{"product_id":"dv8-offroad-40-inch-curved-light-bar-mount-for-ford-bronco","title":"DV8 Offroad 40-Inch Curved Light Bar Mount for Ford Bronco","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad LBBR-03 is an over-windshield mounting bracket that positions a 40-inch curved LED light bar directly above the windshield of a 2021–2026 Ford Bronco, or accepts up to twelve 3-inch pod lights in the same position. The bracket is 44 inches wide, built from 3\/4-inch diameter tube steel and 4mm plate steel, and finished in a micro-texture black powder coat. It fits all Bronco trims for those model years, including the Bronco Raptor.\u003c\/p\u003e\n\n\u003ch2\u003eNo-Drill, No-Modification Installation\u003c\/h2\u003e\n\u003cp\u003eThe LBBR-03 mounts directly to the factory accessory points located above the Bronco windshield, with no drilling, cutting, or permanent modification to the vehicle required. Because the bracket uses existing OEM hardware locations, installation time is approximately 60 minutes and the vehicle returns to stock condition if the bracket is removed. Mounting brackets for the light bar are included in the box, along with all necessary hardware.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Lighting Configurations from One Bracket\u003c\/h2\u003e\n\u003cp\u003eThe bracket accepts a single 40-inch curved LED light bar across its full 44-inch span, or the same curved profile accommodates twelve individual 3-inch pod lights using a series of pre-drilled mounting holes. A Bronco owner can run a continuous light bar for wide flood coverage or switch to individually aimed pods, and the same bracket handles both configurations without requiring a different mount. Lights are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eSteel Construction with a Durable Powder Coat Finish\u003c\/h2\u003e\n\u003cp\u003eThe bracket combines 3\/4-inch diameter tube steel with 4mm thick plate steel for structural rigidity under the vibration and stress of off-road driving. The micro-texture black powder coat finish protects the steel from abrasion and corrosion. At approximately 15 pounds, the bracket adds meaningful mass above the windshield, which is worth accounting for when selecting a light bar or pod lights to pair with it.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual lighting compatibility:\u003c\/strong\u003e accepts a 40-inch curved LED light bar or up to twelve 3-inch pod lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e44-inch width:\u003c\/strong\u003e spans the full over-windshield accessory zone on the 6th-generation Bronco\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e 3\/4-inch diameter tube steel combined with 4mm plate steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMicro-texture black powder coat:\u003c\/strong\u003e factory-style finish applied over bare steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM mount points:\u003c\/strong\u003e bolts to factory accessory locations above the windshield, no drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e mounting brackets for light bars and all fasteners included in the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eLBBR-03\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford Bronco: Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition, Raptor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/4-inch diameter tube steel and 4mm plate steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWidth\u003c\/td\u003e\n      \u003ctd\u003e44 inches\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e~15 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Location\u003c\/td\u003e\n      \u003ctd\u003eOverhead, above windshield\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting Method\u003c\/td\u003e\n      \u003ctd\u003eDirect fit to OEM accessory mounts, no drilling or modification required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware\u003c\/td\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLights\u003c\/td\u003e\n      \u003ctd\u003eNot included, sold separately\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bracket suits 2021–2026 Ford Bronco owners, including Bronco Raptor, running a hard top or modular top who want to add a 40-inch curved LED light bar or up to twelve 3-inch pod lights above the windshield using the factory accessory mount points.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eOver-windshield light bar mounts are not recommended for soft-top-equipped Broncos due to wind noise. Lights are not included with this bracket and must be purchased separately. This bracket does not fit any vehicle other than the 2021–2026 Ford Bronco.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING (California Proposition 65):\u003c\/strong\u003e This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bracket fit the Ford Bronco Raptor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad LBBR-03 light bar mount fits all 2021–2026 Ford Bronco trims, including the Bronco Raptor. It mounts to the factory accessory points above the windshield, which are present across all sixth-generation Bronco variants.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre lights included with this mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo lights are included with the LBBR-03 bracket. The mount is designed to accept a 40-inch curved LED light bar or up to twelve 3-inch pod lights, both of which are sold separately. Mounting brackets for the light bar and all installation hardware are included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling or cutting?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo drilling or cutting is required. The LBBR-03 mounts directly to the OEM accessory points located above the Bronco windshield, using the factory hardware locations. Estimated installation time is approximately 60 minutes, though time may vary depending on experience.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this mount work on a soft-top Bronco?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOver-windshield light bar mounts, including the LBBR-03, are not recommended for soft-top-equipped Broncos. Mounting a light bar or pod lights in this position on a soft-top vehicle can generate significant wind noise while driving.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size light bar does this bracket accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe LBBR-03 is designed specifically for a 40-inch curved LED light bar. The bracket is 44 inches wide and curved to match the over-windshield profile of the 2021–2026 Ford Bronco. It also accepts up to twelve 3-inch pod lights as an alternative configuration.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50629753667654,"sku":"LBBR-03","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/bronco-light-bar-bracket-sq.jpg?v=1791951518","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-40-inch-curved-light-bar-mount-for-ford-bronco","provider":"TerrainVault","version":"1.0","type":"link"}