{"product_id":"addictive-desert-designs-dual-ditch-light-brackets-for-ford-bronco-bro","title":"Addictive Desert Designs Dual Ditch Light Brackets for Ford Bronco \u0026 Bronco Raptor","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs Dual Ditch Light Brackets mount two independent pod lights per side on the hood cowl of 2021–2026 Ford Bronco and Bronco Raptor (all trims), using the factory accessory mounting holes for a fully bolt-on installation with no drilling required. Built from 3\/16-inch steel with a two-stage hammer black powder coat finish, these brackets are made in the USA and fit all Bronco trims in the 2021–2026 model year range.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Lights, Two Jobs\u003c\/h2\u003e\n\u003cp\u003eBecause each light on the Addictive Desert Designs Dual Ditch Light Brackets pivots independently, a driver can run one pod forward-facing for trail illumination and one angled outward as a true ditch light at the same time. That flexibility means a single bracket position covers two lighting tasks without adding a second mounting location. Swapping between a clear lens for standard visibility and an amber lens for dusty conditions is equally straightforward, since the two pods on each bracket operate independently.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile, Bolt-On Installation\u003c\/h2\u003e\n\u003cp\u003eThe brackets attach directly to the Bronco's factory accessory mounting holes, so no drilling, cutting, or welding is involved. The low-profile design keeps the exterior pod positioned as a genuine ditch light while allowing the interior pod to face forward without extending too far over the hood line. Integrated wire management channels are built into the bracket, so cabling stays routed cleanly rather than zip-tied across the cowl.\u003c\/p\u003e\n\n\u003ch2\u003e3\/16-Inch Steel Built for the Trail\u003c\/h2\u003e\n\u003cp\u003eThe Dual Ditch Light Brackets are fabricated from heavy-duty 3\/16-inch steel, the same material gauge Addictive Desert Designs uses across its bumper and armor line. A two-stage hammer black powder coat finish provides corrosion resistance and a consistent appearance that holds up under trail debris, water, and UV exposure. The brackets are manufactured in the USA.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual or single light compatibility:\u003c\/strong\u003e mounts two up-to-4-inch round LED pod lights per side, or one up-to-6-inch round LED light per side\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndependent light adjustment:\u003c\/strong\u003e each pod pivots separately for simultaneous forward-facing and side-facing configurations\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBolt-on installation:\u003c\/strong\u003e attaches to factory accessory mounting holes with no drilling required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntegrated wire management:\u003c\/strong\u003e built-in routing channels keep wiring concealed and secure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16-inch steel construction:\u003c\/strong\u003e heavy-duty gauge for durability under off-road conditions\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo-stage hammer black powder coat finish:\u003c\/strong\u003e corrosion-resistant, low-glare surface treatment\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eMade in USA\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eVehicle Fitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford Bronco \u0026amp; Bronco Raptor, All Trims\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch steel\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eTwo-stage hammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Capacity (dual)\u003c\/td\u003e\n      \u003ctd\u003eTwo up-to-4-inch round LED pod lights per side\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLight Capacity (single)\u003c\/td\u003e\n      \u003ctd\u003eOne up-to-6-inch round LED light per side\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eBolt-on to factory accessory mounting holes\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n      \u003ctd\u003eUSA\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eAC2301801NA\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese brackets suit 2021–2026 Ford Bronco and Bronco Raptor owners across all trims who want to add ditch lighting using round LED pod lights. The independent pivot on each mount makes them a strong fit for overlanders and trail drivers who need both forward illumination and side coverage from a single bracket position.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets do not fit any vehicle other than the 2021–2026 Ford Bronco and Bronco Raptor. Pod lights are not included and must be sourced separately. Buyers who need to mount lights larger than 4 inches in a dual configuration, or larger than 6 inches in a single configuration, will need a different bracket solution.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDo pod lights come included with the Dual Ditch Light Brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo pod lights are included with the Addictive Desert Designs Dual Ditch Light Brackets. The brackets are sold on their own, and compatible round LED pod lights must be purchased separately. Each bracket accepts two up-to-4-inch round pods or one up-to-6-inch round pod per side.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat size round pod lights do these brackets accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIn a dual-light configuration, the Dual Ditch Light Brackets accept up to two 4-inch round LED pod lights per side. In a single-light configuration, each bracket can accommodate one round LED light up to 6 inches in diameter. Lights larger than those sizes are not compatible with this bracket.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the two pod lights on each bracket be aimed in different directions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Each pod light on the Dual Ditch Light Brackets pivots independently, so one light can be aimed forward for trail illumination while the other angles outward as a true ditch light. This also allows running a clear-lens pod alongside an amber-lens pod on the same bracket for different lighting conditions.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation require drilling into the Bronco's hood or body?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo drilling is required. The Dual Ditch Light Brackets bolt directly to the factory accessory mounting holes already present on the 2021–2026 Ford Bronco and Bronco Raptor hood cowl. The installation is fully bolt-on.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is wiring managed with these brackets?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Dual Ditch Light Brackets include integrated wire management channels built into the bracket body. These channels route and secure the pod light wiring without requiring additional zip ties or adhesive mounts across the cowl, keeping the installation clean and reducing the chance of wire chafing.\u003c\/p\u003e\n\n\u003cp\u003eWARNING: This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50638107705414,"sku":"AC2301801NA","price":148.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2021_Ford_Bronco_DLB_Offtruck-01-sq.jpg?v=1792013403","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-dual-ditch-light-brackets-for-ford-bronco-bro","provider":"TerrainVault","version":"1.0","type":"link"}