{"product_id":"icon-2021-2026-ford-f-150-raptor-stage-1-coil-spring-suspension-system","title":"ICON 2021-2026 Ford F-150 Raptor Stage 1 Coil Spring Suspension System","description":"\u003cp class=\"product-lead\"\u003eThe ICON Vehicle Dynamics Stage 1 Suspension System is a bolt-on coil spring upgrade for 2021–2026 Ford F-150 Raptor and Raptor R trucks running OE coilovers, delivering 2.25 inches of front lift on the standard Raptor and 2 inches on the Raptor R, paired with 1 inch of rear lift on trucks without added rear weight. The kit includes a front spring kit (95232) and a triple-rate rear coil spring kit (95230), both engineered specifically for the Gen3 platform.\u003c\/p\u003e\n\u003cp class=\"product-shipping-note\"\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e ICON parts ship direct from ICON Vehicle Dynamics, mostly by UPS Ground. Lead times vary by part and some items are built to order, so please allow extra time. We email tracking as soon as your order ships.\u003c\/p\u003e\n\n\u003ch2\u003eLinear Front Rate for Predictable Handling\u003c\/h2\u003e\n\u003cp\u003eThe front coil springs use a linear spring rate, which means spring resistance increases at a consistent, predictable ratio throughout the stroke. For a Raptor driver, that translates to steering feel and body control that stays consistent whether navigating a highway on-ramp or a high-speed desert wash: no sudden stiffening mid-corner and no vague, unpredictable transitions. The springs are designed to maintain full compatibility with all available OE electronic shock absorbers, so the factory adaptive damping system continues to function as intended after installation.\u003c\/p\u003e\n\n\u003ch2\u003eTriple-Rate Rear Springs for All-Conditions Performance\u003c\/h2\u003e\n\u003cp\u003eThe rear coil springs use three distinct spring rates engineered by ICON: an extra-soft initial rate for maximum droop travel and articulation, a performance ride rate that balances compliance and comfort under normal load, and an overload rate that resists bottom-out when the truck is loaded or working hard off-road. A tapered wire design in the rear coils allows the spring to achieve maximum travel and efficiency within the factory envelope. The result is a rear suspension that handles an unladen trail run and a loaded camp haul without requiring a spring swap between uses.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Build with Long-Term Corrosion Protection\u003c\/h2\u003e\n\u003cp\u003eBoth the front and rear springs install without cutting or permanent modification to the factory suspension. A dual-stage powder coating protects the spring wire against corrosion across a range of environments, from coastal salt air to muddy trail conditions. ICON backs these springs with a lifetime guarantee against sagging or breakage.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront lift:\u003c\/strong\u003e 2.25 inches over stock on F-150 Raptor; 2 inches over stock on Raptor R\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRear lift:\u003c\/strong\u003e 1 inch over stock on Raptors without additional rear weight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLinear front coil springs:\u003c\/strong\u003e consistent rate for predictable handling with OE electronic shocks\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTriple-rate rear coil springs:\u003c\/strong\u003e ICON-engineered droop, ride, and overload rates with tapered wire design\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-stage powder coating:\u003c\/strong\u003e corrosion resistance for on- and off-road environments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e no cutting or modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford F-150 Raptor and Raptor R (Gen3)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront lift (Raptor)\u003c\/td\u003e\n      \u003ctd\u003e2.25 inches over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront lift (Raptor R)\u003c\/td\u003e\n      \u003ctd\u003e2 inches over stock\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear lift\u003c\/td\u003e\n      \u003ctd\u003e1 inch over stock (without additional rear weight)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront spring rate\u003c\/td\u003e\n      \u003ctd\u003eLinear\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear spring rate\u003c\/td\u003e\n      \u003ctd\u003eTriple-rate (droop, ride, overload)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRear coil design\u003c\/td\u003e\n      \u003ctd\u003eTapered wire\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eDual-stage powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eComponents included\u003c\/td\u003e\n      \u003ctd\u003eFront spring kit (95232), triple-rate rear coil spring kit (95230)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping weight\u003c\/td\u003e\n      \u003ctd\u003e104 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eK93171\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit suits 2021–2026 Ford F-150 Raptor and Raptor R owners who want a moderate front and rear lift using their factory OE coilovers, with no cutting or permanent modification. It is a strong fit for trucks running OEM wheels and tires or the recommended 35x12.50 (without 37 Package) or 37x12.50 (with 37 Package) aftermarket tire sizes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis system fits only trucks equipped with OE (factory) coilovers; it will not fit trucks running ICON or other aftermarket coilovers. It cannot be combined with coil spacers. Advertised lift heights apply to a stock-weight vehicle; adding accessories or cargo weight will alter the actual lift achieved. ADAS recalibration is required after installation. Larger tires than those listed above may fit but will require fender trimming and modifications not included in this kit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this kit work with my aftermarket coilovers?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ICON Stage 1 Suspension System is designed exclusively for trucks running OE (factory) coilovers. It will not fit ICON or other aftermarket coilovers. Owners who have already upgraded to aftermarket coilovers should look at a different ICON system matched to their existing hardware.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require cutting or drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo cutting or drilling is required. The front and rear coil springs in this Stage 1 kit are bolt-on replacements designed to install in the factory suspension locations without permanent modification to the truck.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the factory electronic shock controls still work after installing these springs?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The front coil springs in this kit are designed to maintain full compatibility with all available OE electronic shock absorbers, so the factory adaptive damping system continues to operate normally. ADAS recalibration is required after installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much lift does this system provide on a Raptor R versus a standard Raptor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOn a standard F-150 Raptor, the front springs deliver 2.25 inches of lift over stock. On the Raptor R, the same front springs deliver 2 inches of lift over stock. Both variants receive 1 inch of rear lift, assuming no additional weight is added to the rear of the truck.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I run coil spacers alongside this kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. Combining this Stage 1 coil spring system with coil spacers is explicitly not supported and may cause damage. The kit is engineered to deliver its stated lift heights as a standalone spring replacement without supplemental spacers.\u003c\/p\u003e","brand":"ICON Vehicle Dynamics","offers":[{"title":"Default Title","offer_id":50628287692870,"sku":"K93171","price":1035.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/71bb13f646be2ade7f21c00c5477b682-sq.jpg?v=1791944346","url":"https:\/\/terrainvault.com\/products\/icon-2021-2026-ford-f-150-raptor-stage-1-coil-spring-suspension-system","provider":"TerrainVault","version":"1.0","type":"link"}