{"product_id":"c4-fabrication-tundra-hybrid-front-bumper-wide-fenders-2014-2021","title":"C4 Fabrication Tundra Hybrid Front Bumper Wide Fenders 2014–2021","description":"\u003cp class=\"product-lead\"\u003eThe C4 Fabrication Hybrid Front Bumper is a steel-and-tube front replacement bumper for the 2014–2021 Toyota Tundra (2nd Gen) built with fiberglass wide fenders. A 3\/16\" laser-cut P\u0026amp;O steel center section provides a rigid winch-mounting platform rated for 8K–12K lb winches, while .120-wall 1-3\/4\" HREW tube sides reduce weight and open up multiple lighting configurations. This listing covers the wide-fender fitment only; a separate listing exists for standard-width Tundra fenders.\u003c\/p\u003e\n\n\u003ch2\u003eHybrid Construction Puts Steel Where It Counts\u003c\/h2\u003e\n\u003cp\u003eThe Hybrid Bumper's center section is fabricated from 3\/16\" laser-cut P\u0026amp;O steel, backed by 3\/8\" mounting plates and a 1\/4\" winch plate. That concentration of material at the winch mount and frame attachment points means the structure handles recovery loads without flex, while the tubular outer wings keep overall weight lower than an all-plate design. The 3\/4\" D-ring tabs are fully welded front and back on every bumper, so recovery anchor points are ready without additional hardware.\u003c\/p\u003e\n\n\u003ch2\u003eImproved Approach Angle and Larger Tire Clearance\u003c\/h2\u003e\n\u003cp\u003eThe Hybrid Bumper's geometry is designed to improve approach angles compared to the factory bumper, which directly affects how the truck handles steep entry onto trails and rock faces. The additional clearance also makes it easier to run larger tires without rubbing at full steering lock, a practical gain for Tundra owners who have already lifted or plan to lift their truck.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Ready Out of the Box\u003c\/h2\u003e\n\u003cp\u003eThe bumper is designed to accept a 30\" single-row light bar. Confirmed fitment includes the Baja Designs S8, Rigid SR Series, and Extreme LED 30\" 5D. The top of the bumper comes pre-drilled for a pair of LP9 or LP6 pod lights positioned in front of the grille. LP9 lights are compatible with both the no-bull-bar and full-height bull bar configurations. Choosing a bull bar adds upper-face protection; the mid-height bar maintains Toyota Safety Sense compatibility across all Tundra grille types, while the full-height bar with tube gussets is compatible with TSS only on TRD Pro grilles.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHybrid plate-and-tube construction:\u003c\/strong\u003e 3\/16\" P\u0026amp;O steel center with .120-wall 1-3\/4\" HREW tube sides\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWinch-ready platform:\u003c\/strong\u003e 1\/4\" winch plate and 3\/8\" mounting plates; fits most 8K–12K lb winches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWelded D-ring tabs:\u003c\/strong\u003e 3\/4\" thick, welded front and back on every bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect bolt-on installation:\u003c\/strong\u003e no cutting or modifications required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePre-drilled for lighting:\u003c\/strong\u003e accepts 30\" single-row light bar and LP9\/LP6 pod lights on top\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2014–2021 Toyota Tundra (2nd Gen), fiberglass wide fenders only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCenter section material\u003c\/td\u003e\n      \u003ctd\u003e3\/16\" laser-cut P\u0026amp;O steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMounting plates\u003c\/td\u003e\n      \u003ctd\u003e3\/8\" thick\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch plate\u003c\/td\u003e\n      \u003ctd\u003e1\/4\" thick\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eTube material\u003c\/td\u003e\n      \u003ctd\u003e.120 wall, 1-3\/4\" diameter HREW tubing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eD-ring tabs\u003c\/td\u003e\n      \u003ctd\u003e3\/4\" thick, fully welded front and back\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch compatibility\u003c\/td\u003e\n      \u003ctd\u003eMost 8K–12K lb winches; confirmed: ComeUp, Smittybilt X20, Warn Zeon and VR series\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight, no bull bar (Raw)\u003c\/td\u003e\n      \u003ctd\u003e160 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight, mid-height bull bar (Raw)\u003c\/td\u003e\n      \u003ctd\u003e168 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight, full-height bull bar with tube gussets (Raw)\u003c\/td\u003e\n      \u003ctd\u003e176–177 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish options\u003c\/td\u003e\n      \u003ctd\u003eRaw bare steel (requires painting or powder coating before installation) or Powder Coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBull bar options\u003c\/td\u003e\n      \u003ctd\u003eNone; Mid-Height; Full-Height with Tube Gussets\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eParking sensor option\u003c\/td\u003e\n      \u003ctd\u003eAvailable\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSkid compatibility\u003c\/td\u003e\n      \u003ctd\u003eCompatible with TRD Pro skid and aftermarket skids\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper suits 2014–2021 Toyota Tundra owners running fiberglass wide fenders who want a winch-capable, lighting-ready front bumper with improved approach angle and a hybrid steel-and-tube aesthetic. It is a direct bolt-on replacement requiring no cutting, and it works with TRD Pro skids and most aftermarket skids.