{"product_id":"flatline-van-co-sprinter-van-side-steps","title":"Flatline Van Co Sprinter Van Side Steps","description":"\u003cp class=\"product-lead\"\u003eThe Flatline Van Co Sprinter Van Side Steps are bolt-on running boards built for 2007+ Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans on 144-inch, 170-inch, and 170-inch Extended wheelbases across Low and High Roof configurations, with a dedicated variant for the Winnebago Revel. Constructed from a combination of 2-inch by 2-inch square steel tube and 1.75-inch round steel tube, finished in powder-coated steel, the steps mount high and tight to the body for a clean profile without sacrificing step surface area. Three fitment variants are available: Sprinter 144-inch, Sprinter 170-inch, and Winnebago Revel.\u003c\/p\u003e\n\n\u003ch2\u003eTraction Where It Counts\u003c\/h2\u003e\n\u003cp\u003eBoth the driver-side and passenger-side steps feature dimpled tread plates built directly into the step hoops. The dimple pattern creates mechanical grip underfoot rather than relying on adhesive tape or bolt-on grating that can loosen over time. On a stock Sprinter the added step height alone reduces the reach required to enter the cab; on a lifted or 4x4 build, where the sill sits noticeably higher, that reduction in reach translates directly into less strain on knees and hips every time you get in or out.\u003c\/p\u003e\n\n\u003ch2\u003eAsymmetric Design Built Around Real-World Use\u003c\/h2\u003e\n\u003cp\u003eThe driver-side step runs 33.5 inches long and is intentionally cut short of the rear wheel arch. That gap is a deliberate clearance zone. A Flatline Van Co Apex, Wheel Wrap, or Standard Side Ladder mounts there without any modification to the steps or the ladder. The passenger-side step runs 53.5 inches long, providing a wider boarding surface on the side that typically sees more frequent use for loading gear and passengers. The passenger step is also designed to pair with the Flatline Van Co Step Extension, which is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eDIY-Friendly Bolt-On Installation\u003c\/h2\u003e\n\u003cp\u003eThe Sprinter Van Side Steps use a mount bracket system and arrive with all hardware required for installation, so no sourcing of additional fasteners is needed. On Sprinter variants, the brackets attach to existing body structure. On the Winnebago Revel variant, the steps mount directly to the Revel's factory mount brackets, eliminating the need to drill new holes in the body. Installation guides are available for each variant (144-inch, 170-inch, and Revel) and the bolt-on design is intended to be completed without professional fabrication equipment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimpled tread plates:\u003c\/strong\u003e integrated into step hoops on both driver and passenger sides for mechanical grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty tube construction:\u003c\/strong\u003e 2\" x 2\" square steel tube combined with 1.75\" round steel tube, powder-coated finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAsymmetric step lengths:\u003c\/strong\u003e 33.5\" driver side (ladder-clearance cutout) and 53.5\" passenger side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide ladder compatible:\u003c\/strong\u003e works with Flatline Van Co Apex, Wheel Wrap, and Standard Side Ladders without modification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAll mounting hardware included:\u003c\/strong\u003e bracket system and fasteners in the box; Revel variant mounts to existing factory brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eSprinter 144\"\u003c\/th\u003e\n      \u003cth\u003eSprinter 170\"\u003c\/th\u003e\n      \u003cth\u003eWinnebago Revel\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eSP1114B\u003c\/td\u003e\n      \u003ctd\u003eSP1119B\u003c\/td\u003e\n      \u003ctd\u003eSP1120B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2007+ Mercedes-Benz Sprinter 1500\/2500\/3500\/3500XD | 144\" WB | Low\/High Roof\u003c\/td\u003e\n      \u003ctd\u003e2007+ Mercedes-Benz Sprinter 1500\/2500\/3500\/3500XD | 170\" \/ 170\" EXT WB | Low\/High Roof\u003c\/td\u003e\n      \u003ctd\u003eWinnebago Revel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDriver-Side Step Length\u003c\/td\u003e\n      \u003ctd\u003e33.5\"\u003c\/td\u003e\n      \u003ctd\u003e33.5\"\u003c\/td\u003e\n      \u003ctd\u003e33.5\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePassenger-Side Step Length\u003c\/td\u003e\n      \u003ctd\u003e53.5\"\u003c\/td\u003e\n      \u003ctd\u003e53.5\"\u003c\/td\u003e\n      \u003ctd\u003e53.5\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTube Construction\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003e2\" × 