{"product_id":"dv8-offroad-spec-series-roof-rack-for-2024-2026-toyota-tacoma-double-c","title":"DV8 Offroad Spec Series Roof Rack for 2024-2026 Toyota Tacoma Double Cab","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Spec Series Roof Rack is a fully bolt-on aluminum roof rack built for the 2024-2026 Toyota Tacoma Double Cab, featuring six 80\/20 T-slot cross bars, integrated rock light and backup light mounting slots, and removable rear fins for flush rooftop tent or awning installation. Steel mounting feet anchor the rack to the Tacoma's roof, and exterior-facing sidewall bolts allow the entire assembly to be built and loaded at ground level before being lifted into place. This rack fits Double Cab models only.\u003c\/p\u003e\n\n\u003ch2\u003eUltra Low-Profile Design with Active Wind Management\u003c\/h2\u003e\n\u003cp\u003eThe Spec Series rack sits close to the Tacoma's roofline, keeping the visual profile clean and reducing the aerodynamic penalty that taller racks impose. The angular front wind deflector redirects airflow over the rack, cutting wind noise and drag at highway speeds. For overlanders who spend long stretches on pavement between trail sections, that reduction in road noise and fuel impact is a practical daily benefit, not just a styling choice.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Integration Built Into the Structure\u003c\/h2\u003e\n\u003cp\u003eRock light side slot mounts run the full length of both sidewalls, so trail and campsite lighting can be positioned anywhere along the rack without drilling or add-on brackets. Rear slot mounts accept backup lights for low-visibility reversing, and the rear cross bar is sized to accept a 40-inch light bar directly. An optional front light mount (sold separately, SKU not included) supports two 20-inch single-row light bars, one 40-inch single-row light bar, or ten 3-inch pod lights, giving the rack a complete front-to-rear lighting architecture when fully configured.\u003c\/p\u003e\n\n\u003ch2\u003eGround-Level Assembly for a Manageable Install\u003c\/h2\u003e\n\u003cp\u003eMounting a loaded roof rack typically means working overhead with hardware that's hard to reach. The Spec Series rack moves that work to the ground: the steel mounting feet install on the Tacoma's roof first, then the rack is assembled and loaded at ground level before being lifted onto the feet and secured with exterior-facing bolts on the sidewall edges. DV8 Offroad estimates the full installation at approximately five hours (2.5 hours assembly, 2.5 hours install), though time will vary by experience level. The 90-degree bent sidewalls add structural rigidity to the finished assembly, resisting flex under gear weight and trail vibration.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSix 80\/20 T-Slot Cross Bars:\u003c\/strong\u003e M6 T-nut slots along every bar for securing gear, storage boxes, and accessories without drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable Rear Fins:\u003c\/strong\u003e fins detach to allow flush mounting of rooftop tents, awnings, and other large accessories\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull-Length Rock Light Slots:\u003c\/strong\u003e side slot mounts run the entire rack length; rear slots accept backup lights; rear cross bar accepts a 40-inch light bar\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel Mounting Feet with Exterior-Facing Bolts:\u003c\/strong\u003e feet pre-install on the roof; rack bolts secure from outside the sidewalls for ground-level assembly\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5mm Aluminum Side Plates:\u003c\/strong\u003e lightweight construction finished in micro-texture black powder coat with gloss black steel accent panels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully Bolt-On Installation:\u003c\/strong\u003e no cutting or welding; compatible with Double Cab models only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eRRTT1-04\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2024-2026 Toyota Tacoma, Double Cab only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide Plate Material\u003c\/td\u003e\n      \u003ctd\u003e5mm aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Feet Material\u003c\/td\u003e\n      \u003ctd\u003e5mm steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat; gloss black steel accent panels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCross Bars\u003c\/td\u003e\n      \u003ctd\u003eSix 80\/20 T-slot bars; M6 T-nut compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e59 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on; estimated 5 hours (2.5 assembly + 2.5 install)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatibility Notes\u003c\/td\u003e\n      \u003ctd\u003eWill not fit XtraCab models. Sunroof models require one fewer cross bar to clear tilt position.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis rack suits 2024-2026 Toyota Tacoma Double Cab owners who need a low-profile platform for rooftop tents, storage boxes, recovery gear, or a full lighting setup, and who want a bolt-on installation that can be assembled at ground level before mounting.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis rack does not fit Tacoma XtraCab models. Tacoma models equipped with a sunroof must run one fewer cross bar to clear the sunroof in its tilt position. The optional front light mount is sold separately and is not included. No load capacity figure is published for this rack; consult the Tacoma owner's manual for the vehicle's roof mounting point weight limits before loading.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this rack fit the Tacoma XtraCab or any other cab configuration?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Spec Series Roof Rack (RRTT1-04) fits only the 2024-2026 Toyota Tacoma Double Cab. It is not compatible with XtraCab models or any prior Tacoma generation. Buyers should confirm their cab style before ordering.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eMy Tacoma has a sunroof. Will this rack still work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Spec Series Roof Rack is compatible with sunroof-equipped 2024-2026 Tacoma Double Cab models, but those trucks must run one fewer cross bar than the standard six to allow the sunroof to open to its tilt position. The remaining five bars still provide full T-slot mounting coverage across the rack.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat lighting can I run with this rack, and is the front light mount included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Spec Series Roof Rack includes integrated side slot mounts for rock lights along its full length, rear slot mounts for backup lights, and a rear cross bar sized for a 40-inch light bar. The optional front light mount, which supports two 20-inch single-row light bars, one 40-inch single-row light bar, or ten 3-inch pod lights, is sold separately and is not included with this rack.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does installation take, and what is the process?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eDV8 Offroad estimates approximately five hours for the full installation: 2.5 hours to assemble the rack and 2.5 hours to mount it to the vehicle, though time will vary by experience. The steel mounting feet install on the Tacoma's roof first; the rack is then assembled and loaded at ground level before being lifted onto the feet and secured with exterior-facing bolts along the sidewall edges. No cutting or welding is required.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the weight capacity of this roof rack?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eDV8 Offroad does not publish a standalone load rating for the Spec Series Roof Rack. The limiting factor is the Tacoma's own roof mounting point capacity; consult the vehicle owner's manual for that figure before loading the rack with a rooftop tent or heavy gear. Adding weight above the roofline also raises the vehicle's center of gravity, which affects handling.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50621805887558,"sku":"RRTT1-04","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4th-Gen-Tacoma-Double-Cab-Roof-Rack-3-sq.jpg?v=1791939800","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-spec-series-roof-rack-for-2024-2026-toyota-tacoma-double-c","provider":"TerrainVault","version":"1.0","type":"link"}