace and 33x11.50-inch tires; tires larger than that may require fender trimming or other modifications.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50632387952710,"sku":"K53091","price":1950.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/a162b95c940a6ae0282cc60ec7ec20c0-sq.jpg?v=1791971072","url":"https:\/\/terrainvault.com\/products\/icon-stage-1-suspension-system-for-1991-97-toyota-land-cruiser-80-seri","provider":"TerrainVault","version":"1.0","type":"link"}