{"product_id":"addictive-desert-designs-stealth-fighter-winch-front-bumper-for-ford-f","title":"Addictive Desert Designs Stealth Fighter Winch Front Bumper for Ford F-150","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs Stealth Fighter Winch Front Bumper is a steel bolt-on front bumper built for 2024 and newer Ford F-150 trucks. A heavy-duty winch mount, reinforced clevis mounts for soft shackles, and a multi-position light-bar system make this bumper a capable recovery and lighting platform. Integrated sensor cutouts keep the bumper compatible with both sensor-equipped and non-sensor F-150 models.\u003c\/p\u003e\n\n\u003ch2\u003eRadius Plate Steel Built to Sit Flush\u003c\/h2\u003e\n\u003cp\u003eThe Stealth Fighter uses a radius plate steel design that follows the curved front edge of the 2024+ F-150 closely, keeping the bumper as flush to the truck as possible. A bumper that sits close to the factory line reduces the leverage forces on mounting points during off-road impacts and keeps approach angles from suffering more than necessary. The entire bumper is sandblasted before receiving a two-stage hammer black powder coat finish, with satin black powder-coated accent panels adding contrast. Sandblasting first, then powder coating, gives the coating a mechanical bond to bare steel rather than sitting on top of surface oxidation, which matters for a part that takes trail debris and road spray every time the truck moves.\u003c\/p\u003e\n\n\u003ch2\u003eWinch and Recovery Ready from the Factory Mount Points\u003c\/h2\u003e\n\u003cp\u003eThe Stealth Fighter's winch mounting plate positions the winch between the frame rails rather than in front of them, preserving the bumper's low-profile appearance while keeping the winch load path direct to the frame. The winch plate mounts to the truck's own frame, not to the bumper shell, so recovery loads transfer to the strongest point on the vehicle. Reinforced clevis mounts are integrated into the bumper for soft shackle attachment, giving a dedicated, rated anchor point for snatch-strap and recovery-strap rigging without relying on improvised tie-down points.\u003c\/p\u003e\n\n\u003ch2\u003eUniversal Light Mount System for Any Brand\u003c\/h2\u003e\n\u003cp\u003eThe center mount accepts one 40-inch radius light bar or up to ten cube lights. The mount is designed specifically for a curved (radius) light bar, which matters because a straight bar in a radius-cut opening leaves gaps and requires custom brackets. Each side mount fits one 10-inch single-row light bar or one cube light, so the bumper can carry a full three-zone lighting setup. The system is described as universal, meaning it is not restricted to a single light brand. A shutter motor bracket is included in the box.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRadius plate steel construction:\u003c\/strong\u003e follows the F-150's front profile for a close, flush fit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeavy-duty winch mount:\u003c\/strong\u003e concealed between frame rails, bolts directly to truck frame\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced clevis mounts:\u003c\/strong\u003e integrated soft-shackle anchor points for trail recovery\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMulti-zone light mounting:\u003c\/strong\u003e center mount for one 40\" radius light bar or ten cube lights; each side mount for one 10\" single-row light bar or one cube light\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor cutouts:\u003c\/strong\u003e compatible with sensor and non-sensor F-150 models\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo-stage hammer black powder coat with satin black accent panels:\u003c\/strong\u003e applied over sandblasted steel\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eFully bolt-on installation, made in the USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2024+ Ford F-150\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eSteel (radius plate construction)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eTwo-stage hammer black powder coat; satin black powder-coated accent panels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e201 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch mount\u003c\/td\u003e\n      \u003ctd\u003eHeavy-duty, concealed between frame rails, mounts to truck frame\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight mounts\u003c\/td\u003e\n      \u003ctd\u003eCenter: one 40\" radius light bar or ten cube lights; each side: one 10\" single-row light bar or one cube light\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSensor compatibility\u003c\/td\u003e\n      \u003ctd\u003eSensor and non-sensor models (integrated cutouts)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded hardware\u003c\/td\u003e\n      \u003ctd\u003eShutter motor bracket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of origin\u003c\/td\u003e\n      \u003ctd\u003eMade in the USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF1901422860103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Stealth Fighter Winch Front Bumper suits 2024 and newer Ford F-150 owners, including sensor-equipped trucks, who want a steel bolt-on front bumper with integrated winch capability and a flexible light-bar mounting system for overlanding, trail recovery, or off-road driving. Trucks with the 3.5L engine are compatible when the High Mount Intercooler Upgrade Kit is also installed. Power Boost models are compatible after the pedestrian alert speaker is relocated. F-150s equipped with Adaptive Cruise Control require the Adaptive Cruise Control Relocation Bracket.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit 2024+ Ford F-150 models with the 2.7L EcoBoost or Diesel engines. Adaptive cruise control functionality is not compatible with Platinum or King Ranch trim models, or with brush nickel finished grilles. The winch, lights, High Mount Intercooler Upgrade Kit, and Adaptive Cruise Control Relocation Bracket are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit a 2024 F-150 with the 3.5L EcoBoost engine?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter Winch Front Bumper fits 2024 and newer Ford F-150 trucks with the 3.5L engine, but the High Mount Intercooler Upgrade Kit is required for that engine configuration and must be purchased separately. The bumper does not fit F-150 models with the 2.7L EcoBoost or Diesel engines.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs a winch included with this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo winch is included. The Stealth Fighter Winch Front Bumper provides a heavy-duty winch mounting plate that positions a winch between the frame rails and bolts directly to the truck's frame, but the winch itself must be purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat size light bar fits the center mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe center mount on the Stealth Fighter Winch Front Bumper accepts one 40-inch radius light bar or up to ten cube lights. The mount is designed specifically for a curved (radius) light bar. Each side mount fits one 10-inch single-row light bar or one cube light. Lights are sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this bumper work with my truck's front parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter Winch Front Bumper includes integrated sensor cutouts and is compatible with both sensor-equipped and non-sensor 2024+ Ford F-150 models. F-150s with Adaptive Cruise Control require the Adaptive Cruise Control Relocation Bracket, sold separately, and ACC is not compatible with Platinum or King Ranch trims or brush nickel finished grilles.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow difficult is installation, and what tools are required?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter Winch Front Bumper is fully bolt-on, meaning no cutting or welding is required. Addictive Desert Designs provides a bumper install guide and an ACC bracket install guide. No tool list or estimated install time is specified; the bumper weighs 201 lb and a two-person install is advisable.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50638087979078,"sku":"F1901422860103","price":2798.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2024-Ford-F-150-Stealth-Fighter-Winch-Front-Bumper-4-sq.jpg?v=1792012740","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-stealth-fighter-winch-front-bumper-for-ford-f","provider":"TerrainVault","version":"1.0","type":"link"}