2\" square steel tube + 1.75\" round steel tube\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003ePowder-coated steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e160 lb\u003c\/td\u003e\n      \u003ctd\u003e160 lb\u003c\/td\u003e\n      \u003ctd\u003e160 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware Included\u003c\/td\u003e\n      \u003ctd colspan=\"3\"\u003eYes, all mounting hardware included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRevel Mount Method\u003c\/td\u003e\n      \u003ctd\u003e\u003c\/td\u003e\n      \u003ctd\u003e\u003c\/td\u003e\n      \u003ctd\u003eDirect mount to existing Revel factory brackets\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including Carbon Black and Titanium Dioxide, which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flatline Van Co Sprinter Van Side Steps suit owners of 2007 and newer Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans on 144-inch or 170-inch wheelbases (including 170-inch Extended), in Low or High Roof configuration, as well as Winnebago Revel owners who want a high-clearance, ladder-compatible running board that installs without fabrication. They are particularly well-suited to lifted or 4x4 Sprinter builds where the factory sill height makes entry difficult.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese steps are not compatible with the Mercedes-Benz E-Sprinter. Sprinter passenger vans equipped with rear heat or air conditioning may require modifications before installation. Buyers with that configuration should confirm fitment before ordering. The Flatline Van Co Step Extension referenced for the passenger side is a separate product and is not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Sprinter model years and body configurations are compatible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Sprinter Van Side Steps fit 2007 and newer Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans on 144-inch, 170-inch, and 170-inch Extended wheelbases in both Low and High Roof configurations. A dedicated variant is also available for the Winnebago Revel. The steps are not compatible with the E-Sprinter.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill these side steps work on a lifted or 4x4 Sprinter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Sprinter Van Side Steps are designed to provide easy access to both stock and lifted Sprinter vans. The step height and tube construction are intended to handle the additional sill height that comes with a suspension lift or 4x4 conversion, making entry and exit easier regardless of ride height.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these steps compatible with Flatline Van Co side ladders?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Sprinter Van Side Steps are compatible with the Flatline Van Co Apex Ladder, Wheel Wrap Side Ladder, and Standard Side Ladder without any modifications to either the steps or the ladder. The driver-side step is intentionally cut short of the rear wheel arch to preserve the clearance needed for ladder mounting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat comes in the box, and is any additional hardware required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAll mounting hardware required for installation is included with the Sprinter Van Side Steps. On the Winnebago Revel variant, the steps mount directly to the Revel's existing factory brackets. The Flatline Van Co Step Extension, which pairs with the passenger-side step, is a separate product and is not included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow involved is the installation, and are professional tools required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Sprinter Van Side Steps use a bolt-on mount bracket system designed for DIY installation. Separate installation guides are available for the 144-inch, 170-inch, and Winnebago Revel variants. No professional fabrication equipment is required for standard Sprinter fitments; however, Sprinter passenger vans with rear heat or air conditioning may require additional modifications.\u003c\/p\u003e","brand":"Flatline Van Co","offers":[{"title":"Sprinter 144\"","offer_id":50629823430726,"sku":"SP1114B","price":1645.99,"currency_code":"USD","in_stock":true},{"title":"Sprinter 170\"","offer_id":50629823463494,"sku":"SP1119B","price":1845.99,"currency_code":"USD","in_stock":true},{"title":"Winnebago Revel","offer_id":50629823496262,"sku":"SP1120B","price":1645.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/SP1114B-144-sprinter-side-steps-sq.jpg?v=1791951704","url":"https:\/\/terrainvault.com\/products\/flatline-van-co-sprinter-van-side-steps","provider":"TerrainVault","version":"1.0","type":"link"}