{"product_id":"dv8-offroad-tube-front-bumper-for-2014-2021-toyota-tundra","title":"DV8 Offroad Tube Front Bumper for 2014-2021 Toyota Tundra","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Tube Front Bumper is a bolt-on steel front bumper for 2014–2021 Toyota Tundra (all trims), built from 3.5mm and 5mm steel with an ultra-high-clearance tube design that keeps the front end free of obstacles on desert runs and rock terrain. The center section mounts a 20-inch dual-row light bar or up to six 3-inch pod lights; each wing adds one 3-inch pod. An optional prerunner-style push bar expands lighting capacity further and reinforces the front end. The bumper ships at 106 lb and installs without cutting in an estimated 4.5 hours.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Clear Terrain\u003c\/h2\u003e\n\u003cp\u003eThe tube-style construction raises the front profile well above where a conventional bumper would sit, so the Tundra can roll over rocks and through ruts without the bumper catching on the obstacle first. That clearance is not cosmetic. On a trail where a stock or low-profile bumper would hang up and stop forward progress, the high tube profile keeps the truck moving. The speckled gray accent skid plates cover the lower section, shielding the front end from rocks, sand, and debris that reach below the tubes.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Flexibility Without Rewiring the Truck\u003c\/h2\u003e\n\u003cp\u003eThe DV8 Offroad Tube Front Bumper is designed around multiple lighting configurations so a Tundra owner can build the setup that matches how they drive. The center section accepts a 20-inch dual-row light bar or up to six 3-inch pod lights; each wing independently mounts one additional 3-inch pod. The optional push bar opens a third tier of options: a 20-inch single or dual light bar, four 7-inch round lights, or eight 3-inch pod lights. Welded zip-tie tabs are built into the bumper for clean wire routing, so adding lights does not mean loose wiring across the engine bay.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Install, Factory Features Intact\u003c\/h2\u003e\n\u003cp\u003eThe bumper mounts directly to the factory attachment points with no cutting required, in an estimated 4.5 hours. The factory parking sensors carry over without modification, and the factory recovery points are retained so existing recovery gear and tow straps still attach where they always did. Adaptive Cruise Control remains functional with this bumper installed. The micro-texture black powder coat finish covers the steel; the accent panels use a speckled steel gray.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltra-high-clearance tube design:\u003c\/strong\u003e prevents hang-ups on rocks and obstacles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter lighting mount:\u003c\/strong\u003e accepts a 20-inch dual-row light bar or up to six 3-inch pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWing lighting mounts:\u003c\/strong\u003e one 3-inch pod per side (two total)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeckled gray accent skid plates:\u003c\/strong\u003e full lower protection against rocks, sand, and debris\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWelded zip-tie tabs:\u003c\/strong\u003e clean wire routing built into the bumper structure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains factory parking sensors and recovery points:\u003c\/strong\u003e no modification required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-texture black powder coat finish:\u003c\/strong\u003e bolt-on installation, no cutting required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eFBTT2-07\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2014–2021 Toyota Tundra, All Trims\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Material\u003c\/td\u003e\n      \u003ctd\u003e3.5mm and 5mm Steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-Texture Black Powder Coat; Speckled Steel Gray Accent Panels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e106 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eBolt-on, no cutting required; estimated 4.5 hours\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory Parking Sensors\u003c\/td\u003e\n      \u003ctd\u003eRetained\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory Recovery Points\u003c\/td\u003e\n      \u003ctd\u003eRetained\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdaptive Cruise Control\u003c\/td\u003e\n      \u003ctd\u003eCompatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFront Camera (with optional push bar)\u003c\/td\u003e\n      \u003ctd\u003ePartially obstructed\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory Skid Plate \/ Fog Lights\u003c\/td\u003e\n      \u003ctd\u003eNot compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2014–2021 Toyota Tundra owners (all trims) who run desert terrain, rock trails, or a mix of both and want a high-clearance front end with room to build out a serious lighting setup. The retained factory sensors and bolt-on installation make it a practical upgrade for daily-driven trucks that also see trail use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe factory skid plate and factory fog lights are not compatible with this bumper and will not fit once it is installed. When the optional push bar is installed, it partially obstructs the front camera view. This bumper fits only the 2014–2021 Toyota Tundra; it does not fit any other make, model, or generation.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit all trim levels of the 2014–2021 Toyota Tundra?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Tube Front Bumper (FBTT2-07) is confirmed to fit all trim levels of the 2014–2021 Toyota Tundra. It does not fit any other Toyota model, any earlier or later Tundra generation, or any other make or model.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting can I mount on this bumper without the optional push bar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWithout the push bar, the center section of the DV8 Offroad Tube Front Bumper accepts a 20-inch dual-row light bar or up to six 3-inch pod lights. Each wing independently mounts one 3-inch pod light, for two additional pods total.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting does the optional push bar add?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWith the optional prerunner-style push bar installed, the DV8 Offroad Tube Front Bumper gains capacity for a 20-inch single or dual light bar, four 7-inch round lights, or eight 3-inch pod lights on the push bar structure. Note that the push bar partially obstructs the front camera view when installed.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill my factory parking sensors and Adaptive Cruise Control still work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The DV8 Offroad Tube Front Bumper retains factory parking sensor functionality and is compatible with Adaptive Cruise Control. No sensor modification is required during the bolt-on installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the push bar come in the box, or is it sold separately?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe product listing describes the push bar as both \"optional\" and \"included,\" which is contradictory. Confirm with TerrainVault before ordering whether the push bar ships in the box with this bumper or is a separate purchase.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does installation take, and is cutting required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Tube Front Bumper installs with a bolt-on process that requires no cutting. The estimated installation time is 4.5 hours, though actual time will vary depending on experience and shop setup.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50621745135686,"sku":"FBTT2-07","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2nd-gen-Tundra-Tube-Front-Bumper-1-sq.jpg?v=1791938294","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-tube-front-bumper-for-2014-2021-toyota-tundra","provider":"TerrainVault","version":"1.0","type":"link"}