{"product_id":"addictive-desert-designs-capture-fairlead-black","title":"Addictive Desert Designs Capture Fairlead Black","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs Capture Fairlead is a CNC machined aerospace aluminum hook-capture fairlead rated to 20,000 lbs, designed to hold a winch hook in place when not in use and maintain a clean, low-profile front end on aftermarket winch bumpers. This listing is for the black military-grade hard anodized finish version. Compatible with synthetic winch rope only.\u003c\/p\u003e\n\n\u003ch2\u003eHook Stays Put, Front End Stays Clean\u003c\/h2\u003e\n\u003cp\u003eA winch hook that hangs loose outside the bumper catches wind, rattles on rough terrain, and chips paint or finish on whatever it contacts. The Capture Fairlead solves this by securing the hook in a fixed position when the winch is not in use. The result is a front end that looks intentional rather than unfinished, and a hook that is ready to deploy without first untangling it from wherever it swung to on the last trail.\u003c\/p\u003e\n\n\u003ch2\u003e20,000 lb Rating Built Into the Material\u003c\/h2\u003e\n\u003cp\u003eThe Capture Fairlead is machined from 1 5\/16-inch thick aerospace aluminum. The 20,000 lb load rating means the fairlead is not the weak point in a recovery setup for most overland and off-road rigs. Machining the part from a single billet rather than casting or stamping it removes the porosity and inconsistency that can compromise a load-bearing component under real recovery stress.\u003c\/p\u003e\n\n\u003ch2\u003eMilitary-Grade Hard Anodized Finish\u003c\/h2\u003e\n\u003cp\u003eThe black version of the Capture Fairlead carries a military-grade hard anodized finish. Hard anodizing converts the aluminum surface into aluminum oxide, which is significantly harder than the base metal and resistant to abrasion, UV exposure, and corrosion from mud, salt, and moisture. The finish does not peel or chip the way paint does, which matters on a component mounted at the front of a vehicle that takes road debris and brush contact regularly.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness:\u003c\/strong\u003e 1 5\/16 inches, CNC machined from aerospace aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad Rating:\u003c\/strong\u003e Rated to 20,000 lbs\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Military-grade hard anodized black\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHook Capture:\u003c\/strong\u003e Holds winch hook in place when not in use\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRope Compatibility:\u003c\/strong\u003e Synthetic winch rope only\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMaterial\u003c\/td\u003e\n      \u003ctd\u003eCNC machined aerospace aluminum\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eThickness\u003c\/td\u003e\n      \u003ctd\u003e1 5\/16 in\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFinish\u003c\/td\u003e\n      \u003ctd\u003eMilitary-grade hard anodized black\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLoad Rating\u003c\/td\u003e\n      \u003ctd\u003e20,000 lbs\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eRope Compatibility\u003c\/td\u003e\n      \u003ctd\u003eSynthetic winch rope only\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eBumper Compatibility\u003c\/td\u003e\n      \u003ctd\u003eFits nearly any aftermarket winch front bumper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePatent\u003c\/td\u003e\n      \u003ctd\u003eUS 10519012 B1\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eWARNING (California Proposition 65):\u003c\/strong\u003e This product can expose you to chemicals including silica, crystalline, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Capture Fairlead suits overlanders and off-road drivers who run a winch on an aftermarket front bumper and want the hook secured and out of the way when the winch is not in use. It is a strong fit for builds where a clean, low-profile front end matters alongside functional recovery capability, and where synthetic winch rope is already in use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Capture Fairlead is not compatible with wire or steel winch rope: synthetic rope only. It requires an aftermarket winch front bumper; it is not designed for stock or OEM bumpers. A raw aluminum finish version is sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Capture Fairlead work with steel wire winch rope?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Addictive Desert Designs Capture Fairlead is designed for synthetic winch rope only and is not compatible with steel wire rope. Using steel cable with this fairlead is not supported and may damage the rope, the fairlead, or both.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the load rating on the Capture Fairlead?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Capture Fairlead is rated to 20,000 lbs. It is CNC machined from 1 5\/16-inch thick aerospace aluminum, which provides the structural capacity for that rating without relying on cast or stamped construction.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this fairlead fit my bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Capture Fairlead is designed to fit nearly any aftermarket winch front bumper. It is not intended for stock or OEM bumpers. If you are unsure whether your specific bumper is compatible, confirm the mounting pattern before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the finish on the black version, and how durable is it?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe black Capture Fairlead has a military-grade hard anodized finish. Hard anodizing converts the aluminum surface into aluminum oxide, which resists abrasion, UV, and corrosion from mud, salt, and moisture. Unlike paint, it does not peel or chip under normal off-road use.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere is the Capture Fairlead made?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Capture Fairlead is designed, machined, and finished in Chandler, Arizona. All design, development, manufacturing, and testing are performed at Addictive Desert Designs' facility in the United States.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50630532071494,"sku":"AC99157590NA","price":318.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/Winch-fairlead_deffb205-01f1-4ee5-a105-0ad25e335c52-sq.jpg?v=1791955912","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-capture-fairlead-black","provider":"TerrainVault","version":"1.0","type":"link"}