{"product_id":"dv8-offroad-spec-series-front-bumper-for-ford-f-150","title":"DV8 Offroad Spec Series Front Bumper for Ford F-150","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Spec Series Front Bumper is a full-width steel replacement front bumper for 2021–2023 Ford F-150 trucks (all trim levels with 5.0L, 2.7L, or 3.5L engines, including Powerboost; not compatible with the Raptor). It integrates a heavy-duty winch mount, a pair of 1-inch-thick D-ring mounts, mounts for a 20-inch light bar and four 3-inch pod lights, and ships with a full front skid plate included. Construction is 3.5mm and 5mm steel with a micro-texture black powder coat finish and satin powder-coated accent panels.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt-In Recovery Capability\u003c\/h2\u003e\n\u003cp\u003eThe Spec Series bumper carries a hidden heavy-duty winch mount sized for winches up to 21.5 inches long, 6.7 inches wide, and 10.7 inches tall, covering most mid-range and full-size recovery winches without requiring a separate mounting plate. The pair of 1-inch-thick D-ring mounts accept 7\/8-inch pins, giving a dedicated, purpose-built anchor point for a shackle or recovery strap rather than relying on improvised attachment points. Having both a winch mount and D-ring mounts on the same bumper means the F-150 can serve as either the recovery vehicle or the vehicle being recovered without additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Mounts for the Trail\u003c\/h2\u003e\n\u003cp\u003eThe center of the Spec Series bumper accepts one 20-inch single-row or dual-row light bar, and the wing sections carry four 3-inch pod light mounts (two per side) for a total of five independent lighting positions. Running all five simultaneously gives broad forward illumination across the full width of the truck's path. The bumper's full-width design improves approach angle compared to the factory bumper, so the added lighting reaches farther down the trail rather than being partially blocked by a lower front fascia.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Cutting Required\u003c\/h2\u003e\n\u003cp\u003eThe Spec Series bumper is fully bolt-on and requires no cutting or modification to the F-150's frame or body. Welded-in zip tie tabs are built into the bumper structure, so wiring for lights or a winch routes cleanly without aftermarket cable management hardware. The OEM parking sensors and front camera carry over without modification. Estimated installation time is 3.5 hours, though actual time varies with experience. Adaptive cruise control is retained when the ABFF-01 ACC Relocation Bracket is installed (sold separately).\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch mount:\u003c\/strong\u003e integrated heavy-duty mount, compatible with winches up to 21.5\" L × 6.7\" W × 10.7\" H (does not fit Badlands Apex or Warn Zeon)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eD-ring mounts:\u003c\/strong\u003e pair of 1-inch-thick mounts for 7\/8-inch pins, included\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight mounts:\u003c\/strong\u003e one 20-inch center mount (single or dual row) and four 3-inch pod light mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded skid plate:\u003c\/strong\u003e full front skid plate ships with the bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM compatibility:\u003c\/strong\u003e retains factory parking sensors and front camera; fog lights not retained\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e micro-texture black powder coat with satin powder-coated Spec Series accent panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eFBFF1-11\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3.5mm and 5mm steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat; satin powder coat (accent panels)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e112 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch tray dimensions\u003c\/td\u003e\n      \u003ctd\u003e21.5\" L × 6.7\" W × 10.7\" H\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring mount thickness\u003c\/td\u003e\n      \u003ctd\u003e1 inch (for 7\/8\" pins)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2023 Ford F-150, all trim levels; 5.0L, 2.7L, and 3.5L engines (including Powerboost). Not compatible with Raptor.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory fog lights\u003c\/td\u003e\n      \u003ctd\u003eNot retained\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFactory skid plate\u003c\/td\u003e\n      \u003ctd\u003eNot compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAdaptive cruise control\u003c\/td\u003e\n      \u003ctd\u003eRetained with ABFF-01 ACC Relocation Bracket (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on; no cutting or modification required. Estimated 3.5 hours.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eProp 65 Warning:\u003c\/strong\u003e WARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Spec Series Front Bumper suits 2021–2023 Ford F-150 owners who wheel off-road and want a single bumper that handles recovery rigging, auxiliary lighting, and a winch without sourcing separate mounting hardware. It works across all standard trim levels and all three available engine displacements, including the Powerboost hybrid.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit the F-150 Raptor. It does not retain the factory fog lights, and it is not compatible with the factory skid plate. Adaptive cruise control requires the ABFF-01 ACC Relocation Bracket, sold separately. The winch mount does not accommodate the Badlands Apex or Warn Zeon winch.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit the F-150 Raptor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Spec Series Front Bumper does not fit the Ford F-150 Raptor. It is designed for 2021–2023 F-150 trucks in all other trim levels with 5.0L, 2.7L, or 3.5L engines, including the Powerboost hybrid variant.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill my adaptive cruise control still work after installing this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAdaptive cruise control can be retained on the 2021–2023 F-150 after installing the Spec Series bumper, but it requires the DV8 Offroad ABFF-01 ACC Relocation Bracket, which is sold separately. Without that bracket, the ACC sensor cannot be properly positioned and the system will not function.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat winches are compatible with the integrated mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Spec Series bumper's winch mount accepts winches with a body no larger than 21.5 inches long, 6.7 inches wide, and 10.7 inches tall. The Badlands Apex and Warn Zeon winches are specifically not compatible with this mount.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the bumper come with a skid plate, and does it work with the factory skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA full front skid plate is included with the Spec Series Front Bumper. The bumper is not compatible with the factory F-150 skid plate, so the included skid plate replaces it rather than supplementing it.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow difficult is installation, and does it require any cutting or drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Spec Series Front Bumper is fully bolt-on and requires no cutting, drilling, or permanent modification to the F-150. Estimated installation time is approximately 3.5 hours, though actual time will vary based on the installer's experience level.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50623804276806,"sku":"FBFF1-11","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2021-2023-F-150-Spec-Series-Front-Bumper-Offtruck-01-sq.jpg?v=1791942055","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-spec-series-front-bumper-for-ford-f-150","provider":"TerrainVault","version":"1.0","type":"link"}