{"product_id":"dv8-offroad-2024-2026-tacoma-d-ring-recovery-mounts-pair","title":"DV8 Offroad 2024-2026 Tacoma D-Ring Recovery Mounts, Pair","description":"\u003cp class=\"product-lead\"\u003eThe DV8 Offroad D-Ring Recovery Mounts add a pair of dedicated rear recovery points to the factory rear bumper of 2024–2026 Toyota Tacoma trucks, giving you pull options beyond the hitch without altering the bumper's stock appearance. Each mount is built from 5mm steel with a 1-inch thick D-ring slot that accepts standard 3\/4-inch D-rings with a 7\/8-inch shackle pin, and the pair bolts directly to the frame and hitch crossmember at three attachment points per side. Minor drilling is required for installation.\u003c\/p\u003e\n\n\u003ch2\u003eRecovery Points That Keep the Factory Look\u003c\/h2\u003e\n\u003cp\u003eAdding dedicated D-ring mounts to the rear bumper means a recovery strap or snatch block can be rigged quickly at a fixed, frame-connected point rather than relying solely on the hitch receiver. The low-profile design sits close to the bumper face, so the Tacoma's rear end retains its OEM proportions. No aftermarket bumper swap is required. For trail situations where a quick directional pull is needed, having two anchored recovery points gives a recovery crew more rigging options than a single center hitch.\u003c\/p\u003e\n\n\u003ch2\u003eThree-Point Mounting for a Rigid Connection\u003c\/h2\u003e\n\u003cp\u003eEach mount secures at three attachment points and ties into the bumper's frame and hitch crossmember, distributing load across the truck's structure rather than concentrating it at a single fastener. The 5mm steel construction and micro-texture black powder coat finish are designed to handle trail exposure. The textured coat resists chips and surface rust better than a smooth finish in the same conditions. Note that for severe recovery operations, the hitch receiver remains the recommended anchor point.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDedicated recovery points:\u003c\/strong\u003e adds two rear D-ring anchor locations outside the hitch receiver\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-profile fitment:\u003c\/strong\u003e mounts flush to the factory bumper face, preserving OEM styling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1-inch thick D-ring slot:\u003c\/strong\u003e accepts standard 3\/4-inch D-rings with a 7\/8-inch shackle pin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree-point installation:\u003c\/strong\u003e each mount bolts to the frame and hitch crossmember at three attachment points\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e5mm steel with powder coat:\u003c\/strong\u003e micro-texture black powder coat finish over heavy-duty steel construction\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e includes both driver-side and passenger-side mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2024–2026 Toyota Tacoma\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCompatible bumpers\u003c\/td\u003e\n      \u003ctd\u003eOEM factory rear bumper (non-ARB); DV8 RBTT1-08\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e5mm steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring mount thickness\u003c\/td\u003e\n      \u003ctd\u003e1 inch\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring size accepted\u003c\/td\u003e\n      \u003ctd\u003e3\/4-inch D-ring with 7\/8-inch shackle pin\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAttachment points per mount\u003c\/td\u003e\n      \u003ctd\u003e3\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMicro-texture black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eMinor drilling required; estimated 1.5-hour install\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eQuantity\u003c\/td\u003e\n      \u003ctd\u003eSold as a pair\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eSPTT1-10\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including lead and lead compounds, DEHP, and bisphenol A (BPA), which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese mounts suit 2024–2026 Toyota Tacoma owners who want dedicated rear D-ring recovery points on their factory rear bumper or DV8 RBTT1-08 bumper without replacing the bumper itself. They are a practical addition for overlanders and off-road drivers who want more rigging options than a single hitch receiver provides on the trail.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese mounts do not fit 2024–2026 Tacoma TRD Pro or Trail Hunter models equipped with the OEM ARB Rear Bumper. They are not intended as the sole anchor for severe recovery operations. The hitch receiver is the recommended point for high-load pulls. D-rings are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these mounts work with the factory Tacoma rear bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DV8 Offroad D-Ring Recovery Mounts are designed to bolt onto the 2024–2026 Tacoma's OEM factory rear bumper (non-ARB version) and the DV8 RBTT1-08 bumper. They are not compatible with the OEM ARB Rear Bumper found on TRD Pro and Trail Hunter trims.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs any cutting or welding required to install these mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstallation of the D-Ring Recovery Mounts requires minor drilling but no cutting or welding. The estimated install time is 1.5 hours, though actual time will vary depending on experience and tools on hand.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size D-rings fit these mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach D-Ring Recovery Mount has a 1-inch thick mounting slot sized for standard 3\/4-inch D-rings with a 7\/8-inch shackle pin. D-rings are not included with the mounts and must be sourced separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan these mounts handle a full vehicle recovery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe D-Ring Recovery Mounts are designed for trail recovery pulls and provide two additional anchor points beyond the hitch receiver. For severe recovery operations involving high loads, the hitch receiver remains the recommended primary anchor point.\u003c\/p\u003e","brand":"DV8 Offroad","offers":[{"title":"Default Title","offer_id":50638105706566,"sku":"SPTT1-10","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2024-2025-Toyota-Tacoma-D-Ring-Recovery-Mounts-1-sq.jpg?v=1792013274","url":"https:\/\/terrainvault.com\/products\/dv8-offroad-2024-2026-tacoma-d-ring-recovery-mounts-pair","provider":"TerrainVault","version":"1.0","type":"link"}