{"product_id":"flatline-van-co-nudge-bar-for-mercedes-benz-sprinter-and-winnebago-rev","title":"Flatline Van Co Nudge Bar for Mercedes-Benz Sprinter and Winnebago Revel","description":"\u003cp class=\"product-lead\"\u003eThe Flatline Van Co Sprinter Nudge Bar is a bolt-on front-end upgrade for 2007+ Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans and 2020+ Winnebago Revel camper vans. Built from 1.5-inch aluminum tube and finished in powder-coat black, it adds 41 inches of usable tubing for mounting lights or a light bar, relocates the license plate, and installs without drilling in under 15 minutes. Fitment covers all wheelbase configurations (144-inch, 170-inch, and 170-inch Extended) and both Low and High Roof variants.\u003c\/p\u003e\n\n\u003ch2\u003eA Ready-Made Lighting Platform\u003c\/h2\u003e\n\u003cp\u003eThe nudge bar provides 41 inches of flat 1.5-inch round aluminum tubing across the front of the van, enough to run a full-width LED light bar or a row of individual pods up to 6 inches in diameter. Having a dedicated, structurally sound mount point means lights stay aimed where they were set and do not shift on rough roads the way improvised bracket solutions can. All mounting hardware is included, so there is no separate trip to a hardware store before the install.\u003c\/p\u003e\n\n\u003ch2\u003eDesigned Around Mercedes-Benz Safety Systems\u003c\/h2\u003e\n\u003cp\u003eThe Sprinter Nudge Bar was developed in accordance with the Mercedes-Benz Master Upfitter guidelines for the VS30 Sprinter platform. The bar is positioned so it should not affect the operation of the Active Distance Assist DISTRONIC system or the radar sensor housed in the factory bumper. Buyers who rely on those driver-assistance features can add the nudge bar without disabling them. Note that the bar will be visible in the Sprinter's front camera view.\u003c\/p\u003e\n\n\u003ch2\u003eNo-Drill Installation in Under 15 Minutes\u003c\/h2\u003e\n\u003cp\u003eThe nudge bar mounts to the existing Sprinter front bumper without drilling into the van body. Every piece of hardware needed for the install is included in the box. The license plate relocates to the nudge bar as part of the same process, so there is no separate bracket to source. Most owners complete the full installation in under 15 minutes.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e41-inch lighting platform:\u003c\/strong\u003e 1.5-inch round aluminum tubing supports lights up to 6 inches in diameter or a full-width LED light bar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLicense plate relocation:\u003c\/strong\u003e integrated mount moves the plate to the nudge bar during installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNo-drill fitment:\u003c\/strong\u003e bolts to the factory bumper using included hardware; no cutting or drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaster Upfitter compliant:\u003c\/strong\u003e designed per Mercedes-Benz VS30 upfitter guidelines; should not affect DISTRONIC or radar sensor function\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePowder-coat black finish:\u003c\/strong\u003e 1.5-inch aluminum tube construction with a durable black powder-coat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront camera note:\u003c\/strong\u003e nudge bar is visible in the Sprinter's front camera view\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eAluminum tube\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTube diameter\u003c\/td\u003e\n      \u003ctd\u003e1.5 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBar width\u003c\/td\u003e\n      \u003ctd\u003e41 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003ePowder-coat black\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e25 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMax light diameter supported\u003c\/td\u003e\n      \u003ctd\u003e6 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware included\u003c\/td\u003e\n      \u003ctd\u003eYes, all mounting hardware included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eSP1106B\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e2007+ Mercedes-Benz Sprinter 1500\/2500\/3500\/3500XD | 144\"\/170\"\/170\" EXT | Low\/High Roof; 2020+ Winnebago Revel\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flatline Van Co Sprinter Nudge Bar suits owners of 2007 and newer Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans across all wheelbase and roof-height configurations, and 2020 and newer Winnebago Revel camper vans, who want a front-end lighting mount and a cleaner license plate position without modifying the factory bumper.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe nudge bar does not fit Ford Transit, Ram ProMaster, or any vehicle outside the stated Sprinter and Revel fitment. It is not a full bumper replacement and does not add structural collision protection. Buyers should be aware the bar will appear in the Sprinter's front camera view.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Sprinter model years and configurations does this nudge bar fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flatline Van Co Sprinter Nudge Bar fits 2007 and newer Mercedes-Benz Sprinter 1500, 2500, 3500, and 3500XD vans in all wheelbase configurations (144-inch, 170-inch, and 170-inch Extended) and in both Low Roof and High Roof variants. It also fits the 2020 and newer Winnebago Revel.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing the nudge bar require drilling into the van?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo drilling is required. The Sprinter Nudge Bar bolts to the existing factory bumper using the hardware included in the box. The full installation, including license plate relocation, typically takes under 15 minutes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size lights can be mounted on the nudge bar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe nudge bar's 1.5-inch round aluminum tubing can support individual round lights up to 6 inches in diameter. The 41-inch span across the front of the van also accommodates a full-width LED light bar.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the nudge bar interfere with the Sprinter's DISTRONIC or radar sensor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Sprinter Nudge Bar was designed in accordance with Mercedes-Benz Master Upfitter guidelines for the VS30 platform and should not affect the operation of the Active Distance Assist DISTRONIC system or the radar sensor in the factory bumper. Buyers who rely on those driver-assistance features can install the nudge bar without disabling them.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill the nudge bar show up in the Sprinter's front camera view?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The nudge bar will be visible in the Sprinter's front camera view. This is a known characteristic of the design and is noted by Flatline Van Co in their product documentation.\u003c\/p\u003e","brand":"Flatline Van Co","offers":[{"title":"Default Title","offer_id":50629907775558,"sku":"SP1106B","price":995.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/sprinter-nudge-bar-sq.jpg?v=1791952514","url":"https:\/\/terrainvault.com\/products\/flatline-van-co-nudge-bar-for-mercedes-benz-sprinter-and-winnebago-rev","provider":"TerrainVault","version":"1.0","type":"link"}