{"product_id":"c4-fabrication-4runner-rear-skid-plates-4th-gen-2003-2009","title":"C4 Fabrication 4Runner Rear Skid Plates 4th Gen 2003-2009","description":"\u003cp class=\"product-lead\"\u003eThe C4 Fabrication 4Runner Rear Skid Plates are a bolt-on underbody protection kit for the 4th Generation Toyota 4Runner (2003–2009), built from 3\/16-inch CNC-cut pickled and oiled steel and weighing 74 lb. The kit covers the transmission and transfer case and requires the C4 Fabrication Front Skid Plate, sold separately, to mount correctly. Two engine-specific versions are available: one for the V6 and one for the V8.\u003c\/p\u003e\n\n\u003ch2\u003eReinforced Transfer Case Coverage\u003c\/h2\u003e\n\u003cp\u003eA bolt-in crossmember is integrated into the skid plate kit specifically to reinforce protection around the transfer case, the component most exposed to rock strikes and trail debris in a 4Runner's underbody. Rather than relying on the skid plate shell alone, the crossmember adds a structural layer that distributes impact loads across the mounting points. For wheelers who run technical terrain where a single hard hit to the transfer case could end a trip, that added rigidity is meaningful insurance.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, No Cutting or Welding Required\u003c\/h2\u003e\n\u003cp\u003eThe 100% bolt-on design means the skid plates install using the included mounting hardware without any modification to the vehicle's frame or body. No cutting, no welding, and no fabrication shop visit required. All necessary hardware ships with the kit, so the installation can be completed with standard hand tools. C4 Fabrication recommends test-fitting before any finish work to confirm alignment before committing to a coating.\u003c\/p\u003e\n\n\u003ch2\u003eRaw or Powder-Coated Finish\u003c\/h2\u003e\n\u003cp\u003eThe skid plates are available in two finish options. The powder-coated version arrives ready to install with a corrosion-resistant finish already applied. The raw option ships as bare pickled and oiled steel, which must be painted or powder coated before installation to prevent rust. Both options are identical in steel gauge, geometry, and included hardware.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3\/16-inch CNC-cut pickled and oiled steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-in crossmember:\u003c\/strong\u003e Reinforces transfer case protection structurally\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e100% bolt-on design:\u003c\/strong\u003e No cutting or welding required for installation\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardware included:\u003c\/strong\u003e All mounting hardware ships with the kit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish options:\u003c\/strong\u003e Raw bare steel or powder coat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in USA:\u003c\/strong\u003e Manufactured by C4 Fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch CNC-cut pickled and oiled (P\u0026amp;O) steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e74 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCoverage\u003c\/td\u003e\n      \u003ctd\u003eTransmission and transfer case\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish options\u003c\/td\u003e\n      \u003ctd\u003eRaw (bare steel) \/ Powder Coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEngine fitment\u003c\/td\u003e\n      \u003ctd\u003eV6 or V8 (separate SKUs)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003eToyota 4Runner, 4th Generation, 2003–2009\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003e100% bolt-on; all mounting hardware included\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRequired companion product\u003c\/td\u003e\n      \u003ctd\u003eC4 Fabrication Front Skid Plate (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese skid plates suit 4th Generation Toyota 4Runner owners (2003–2009) who already have or are purchasing the C4 Fabrication Front Skid Plate and want bolt-on transmission and transfer case protection for off-road and overlanding use. Select the V6 or V8 version to match the engine in the vehicle.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese skid plates do not fit any Toyota 4Runner generation other than the 4th (2003–2009) and will not mount without the C4 Fabrication Front Skid Plate installed. The kit does not include a front skid plate, a fuel tank skid, or a differential skid; it covers the transmission and transfer case only. Raw-finish skids must be coated before installation to prevent rust.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo these skid plates work as a standalone underbody kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe C4 Fabrication 4Runner Rear Skid Plates do not function as a standalone kit. They are engineered to mount exclusively with the C4 Fabrication Front Skid Plate, which is sold separately. Without the front skid plate in place, the rear skids cannot be installed correctly.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy are there separate V6 and V8 versions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe V6 and V8 4th Generation 4Runners have different drivetrain configurations, so C4 Fabrication produces engine-specific skid plate versions to ensure correct fitment and coverage for each. Select the version that matches the engine in the specific 4Runner being equipped.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the raw finish option require before installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe raw-finish rear skid plates ship as bare pickled and oiled steel and must be painted or powder coated before installation to prevent rust. C4 Fabrication recommends completing a test fit first to confirm alignment, then applying the chosen finish before final installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe C4 Fabrication 4Runner Rear Skid Plates kit includes the transmission skid plate, the transfer case skid plate, a bolt-in crossmember, and all mounting hardware. The C4 Fabrication Front Skid Plate is not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs professional installation required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe rear skid plates use a 100% bolt-on design with no cutting or welding required, and all mounting hardware is included. Installation can be completed with standard hand tools, though familiarity with underbody work on a 4th Generation 4Runner is helpful for confirming correct alignment before torquing fasteners.\u003c\/p\u003e","brand":"C4 Fabrication","offers":[{"title":"Raw \/ V8","offer_id":50623506743366,"sku":"1103-58200","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Raw \/ V6","offer_id":50623506776134,"sku":"1100-5403-R","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ V8","offer_id":50623506808902,"sku":"1103-58200-01NA","price":659.99,"currency_code":"USD","in_stock":true},{"title":"Powder Coat \/ V6","offer_id":50623506841670,"sku":"1100-5403-R-01NA","price":559.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/4thGen4RunnerRearSkidsCover_52785e1d-c640-4e8d-a991-da8dd3e209af.jpg?v=1791941912","url":"https:\/\/terrainvault.com\/products\/c4-fabrication-4runner-rear-skid-plates-4th-gen-2003-2009","provider":"TerrainVault","version":"1.0","type":"link"}