{"product_id":"addictive-desert-designs-honeybadger-front-bumper-with-top-hoop-for-ford-f-150-raptor","title":"Addictive Desert Designs HoneyBadger Front Bumper with Top Hoop for Ford F-150 Raptor","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs HoneyBadger Front Bumper with Top Hoop is a bolt-on plate steel front bumper built for the 2021–2026 Ford F-150 Raptor and Raptor R. Its angular, body-line-hugging profile carries four LED light bar mounting positions and retains compatibility with factory parking sensors on both the 800A and 801A packages. A shutter motor bracket is included with every shipment.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt Tight to the Truck\u003c\/h2\u003e\n\u003cp\u003eThe HoneyBadger's modern plate steel construction is shaped to sit as close to flush with the F-150 Raptor's front fascia as possible, following the factory body lines rather than standing away from them. The steel body is finished in a hammer black powder coat and the aluminum side panels in a satin black powder coat, both chosen to resist rust and corrosion over years of trail use. Because the bumper is fully bolt-on and manufactured in Chandler, Arizona, no cutting or custom fabrication is required for installation.\u003c\/p\u003e\n\n\u003ch2\u003eFour LED Light Bar Mounting Positions\u003c\/h2\u003e\n\u003cp\u003eThe HoneyBadger with Top Hoop provides mounting positions for four separate LED light bars without requiring any additional brackets or custom welding. The top hoop carries a mount for a 30-inch radius LED light bar and partially shields it from debris. A 20-inch straight LED light bar mounts in a protected position behind the HoneyBadger claw cutaways at the center of the bumper. Two additional 10-inch light bars mount behind the open side panels, which allow light to pass through unobstructed. Light bars are not included and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eSensor and ACC Compatibility Preserved\u003c\/h2\u003e\n\u003cp\u003eTrucks equipped with the 801A High package can have their factory front parking sensors installed directly into the bumper without modification. Trucks with the 800A Standard package receive sensor plugs in the shipment to close the mounting holes cleanly. Adaptive cruise control function requires the addition of an ACC Relocation Bracket, sold separately. The bumper may also obstruct the factory front camera view, and a front camera relocation kit, sold separately, is worth considering at installation time.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate steel construction:\u003c\/strong\u003e modern angular design sits tight to the front of the truck\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop hoop with 30\" radius LED mount:\u003c\/strong\u003e partially protects the light bar from trail debris\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20\" straight LED mount:\u003c\/strong\u003e center position behind the HoneyBadger claw cutaways\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10\" light bar mounts:\u003c\/strong\u003e one behind each open side panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual powder coat finish:\u003c\/strong\u003e hammer black on steel, satin black on aluminum panels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensor compatibility:\u003c\/strong\u003e fits 801A sensor trucks; sensor plugs included for 800A non-sensor trucks\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBolt-on installation, Made in USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford F-150 Raptor \u0026amp; Raptor R\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary Material\u003c\/td\u003e\n      \u003ctd\u003ePlate steel (body); aluminum (side panels)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat (steel); satin black powder coat (aluminum panels)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Bar Mounts\u003c\/td\u003e\n      \u003ctd\u003e30\" radius (top hoop), 20\" straight (center), 10\" (each side panel)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSensor Compatibility\u003c\/td\u003e\n      \u003ctd\u003e801A High package (direct fit); 800A Standard package (sensor plugs included)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eIncluded Hardware\u003c\/td\u003e\n      \u003ctd\u003eShutter motor bracket; sensor plugs (for 800A trucks)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003e184.99 lb (shipping weight)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bumper is built for owners of 2021–2026 Ford F-150 Raptor and Raptor R trucks who want a body-line-matched steel front bumper with extensive LED light bar mounting capability and full retention of factory sensor hardware.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis bumper does not fit any F-150 outside the 2021–2026 Raptor and Raptor R, including standard F-150 trims and the previous-generation Raptor. LED light bars, the ACC Relocation Bracket, the Intercooler Kit (IC1650KIT), the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), and any front camera relocation kit are sold separately and are not included. Trucks with the 801A High package that also install the Intercooler Upgrade Kit require a Shutter Motor Relocation Kit (sold separately); 2024 and newer models installing that kit require an additional shutter motor relocation kit.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich Ford F-150 models does this bumper fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Addictive Desert Designs HoneyBadger Front Bumper with Top Hoop fits the 2021–2026 Ford F-150 Raptor and Raptor R only. It does not fit standard F-150 trims or any earlier Raptor generation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat light bars can be mounted, and are they included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger bumper with Top Hoop provides four mounting positions: a 30-inch radius LED light bar on the top hoop, a 20-inch straight LED light bar in the center, and a 10-inch light bar behind each side panel. No light bars are included; all are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper work with factory parking sensors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Trucks with the 801A High package can have their factory front parking sensors installed directly into the HoneyBadger bumper. Trucks with the 800A Standard package receive sensor plugs in the shipment to close the unused mounting holes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat happens to adaptive cruise control after installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger front bumper requires an Adaptive Cruise Control Relocation Bracket, sold separately, to maintain full ACC function. Without it, ACC capability may be lost. The bumper may also block the factory front camera view, and a front camera relocation kit is worth considering at installation time.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs a shutter motor bracket included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA shutter motor bracket is included with every shipment of this HoneyBadger bumper. If the Intercooler Upgrade Kit (IC1650KIT, sold separately) is also being installed, a Shutter Motor Relocation Kit is required; 2024 and newer Raptor models installing that kit require an additional shutter motor relocation kit, also sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this bumper compatible with the Raptor Intercooler Kit or Raptor R Heat Exchanger Kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe HoneyBadger front bumper is compatible with the Raptor Intercooler Kit (IC1650KIT, sold separately) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA, sold separately). Installing the Intercooler Kit also requires a Shutter Motor Relocation Kit; 2024 and newer Raptor models require an additional shutter motor relocation kit for that installation.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50630376521798,"sku":"F210221180103","price":2898.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/f210221180103_d4ac121b-93cf-4499-bb1f-474814f41533-sq.jpg?v=1791954405","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-honeybadger-front-bumper-with-top-hoop-for-ford-f-150-raptor","provider":"TerrainVault","version":"1.0","type":"link"}