{"product_id":"dv8-offroad-rear-belly-skid-plate-for-tacoma-4runner-and-land-cruiser","title":"DV8 Offroad Rear Belly Skid Plate for Tacoma, 4Runner and Land Cruiser","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Rear Belly Skid Plate is a 3.5mm steel undercarriage guard for the 2024–2026 Toyota Tacoma, 2024–2026 Toyota Land Cruiser, and 2025–2026 Toyota 4Runner, designed to shield the engine oil pan from rocks, roots, and trail debris. The plate bolts directly to factory mounting points with no drilling required and installs in an estimated 1.5 hours. A removable access panel means routine oil changes do not require pulling the entire skid.\u003c\/p\u003e\n\n\u003ch2\u003eTrail-Ready Protection Without Compromising Maintenance\u003c\/h2\u003e\n\u003cp\u003eA punctured or cracked oil pan can end a trail run and cause lasting engine damage. The DV8 Offroad Rear Belly Skid Plate places 3.5mm steel between the oil pan and whatever the trail throws underneath the truck, absorbing impacts that would otherwise reach a vulnerable cast component. The removable panel built into the skid plate means that protecting the oil pan does not add time or frustration to a routine oil change. The drain plug stays accessible without unbolting the whole plate.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Fitment, No Fabrication Required\u003c\/h2\u003e\n\u003cp\u003eThe skid plate uses the factory mounting points already present on the Tacoma, Land Cruiser, and 4Runner frames, so installation does not require drilling, welding, or custom brackets. DV8 Offroad estimates the install at approximately 1.5 hours. The plate is also designed to work alongside both DV8 front skid plates and the factory front skid plate, so adding rear belly protection does not require replacing or modifying existing undercarriage coverage.\u003c\/p\u003e\n\n\u003ch2\u003eFinish Built for the Undercarriage Environment\u003c\/h2\u003e\n\u003cp\u003eThe skid plate is finished in a micro-texture black powder coat formulated to match the factory undercarriage appearance. Powder coat provides a harder, more impact-resistant surface than paint, which matters on a component that contacts rocks and debris directly. The texture also helps resist the scraping and chipping that a smooth finish would show after repeated trail use.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEngine and oil pan protection:\u003c\/strong\u003e 3.5mm steel plate shields the bottom of the engine and oil pan from rocks, roots, and trail obstacles\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable access panel:\u003c\/strong\u003e built-in panel lifts out for oil drain plug access without removing the full skid plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFront skid compatibility:\u003c\/strong\u003e designed to work with both DV8 and factory front skid plates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully bolt-on installation:\u003c\/strong\u003e mounts to factory points with no drilling, cutting, or custom fabrication\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-texture black powder coat:\u003c\/strong\u003e durable finish matched to the factory undercarriage appearance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3.5mm steel construction:\u003c\/strong\u003e heavy-duty gauge chosen for impact resistance in off-road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eSPTT1-09\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3.5mm steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eDirect bolt-on to factory mounting points; no drilling required; estimated 1.5-hour install\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Toyota Tacoma (fitment unconfirmed for Trailhunter and TRD Pro trims); 2024–2026 Toyota Land Cruiser, all trims; 2025–2026 Toyota 4Runner (fitment unconfirmed for Trailhunter and TRD Pro trims)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe DV8 Offroad Rear Belly Skid Plate suits owners of 2024–2026 Toyota Tacoma, 2024–2026 Toyota Land Cruiser (all trims), and 2025–2026 Toyota 4Runner who take their vehicles off-road on rocky or root-crossed terrain and want bolt-on undercarriage protection that does not complicate routine oil changes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eFitment is not confirmed for Trailhunter or TRD Pro trims of the Tacoma or 4Runner. This skid plate does not fit any vehicle outside the stated Toyota makes, model generations, and model years listed above.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Toyota models and years does this skid plate fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Rear Belly Skid Plate (SPTT1-09) fits the 2024–2026 Toyota Tacoma (Trailhunter and TRD Pro trims unconfirmed), the 2024–2026 Toyota Land Cruiser in all trims, and the 2025–2026 Toyota 4Runner (Trailhunter and TRD Pro trims unconfirmed).\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing this skid plate require drilling or cutting?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo drilling or cutting is required. The DV8 Offroad Rear Belly Skid Plate bolts directly to the factory mounting points already present on the Tacoma, Land Cruiser, and 4Runner frames. DV8 Offroad estimates the installation at approximately 1.5 hours, though actual time will vary with experience level.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I change my oil without removing the entire skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The DV8 Offroad Rear Belly Skid Plate includes a removable access panel positioned over the oil drain plug. Removing that panel provides access for a routine oil change without unbolting the full skid plate from the vehicle.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this skid plate work with my existing front skid plate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Rear Belly Skid Plate is designed to be compatible with both DV8 front skid plates and the factory Toyota front skid plate, so adding this rear belly protection does not require removing or replacing existing front undercarriage coverage.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the skid plate made from, and how is it finished?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Rear Belly Skid Plate is constructed from 3.5mm steel and finished in a micro-texture black powder coat. The powder coat is formulated to match the appearance of the factory undercarriage and provides a harder, more chip-resistant surface than paint for a component that contacts rocks and debris directly.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50622638030918,"sku":"SPTT1-09","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2024-Toyota-Tacoma-_-Land-Cruiser-Rear-Belly-Skid-Plate-2-sq.jpg?v=1791941496","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-rear-belly-skid-plate-for-tacoma-4runner-and-land-cruiser","provider":"TerrainVault","version":"1.0","type":"link"}