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit 2014–2021 Tundras with standard-width fenders; a separate listing covers that fitment. The full-height bull bar blocks the Toyota Safety Sense sensor on all non-TRD Pro grilles; buyers with standard grilles who rely on TSS should select the mid-height bull bar instead. Raw-finish orders ship as bare steel and must be painted or powder coated before installation to prevent rust; C4 Fabrication recommends test-fitting before coating to confirm alignment. A winch, lighting, and fairlead are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes installing this bumper require cutting or drilling the truck's frame?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe C4 Fabrication Tundra Hybrid Front Bumper is a direct bolt-on application for the 2014–2021 Toyota Tundra with fiberglass wide fenders. No cutting or modifications to the truck are required for installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich winches are confirmed to fit this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Hybrid Front Bumper's 1\/4\" winch plate accommodates most 8K–12K lb winches. Confirmed fitment includes ComeUp, Smittybilt X20, and Warn Zeon and VR series winches. Winches with the ability to relocate the control box are recommended, and synthetic rope with a hawse-style fairlead is recommended for best function.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill a bull bar block my Toyota Safety Sense camera or radar?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBull bar choice affects Toyota Safety Sense compatibility. The mid-height bull bar is compatible with TSS on all Tundra grille types. The full-height bull bar with tube gussets is compatible with TSS only on TRD Pro grilles; it will block the TSS sensor on standard grilles. Selecting no bull bar leaves TSS unaffected on any grille.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat light bars and pod lights fit this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Hybrid Front Bumper is designed for a 30\" single-row light bar. Confirmed-fit bars include the Baja Designs S8, Rigid SR Series, and Extreme LED 30\" 5D. The bumper also comes pre-drilled for a pair of LP9 or LP6 pod lights mounted on top in front of the grille. LP9 lights are compatible with both the no-bull-bar and full-height bull bar configurations. Lighting is not included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the raw steel finish need any treatment before installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRaw-finish Hybrid Front Bumpers ship as bare steel and must be painted or powder coated before installation to prevent rust. C4 Fabrication recommends test-fitting the bumper first to confirm proper alignment and fitment before sending it out for coating.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ No Bull Bar \/ No Parking Sensors","offer_id":50638059765830,"sku":"1400-3214-30-NB-NP-W","price":1825.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":50638059798598,"sku":"1400-3214-30-NB-PS-W","price":1905.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":50638059831366,"sku":"1400-3214-30-MH-NP-W","price":1900.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":50638059864134,"sku":"1400-3214-30-MH-PS-W","price":1980.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":50638059896902,"sku":"1400-3214-30-FH-NP-W","price":2010.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":50638059929670,"sku":"1400-3214-30-FH-PS-W","price":2120.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ No Parking Sensors","offer_id":50638059962438,"sku":"1400-3214-30-NB-NP-W-01NA","price":2059.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ No Bull Bar \/ Yes - Parking Sensors","offer_id":50638059995206,"sku":"1400-3214-30-NB-PS-W-01NA","price":2159.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ No Parking Sensors","offer_id":50638060027974,"sku":"1400-3214-30-MH-NP-W-01NA","price":2159.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Mid-Height Bull Bar \/ Yes - Parking Sensors","offer_id":50638060060742,"sku":"1400-3214-30-MH-PS-W-01NA","price":2259.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ No Parking Sensors","offer_id":50638060093510,"sku":"1400-3214-30-FH-NP-W-01NA","price":2159.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ Full-Height Bull Bar w\/ Tube Gussets \/ Yes - Parking Sensors","offer_id":50638060126278,"sku":"1400-3214-30-FH-PS-W-01NA","price":2399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2ndGenTundraHybridFrontBumperCover.jpg?v=1792012580","url":"https:\/\/terrainvault.com\/products\/c4-fabrication-tundra-hybrid-front-bumper-wide-fenders-2014-2021","provider":"TerrainVault","version":"1.0","type":"link"}