{"product_id":"flatline-van-co-rear-bumper-for-ford-transit","title":"Flatline Van Co Rear Bumper for Ford Transit","description":"\u003cp class=\"product-lead\"\u003eThe Flatline Van Co Transit Van Rear Bumper replaces the factory plastic bumper on 2020+ Ford Transit 150\/250\/350 vans (130\", 148\", and 148\" EXT wheelbases, Mid and High Roof) with a low-profile aluminum-and-steel unit that retains all factory parking and blind spot monitoring sensors, integrates recovery points, and accepts Baja Designs S2 SAE or S2 Sport LED light pods. The 2023–2024 Transit Trail in 148\" and 148\" EXT wheelbases (Mid and High Roof) is also supported.\u003c\/p\u003e\n\n\u003ch2\u003eSensor Compatibility Without Compromise\u003c\/h2\u003e\n\u003cp\u003eReplacing a factory bumper on a modern Transit risks disabling the parking sensors and blind spot monitoring system that drivers rely on daily. The Transit Van Rear Bumper addresses this directly: ABS parking sensor bezels are included for a snap-in transfer of factory sensors and wiring, and the blind spot monitoring sensors are built into the bumper structure itself. The result is a full aftermarket replacement that keeps every OEM safety and driver-assist feature operational.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Design That Works With the Van\u003c\/h2\u003e\n\u003cp\u003eThe bumper's profile follows the Transit's body lines rather than adding bulk, which preserves the van's departure angle and ground clearance, a consideration when loading at a curb, navigating a steep driveway, or exiting a trail. The rear doors open and function normally with the bumper installed. The integrated non-slip dimpled surface provides grip when stepping up to access roof gear in wet, muddy, or icy conditions, and the surface drains freely rather than pooling water.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Structure, Aluminum Skin, UV-Rated Finish\u003c\/h2\u003e\n\u003cp\u003eA full steel substructure and 5mm stainless steel mounting brackets form the load-bearing core, while a 3mm aluminum skin keeps overall weight to 81 lbs. Grade 8 zinc yellow-chromate hardware is included for the mount. The UV-rated black powder coat finish is formulated to resist fading over time, unlike the factory plastic bumper it replaces. Integrated recovery points accept 3\/4\" D-rings with a 7\/8\" pin. Installation requires minor cutting into the factory plastic bumper and can be completed with basic hand tools.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor retention:\u003c\/strong\u003e ABS parking sensor bezels included; blind spot monitoring sensors built in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated recovery points:\u003c\/strong\u003e tow hooks sized for 3\/4\" D-rings with 7\/8\" pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLighting provisions:\u003c\/strong\u003e cutouts sized for Baja Designs S2 SAE or S2 Sport LED light pods; cover plates included for running without lighting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in wiring channel:\u003c\/strong\u003e clean routing for lighting or accessory wiring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHitch compatible:\u003c\/strong\u003e works with or without factory hitch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e Grade 8 zinc yellow-chromate mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eConstruction\u003c\/td\u003e\n      \u003ctd\u003eSteel substructure, 3mm aluminum skin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBracket material\u003c\/td\u003e\n      \u003ctd\u003e5mm stainless steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eUV-rated black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e81 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring compatibility\u003c\/td\u003e\n      \u003ctd\u003e3\/4\" D-rings with 7\/8\" pin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting hardware\u003c\/td\u003e\n      \u003ctd\u003eGrade 8 zinc yellow-chromate (included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLighting cutouts\u003c\/td\u003e\n      \u003ctd\u003eBaja Designs S2 SAE or S2 Sport LED light pods (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e2020+ Ford Transit 150\/250\/350, 130\"\/148\"\/148\" EXT wheelbase, Mid and High Roof; 2023–2024 Ford Transit Trail, 148\"\/148\" EXT wheelbase, Mid and High Roof\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eTR1113B\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Transit Van Rear Bumper suits 2020–present Ford Transit 150, 250, and 350 owners (Mid and High Roof, 130\", 148\", and 148\" EXT wheelbases) and 2023–2024 Transit Trail owners who want a low-profile steel-and-aluminum replacement that retains all factory sensors, adds integrated recovery points, and accepts auxiliary lighting, whether the van is used for overlanding, extended travel, or daily work.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit Ford Transit vans built before 2020, Low Roof Transit variants, or any non-Transit van platform. Baja Designs S2 SAE and S2 Sport LED light pods are not included and must be purchased separately. The installation requires minor cutting of the factory plastic bumper.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper work with my Transit's factory parking sensors and blind spot monitoring?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Transit Van Rear Bumper is designed to retain all factory sensors. ABS parking sensor bezels are included for a snap-in transfer of the factory sensors and wiring, and the blind spot monitoring sensors are integrated directly into the bumper structure, so both systems remain fully functional after installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat tools and modifications are needed to install this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling the Transit Van Rear Bumper requires minor cutting into the factory plastic bumper. Beyond that, the installation can be completed with basic hand tools. Grade 8 zinc yellow-chromate mounting hardware is included. An installation guide is available from Flatline Van Co.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper work if my Transit has a factory hitch?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Transit Van Rear Bumper fits vans with or without a factory hitch. No modification to the hitch is required for the bumper to fit and function correctly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting can I add to this bumper, and are lights included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bumper has cutouts sized for Baja Designs S2 SAE or S2 Sport LED light pods, along with a built-in wiring channel for clean routing. Light pods are not included and are sold separately. Cover plates are included so the bumper can be run without lighting installed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat are the recovery point specs on this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Transit Van Rear Bumper includes integrated recovery points sized for 3\/4\" D-rings with a 7\/8\" pin. D-rings are not included and must be sourced separately.\u003c\/p\u003e\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Flatline Van Co","offers":[{"title":"Default Title","offer_id":50621749395526,"sku":"TR1113B","price":1995.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/TR1113B-transit-van-rear-bumper-sq.jpg?v=1791938430","url":"https:\/\/terrainvault.com\/products\/flatline-van-co-rear-bumper-for-ford-transit","provider":"TerrainVault","version":"1.0","type":"link"}