{"product_id":"dv8-offroad-center-console-molle-panels-and-bridge-for-ford-bronco","title":"DV8 Offroad Center Console MOLLE Panels and Bridge for Ford Bronco","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad Center Console MOLLE Panels and Bridge is a direct-fit interior storage kit for the 2021–2026 Ford Bronco that adds driver- and passenger-side MOLLE fields to the center console alongside a removable device bridge, without giving up the cup holders or the passenger-side grab handle. The kit fits every trim from Base to Raptor with both manual and automatic transmissions.\u003c\/p\u003e\n\n\u003ch2\u003eOrganized Storage at Arm's Reach\u003c\/h2\u003e\n\u003cp\u003eBoth side panels accept standard MOLLE pouches, clip mounts, holsters, multi-tool sheaths, and other MOLLE-compatible accessories, keeping frequently used gear within reach rather than buried in a bag or door pocket. The panels mount directly to the existing center console structure, preserving the console's original function while adding usable storage surface on both sides.\u003c\/p\u003e\n\n\u003ch2\u003eA Bridge Built for Digital Devices\u003c\/h2\u003e\n\u003cp\u003eThe center bridge holds five M5 x 0.8 PEM nuts spaced to the AMPS standard (1.9 inches \/ 48.5 mm apart), making it directly compatible with RAM Diamond Base Mounts, Bulletpoint Mounting Solutions, and Quad Lock Systems\/Base Plates. A phone, GPS unit, radio, or tablet mounts at a stable, central position rather than on a windshield or dash corner. The bridge detaches independently when not needed; the side panels stay in place with no partial disassembly required.\u003c\/p\u003e\n\n\u003ch2\u003eFinish and Installation\u003c\/h2\u003e\n\u003cp\u003eAll panels and the bridge carry a micro-texture black powder-coat finish. Installation is estimated at approximately 90 minutes and requires no permanent modifications; all hardware needed to mount the kit to the vehicle is included. Hardware to attach accessories to the MOLLE panels is not included and is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver and passenger MOLLE panels:\u003c\/strong\u003e both sides included, compatible with MOLLE pouches and clip mounts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRemovable device bridge:\u003c\/strong\u003e detaches independently while side panels remain mounted\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFive M5 x 0.8 PEM nuts:\u003c\/strong\u003e AMPS-standard 1.9-inch \/ 48.5 mm spacing; compatible with RAM Diamond Base, Bulletpoint, and Quad Lock mounts\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMicro-texture black powder-coat finish\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRetains cup holders and passenger grab handle:\u003c\/strong\u003e no loss of factory console function\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVehicle-mount hardware included:\u003c\/strong\u003e accessory-mount hardware sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eCCBR-01\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford Bronco, all trims (Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition, Raptor), manual and automatic transmissions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFit type\u003c\/td\u003e\n      \u003ctd\u003eDirect fit\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e~11 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eDimensions (panels and bridge)\u003c\/td\u003e\n      \u003ctd\u003e24 in length x 7 in width x 17 in height\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePEM nut thread\u003c\/td\u003e\n      \u003ctd\u003eM5 x 0.8 (5 nuts)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAMPS hole spacing\u003c\/td\u003e\n      \u003ctd\u003e1.9 in \/ 48.5 mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEstimated install time\u003c\/td\u003e\n      \u003ctd\u003e~90 minutes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware included\u003c\/td\u003e\n      \u003ctd\u003eVehicle-mount hardware; accessory-mount hardware sold separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis kit suits 2021–2026 Ford Bronco owners, across all trims and both transmission types, who want organized within-reach storage for MOLLE gear and a stable central mount for a phone, GPS, or radio without modifying the console or losing cup-holder access.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe kit does not fit any vehicle other than the 2021–2026 Ford Bronco. It does not include hardware to mount accessories or pouches to the MOLLE panels; that hardware is sold separately. Buyers who need a pre-populated pouch kit or a specific device mount will need to source those items independently.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP and bisphenol A (BPA) which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ford Bronco model years and trims does this fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad Center Console MOLLE Panels and Bridge fits all 2021–2026 Ford Bronco trims, including Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition, and Raptor, with both manual and automatic transmissions. It does not fit any other vehicle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the kit include hardware to attach pouches or accessories to the MOLLE panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The kit includes all hardware required to mount the panels and bridge to the Bronco's center console. Hardware to attach accessories or pouches to the MOLLE panels themselves is not included; a mounting hardware pack is sold separately and can be added at checkout.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich device mount systems are compatible with the bridge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe bridge's five M5 x 0.8 PEM nuts are spaced to the AMPS standard (1.9 inches \/ 48.5 mm) and are confirmed compatible with RAM Diamond Base Mounts, Bulletpoint Mounting Solutions, and Quad Lock Systems\/Base Plates. Other brands that follow the AMPS pattern may also work, though only those three are explicitly confirmed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the bridge be removed without taking off the side panels?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The center bridge on the DV8 Offroad console kit is independently removable. The driver- and passenger-side MOLLE panels remain fully mounted when the bridge is detached, so there is no need to disassemble the entire kit to clear the console top.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this block the cup holders or the passenger grab handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The DV8 Offroad Center Console MOLLE Panels and Bridge is designed to retain full use of both cup holders and the passenger-side grab handle. Neither is obstructed by the panels or the bridge in the installed position.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow long does installation take?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstallation of the DV8 Offroad Center Console MOLLE Panels and Bridge is estimated at approximately 90 minutes, though actual time will vary depending on experience level. An installation guide is available from DV8 Offroad for reference.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50629657657414,"sku":"CCBR-01","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6th-gen-bronco-center-console-molle-panels_eeab4e04-7999-4fd-sq.jpg?v=1791950388","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-center-console-molle-panels-and-bridge-for-ford-bronco","provider":"TerrainVault","version":"1.0","type":"link"}