{"product_id":"dv8-offroad-crash-bar-caps-with-accessory-mount-for-ford-bronco","title":"DV8 Offroad Crash Bar Caps with Accessory Mount for Ford Bronco","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Crash Bar Caps cover the open ends of the factory crash bar left exposed after installing an aftermarket front bumper on a 2021-2026 Ford Bronco. Constructed from 3mm steel with a micro-texture black powder coat finish, each cap includes an integrated accessory mount sized for light pods, rock lights, or an action camera. These fit all Bronco trims from 2021 through 2026, excluding the Raptor, and accommodate up to 35-inch tires with the Sasquatch package or an equivalent aftermarket lift.\u003c\/p\u003e\n\n\u003ch2\u003eA Finished Look After Your Bumper Swap\u003c\/h2\u003e\n\u003cp\u003eMost aftermarket front bumpers leave the crash bar's tube ends open, a visible gap that looks unfinished and can collect trail debris. The DV8 Offroad Crash Bar Caps cover those ends cleanly, giving the front end a complete, intentional appearance without cutting or fabricating anything. The micro-texture black powder coat matches the matte finish common on off-road bumpers, so the caps blend rather than stand out.\u003c\/p\u003e\n\n\u003ch2\u003eA Mounting Point You Would Otherwise Have to Fabricate\u003c\/h2\u003e\n\u003cp\u003eEach crash bar cap includes an integrated accessory mount that accepts light pods up to 3 inches, rock lights, RGB accent lights, or an action camera such as a GoPro. That position, low and forward on the crash bar, puts a camera at an angle suited for rock crawling footage and puts auxiliary lighting where it can illuminate obstacles directly in front of the bumper. Note that light pods, rock lights, and wiring harnesses are sold separately; minor wiring is required to use the lighting mount.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation in About 30 Minutes\u003c\/h2\u003e\n\u003cp\u003eThe crash bar caps use a direct-fit, bolt-on design that utilizes factory hardware already on the crash bar, so no drilling or cutting is required for the caps themselves. DV8 Offroad estimates installation at approximately 30 minutes, though time will vary depending on experience. Minor wiring is needed if you plan to use the accessory mount for lighting.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitment:\u003c\/strong\u003e 2021-2026 Ford Bronco, all trims excluding Raptor; accommodates up to 35-inch tires with Sasquatch package or equivalent aftermarket lift\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated accessory mount:\u003c\/strong\u003e accepts light pods up to 3 inches, rock lights, RGB accent lights, or an action camera\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3mm steel construction:\u003c\/strong\u003e micro-texture black powder coat finish\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e direct fit using factory hardware; estimated 30-minute install\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinor wiring required:\u003c\/strong\u003e when using the accessory mount for lighting (lights and harness sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2021-2026 Ford Bronco, all trims excluding Raptor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTire clearance\u003c\/td\u003e\n      \u003ctd\u003eUp to 35 inches with Sasquatch package or equivalent aftermarket lift\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3mm steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e~4 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware\u003c\/td\u003e\n      \u003ctd\u003eUtilizes factory hardware\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eLBBR-07\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese crash bar caps suit 2021-2026 Ford Bronco owners (all trims except Raptor) who have installed or are planning to install an aftermarket front bumper and want to cover the exposed crash bar ends cleanly while gaining a forward-facing mount for auxiliary lighting or an action camera.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese caps do not fit the Ford Bronco Raptor. They are not compatible with stock Bronco bumpers that leave the crash bar enclosed. Light pods, rock lights, RGB lights, wiring harnesses, and action cameras are not included and must be purchased separately. Minor wiring is required to power any lighting connected to the accessory mount.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ford Bronco years and trims do these crash bar caps fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Crash Bar Caps (LBBR-07) fit 2021 through 2026 Ford Broncos across all trims, with one exception: they do not fit the Ford Bronco Raptor. They are designed for Broncos running up to 35-inch tires with the Sasquatch package or an equivalent aftermarket lift.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo lights or a wiring harness come included with these caps?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo lights, rock lights, or wiring harness are included with the DV8 Offroad Crash Bar Caps. The caps provide the accessory mount; light pods, RGB lights, and wiring harnesses must be purchased separately. Minor wiring is required to connect any lighting to the accessory mount.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat accessories can I mount on the crash bar caps?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe integrated accessory mount on each DV8 Offroad Crash Bar Cap accepts light pods up to 3 inches in diameter, rock lights, RGB accent lights, and action cameras such as a GoPro. The forward-low position on the crash bar makes it well suited for capturing rock crawling footage or illuminating obstacles directly in front of the bumper.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these caps require drilling or cutting to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Crash Bar Caps use a direct-fit, bolt-on design that utilizes factory hardware already on the crash bar, so no drilling or cutting is required for the caps themselves. Installation is estimated at approximately 30 minutes, though time will vary by experience level. Minor wiring is needed if you plan to use the accessory mount for lighting.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50629662474310,"sku":"LBBR-07","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-gen-ford-bronco-crash-bar-caps_53556325-9c5e-43f8-9321-c-sq.jpg?v=1791950687","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-crash-bar-caps-with-accessory-mount-for-ford-bronco","provider":"TerrainVault","version":"1.0","type":"link"}