{"product_id":"addictive-desert-designs-honeybadger-rear-bumper-for-ford-f-150-raptor","title":"Addictive Desert Designs HoneyBadger Rear Bumper for Ford F-150 Raptor","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs HoneyBadger Rear Bumper is a plate-steel, bolt-on replacement rear bumper built for the 2021-2026 Ford F-150 Raptor, with Raptor R compatibility covering the 2021-2023 model years. Constructed in a modern box design and finished in hammer black powder coat, the HoneyBadger is shaped to follow the Raptor's dovetail rear body lines and retains every factory function the stock bumper provides: backup sensors, tow hooks, license plate lights, and tow wiring plug.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to the Raptor's Body, Not Around It\u003c\/h2\u003e\n\u003cp\u003eThe HoneyBadger's profile is engineered to track the Raptor's distinctive dovetail rear body style closely, so the fitment reads as intentional rather than bolted-on. The factory dual exhaust exits and OEM tow hooks sit comfortably below the bumper without modification, meaning the truck's towing and exhaust geometry are unchanged after installation. For a truck that already draws attention, a rear bumper that fits the lines tightly matters as much as the protection it adds.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Functionality, Fully Retained\u003c\/h2\u003e\n\u003cp\u003eSensor cutouts are machined into the bumper so the factory parking and backup warning system operates without recalibration or delete. The OEM license plate lights, tow hooks, and tow wiring plug or harness all mount in their original positions. A factory or aftermarket trailer wiring harness can be routed to the bottom of the bumper near the hitch receiver location. Retaining these systems means the HoneyBadger installs as a direct replacement rather than a trade-off between protection and daily usability.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Mounts and Recovery Points Built In\u003c\/h2\u003e\n\u003cp\u003eEach end of the bumper carries a mount sized for a 10-inch LED light bar, recessed behind a satin black aluminum accent panel with a badger claw cutout. Two additional cube light mounts are positioned on either side of the bumper's center section for supplemental lighting. Two 1-inch clevis mounts accept soft shackles and provide dedicated recovery attachment points. LED light bars, cube lights, and shackles are not included; the bumper provides the mounting positions for each.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate steel box construction:\u003c\/strong\u003e hammer black powder coat finish over a sandblasted surface\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor cutouts:\u003c\/strong\u003e compatible with factory backup and parking warning sensors\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM retention:\u003c\/strong\u003e tow hooks, license plate lights, and tow wiring plug or harness all retained\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e10-inch LED light bar mounts:\u003c\/strong\u003e one per side, behind satin black aluminum accent panels with badger claw cutouts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCube light mounts:\u003c\/strong\u003e two positions flanking the center of the bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e1-inch clevis mounts:\u003c\/strong\u003e two reinforced mounts accept soft shackles for recovery use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e made in the USA at Addictive Desert Designs' Chandler, Arizona facility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Material\u003c\/td\u003e\n      \u003ctd\u003ePlate steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccent Panel Material\u003c\/td\u003e\n      \u003ctd\u003eAluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBumper Finish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat (over sandblasted surface)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eAccent Panel Finish\u003c\/td\u003e\n      \u003ctd\u003eSatin black\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e101 lb\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eClevis Mounts\u003c\/td\u003e\n      \u003ctd\u003eTwo, 1-inch, soft-shackle compatible\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLED Light Bar Mounts\u003c\/td\u003e\n      \u003ctd\u003eTwo (one per side), sized for 10-inch bars\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCube Light Mounts\u003c\/td\u003e\n      \u003ctd\u003eTwo, center-flanking positions\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eBolt-on, no cutting or welding\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2021-2023 Ford F-150 Raptor and Raptor R; 2024-2026 Ford F-150 Raptor\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eR210151430103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe HoneyBadger Rear Bumper suits 2021-2023 Ford F-150 Raptor and Raptor R owners, and 2024-2026 Ford F-150 Raptor owners, who want a steel replacement bumper that adds recovery points and lighting mount positions without giving up any factory sensor, lighting, or towing functionality.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe HoneyBadger Rear Bumper does not fit the 2024-2026 Ford F-150 Raptor R. LED light bars, cube lights, soft shackles, and trailer wiring harnesses are not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper work with the factory backup sensors on the 2021-2026 Ford F-150 Raptor?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The HoneyBadger Rear Bumper includes machined sensor cutouts that allow the factory parking and backup warning sensors to operate without modification or recalibration. All OEM sensor functionality is retained after installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre LED light bars or cube lights included with the bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The HoneyBadger Rear Bumper provides two 10-inch LED light bar mounts (one per side, behind the satin black aluminum accent panels) and two cube light mounts near the center, but the lights themselves are not included and must be purchased separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit the 2024-2026 Ford F-150 Raptor R?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The HoneyBadger Rear Bumper fits the 2021-2023 Ford F-150 Raptor and Raptor R, and the 2024-2026 Ford F-150 Raptor. The 2024-2026 Raptor R is not a confirmed fitment for this bumper.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat factory features does the HoneyBadger Rear Bumper retain?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger Rear Bumper retains the OEM tow hooks, license plate lights, and tow wiring plug or harness. The factory dual exhaust exits sit below the bumper without modification. A factory or aftermarket trailer wiring harness can also be routed to the bumper's hitch area.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat are the clevis mounts used for, and what size shackle do they accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger Rear Bumper includes two reinforced 1-inch clevis mounts, one on each side of the bumper, designed to accept soft shackles for vehicle recovery. Soft shackles are not included with the bumper.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper bolt-on, or does installation require cutting or welding?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger Rear Bumper is a fully bolt-on replacement. No cutting or welding is required. Addictive Desert Designs provides install instructions with the bumper.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50629659820102,"sku":"R210151430103","price":2498.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/r210151430103-sq.jpg?v=1791950595","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-honeybadger-rear-bumper-for-ford-f-150-raptor","provider":"TerrainVault","version":"1.0","type":"link"}