{"product_id":"addictive-desert-designs-stealth-fighter-winch-front-bumper-for-2021-2","title":"Addictive Desert Designs Stealth Fighter Winch Front Bumper for 2021–2023 Ford F-150","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs Stealth Fighter Winch Front Bumper is a plate steel front replacement bumper for 2021–2023 Ford F-150 trucks, built with a radiused front edge that pulls the profile tight to the truck's body. A winch mount is integrated into the design, and a universal center light mount accommodates up to a 40-inch radius light bar or 10 cube lights. The bumper fits both sensor-equipped and non-sensor F-150s, with engine- and trim-specific requirements noted below.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt Tight, Built to Last\u003c\/h2\u003e\n\u003cp\u003eThe Stealth Fighter's radiused plate steel construction is designed to sit as close to the truck as possible, reducing the visual bulk that makes many aftermarket bumpers look afterthought rather than integrated. That tight fit also means less leverage on the mounting points when the bumper takes an impact, keeping stress where the frame can handle it rather than at the edges of the steel. After sandblasting, the entire bumper receives a hammer black powder coat finish; side panels carry a satin black powder coat finish. Both finishes are applied before the bumper ships, so there is no field finishing required.\u003c\/p\u003e\n\n\u003ch2\u003eLight and Recovery Mounting Built In\u003c\/h2\u003e\n\u003cp\u003eThe center section of the Stealth Fighter carries a universal mount rated for up to a 40-inch radius light bar or as many as 10 cube lights, giving drivers the flexibility to run a single wide bar or a spread of smaller pods without adapters. Each side panel adds an independent mount sized for a 10-inch single-row light bar or a cube light, useful for corner lighting or ditch lights that a center bar cannot cover. Reinforced clevis mounts on both sides accept soft shackles for recovery points, and the integrated winch mount means a winch can be added without a separate winch plate or adapter.\u003c\/p\u003e\n\n\u003ch2\u003eBolt-On Installation, Made in the USA\u003c\/h2\u003e\n\u003cp\u003eThe Stealth Fighter is fully bolt-on and designed to work with the factory mounting points on 2021–2023 F-150s. Sensor cutouts are built into the bumper, so trucks with factory sensors do not require sensor deletion or relocation. A shutter motor bracket is included. Trucks with adaptive cruise control (other than Platinum, King Ranch, or brush nickel grille models) require an ACC relocation bracket, sold separately. Power Boost models require the pedestrian alert speaker to be relocated. The bumper is designed and manufactured in Chandler, Arizona.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated winch mount:\u003c\/strong\u003e accommodates a winch without a separate winch plate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter light mount:\u003c\/strong\u003e holds up to a 40-inch radius light bar or 10 cube lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSide panel light mounts:\u003c\/strong\u003e each side accepts a 10-inch single-row light bar or a cube light\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced clevis mounts:\u003c\/strong\u003e accept soft shackles for recovery use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor-compatible cutouts:\u003c\/strong\u003e fits sensor and non-sensor F-150 models\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eShutter motor bracket included\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMade in USA:\u003c\/strong\u003e designed and manufactured in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003ePlate steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain finish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanel finish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShipping weight\u003c\/td\u003e\n      \u003ctd\u003eApprox. 201 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCenter light mount capacity\u003c\/td\u003e\n      \u003ctd\u003eUp to 40-inch radius light bar or 10 cube lights\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSide panel light mount capacity\u003c\/td\u003e\n      \u003ctd\u003e10-inch single-row light bar or cube light (each side)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRecovery mounts\u003c\/td\u003e\n      \u003ctd\u003eReinforced clevis mounts, soft shackle compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWinch mount\u003c\/td\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eShutter motor bracket\u003c\/td\u003e\n      \u003ctd\u003eIncluded\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle fitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2023 Ford F-150\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEngine exclusions\u003c\/td\u003e\n      \u003ctd\u003eNot compatible with 2.7L EcoBoost or Diesel models\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003e3.5L engine note\u003c\/td\u003e\n      \u003ctd\u003eRequires High Mount Intercooler Upgrade Kit (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eACC note\u003c\/td\u003e\n      \u003ctd\u003eNot compatible with Platinum, King Ranch, or brush nickel grille models; other ACC-equipped trucks require ACC relocation bracket (sold separately)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePower Boost note\u003c\/td\u003e\n      \u003ctd\u003ePedestrian alert speaker relocation required\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Stealth Fighter Winch Front Bumper suits 2021–2023 Ford F-150 owners (excluding 2.7L EcoBoost and Diesel models) who want a low-profile plate steel front bumper with integrated winch capability, flexible light mounting across the center and sides, and soft-shackle recovery points, all in a bolt-on fitment that retains factory sensors.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit 2.7L EcoBoost or Diesel F-150 models. It is not compatible with adaptive cruise control on Platinum, King Ranch, or brush nickel grille trims. Lights, winch, soft shackles, the High Mount Intercooler Upgrade Kit (required for 3.5L models), and the ACC relocation bracket (required for most other ACC-equipped trucks) are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Stealth Fighter Winch Front Bumper work with my factory parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Stealth Fighter includes sensor cutouts designed for both sensor-equipped and non-sensor 2021–2023 Ford F-150 trucks, so factory parking sensors remain in their stock locations and do not need to be deleted or relocated.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the winch included, or just the winch mount?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter Winch Front Bumper includes an integrated winch mount. The winch itself is not included and must be purchased separately. The mount eliminates the need for a separate winch plate or adapter.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights are compatible with the center and side mounts?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe center mount on the Stealth Fighter accommodates up to a 40-inch radius light bar or as many as 10 cube lights. Each side panel mount fits a 10-inch single-row light bar or one cube light. Lights are not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit my 3.5L EcoBoost F-150?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter is compatible with 3.5L F-150 models, but those trucks require the High Mount Intercooler Upgrade Kit, which is sold separately. The bumper is not compatible with 2.7L EcoBoost or Diesel models at all.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box, and is professional installation recommended?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Stealth Fighter Winch Front Bumper ships with a shutter motor bracket included. An ACC relocation bracket is required for most adaptive-cruise-control-equipped trucks and is sold separately. Given the weight and the engine- and trim-specific fitment requirements, professional installation is recommended.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50630398410822,"sku":"F191422860103","price":2798.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2021-Ford-F150-winch-front-bumper_db765efe-8901-4c9e-9f37-03-sq.jpg?v=1791954571","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-stealth-fighter-winch-front-bumper-for-2021-2","provider":"TerrainVault","version":"1.0","type":"link"}