{"product_id":"dv8-offroad-tube-front-bumper-for-ford-bronco-raptor","title":"DV8 Offroad Tube Front Bumper for Ford Bronco Raptor","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Tube Front Bumper (FBFR-02) is a bolt-on steel front bumper built exclusively for the 2022–2026 Ford Bronco Raptor, combining a high-clearance prerunner tube design with an integrated vented skid plate and 5\/8-inch solid steel recovery hooks. The bumper is finished in micro-texture black powder coat with gray speckled steel accent panels and an orange \"R\" accent plate that matches the Raptor's factory styling. It fits the 2022, 2023, 2024, 2025, and 2026 model years of the Bronco Raptor only.\u003c\/p\u003e\n\n\u003ch2\u003eHigh Clearance Where It Counts\u003c\/h2\u003e\n\u003cp\u003eThe tube front bumper's ultra-high-clearance design sits as close to internal components as possible, maximizing the gap between the bumper and the ground. That geometry matters on technical terrain: a bumper that hangs low catches ledges and boulders before the tires do, breaking momentum and risking damage. The Bronco Raptor's approach angle stays usable on rock shelves and steep entry points because the tube structure removes the wide, low face of a traditional full-replacement bumper.\u003c\/p\u003e\n\u003cp\u003eThe integrated vented skid plate adds underside protection without blocking airflow. Large openings in the skid allow the Raptor's engine to breathe at both high and low speeds. That matters during sustained high-speed desert running, when engine temps climb.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Built Into the Structure\u003c\/h2\u003e\n\u003cp\u003eThe center section of the bumper accepts either a 20-inch dual-row LED light bar plus a pair of 3-inch pod lights, or six 3-inch pod lights on their own. Each wing carries a single 3-inch pod light mount. The included optional push bar adds a second tier of lighting real estate: it accommodates a 20-inch light bar (single or dual row), four 7-inch round lights, or eight 3-inch pods. Welded zip-tie tabs are built into the bumper for clean, routed wiring rather than zip ties strapped to whatever is nearby. Lights are not included.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery and OEM Functionality Retained\u003c\/h2\u003e\n\u003cp\u003eThe 5\/8-inch solid steel recovery hooks bolt directly to the frame, keeping front recovery capability intact after the bumper swap. The bumper is designed to retain the Bronco Raptor's factory parking sensors without modification. Adaptive cruise control (ACC) is retained with the addition of the ABBR-01 ACC Relocation Bracket, which is sold separately. No cutting is required; installation is fully bolt-on and estimated at four hours.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-clearance tube design:\u003c\/strong\u003e ultra-high-clearance profile engineered to prevent hang-ups on rocks and ledges\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated vented skid plate:\u003c\/strong\u003e full front skid with large openings for engine airflow and trail protection\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5\/8-inch solid steel recovery hooks:\u003c\/strong\u003e bolt directly to the frame; included with the bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtensive light mounting:\u003c\/strong\u003e center mount for 20-inch dual-row bar plus two 3-inch pods (or six 3-inch pods); one 3-inch pod mount per wing; push bar adds additional bar, round, and pod mount options\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFactory sensor retention:\u003c\/strong\u003e retains OEM parking sensors; ACC retained with ABBR-01 bracket (sold separately)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-texture black powder coat:\u003c\/strong\u003e with gray speckled steel accent panels and orange \"R\" accent plate; CNC-machined logo end caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eFBFR-02\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2022–2026 Ford Bronco Raptor only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e2mm, 3mm, 3.5mm, and 5mm steel plate and tube\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat; gray speckled steel accent panels; orange \"R\" accent plate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e106 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecovery hooks\u003c\/td\u003e\n      \u003ctd\u003e5\/8-inch solid steel; bolt to frame; included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCenter light mount\u003c\/td\u003e\n      \u003ctd\u003e20-inch dual-row bar + two 3-inch pods, or six 3-inch pods\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWing light mounts\u003c\/td\u003e\n      \u003ctd\u003eOne 3-inch pod mount per side\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePush bar light mounts\u003c\/td\u003e\n      \u003ctd\u003e20-inch bar (single or dual row), four 7-inch round lights, or eight 3-inch pods\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eBolt-on, no cutting required; estimated 4 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory parking sensors\u003c\/td\u003e\n      \u003ctd\u003eRetained\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdaptive cruise control\u003c\/td\u003e\n      \u003ctd\u003eRetained with ABBR-01 bracket (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory fog lights\u003c\/td\u003e\n      \u003ctd\u003eNot retained; bumper replaces factory fog light location\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory skid plate\u003c\/td\u003e\n      \u003ctd\u003eNot retained; bumper replaces factory skid plate\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n      \u003ctd\u003eBumper, integrated skid plate, 5\/8-inch recovery hooks, optional push bar\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2022–2026 Ford Bronco Raptor owners who run technical rock terrain or high-speed desert trails and want a high-clearance front end with integrated skid protection, solid recovery points, and a platform for substantial auxiliary lighting. Installation is fully bolt-on and retains factory parking sensors.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any standard Ford Bronco (non-Raptor) trim or any other vehicle. It does not retain the factory fog lights or the factory skid plate. Adaptive cruise control requires the separately purchased ABBR-01 ACC Relocation Bracket. Installing the included push bar will partially obstruct the factory front camera; a camera relocation bracket is sold separately to address this. Lights are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit the standard Ford Bronco, or only the Bronco Raptor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 FBFR-02 tube front bumper fits only the 2022–2026 Ford Bronco Raptor. It is not compatible with any standard (non-Raptor) Ford Bronco trim. The Raptor's wider body and unique front-end structure require a bumper designed specifically for that variant.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper retain the factory parking sensors and adaptive cruise control?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 FBFR-02 tube front bumper retains the Bronco Raptor's factory parking sensors without modification. Adaptive cruise control (ACC) is also retained, but requires the ABBR-01 ACC Relocation Bracket, which is sold separately. Without that bracket, ACC will not function after installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights can be mounted on this bumper, and are any included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 FBFR-02 tube front bumper's center mount accepts a 20-inch dual-row LED light bar plus two 3-inch pod lights, or six 3-inch pods on their own. Each wing has one 3-inch pod mount. The included optional push bar adds mounts for a 20-inch bar (single or dual row), four 7-inch round lights, or eight 3-inch pods. No lights are included with the bumper.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing the push bar block the factory front camera?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The optional push bar included with the DV8 FBFR-02 tube front bumper will partially obstruct the Bronco Raptor's factory front camera if installed. A camera relocation bracket is sold separately and resolves the obstruction by repositioning the camera for a clear view. The push bar is optional. The bumper functions fully without it.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this a bolt-on installation, and what tools or modifications are required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 FBFR-02 tube front bumper is a fully bolt-on installation with no cutting required. Installation is estimated at four hours, though time will vary depending on experience. Retaining adaptive cruise control requires the separately purchased ABBR-01 ACC Relocation Bracket. An install guide is available from DV8 Offroad.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50621702471750,"sku":"FBFR-02","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Bronco-Raptor-Tube-Front-Bumper-Render-sq.jpg?v=1791936903","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-tube-front-bumper-for-ford-bronco-raptor","provider":"TerrainVault","version":"1.0","type":"link"}