{"product_id":"addictive-desert-designs-bomber-front-bumper-for-ford-f-150-raptor-and","title":"Addictive Desert Designs Bomber Front Bumper for Ford F-150 Raptor and Raptor R","description":"\u003cp class=\"product-lead\"\u003eThe Addictive Desert Designs Bomber Front Bumper is a fully bolt-on steel-and-aluminum front bumper built for the 2021–2026 Ford F-150 Raptor and Raptor R. Constructed from plate steel with lightweight aluminum panels and a 3\/16-inch aluminum skid plate, the Bomber delivers front-end protection while coming in lighter than the factory bumper. This Baja Designs variant includes mounts for three Baja Designs LP6 round lights at center and cube light mounts on each wing.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Profile Protection Without the Weight Penalty\u003c\/h2\u003e\n\u003cp\u003eThe Bomber's plate steel construction keeps the bumper sitting as close to flush with the truck as possible, preserving the Raptor's aggressive factory stance rather than adding bulk. The 3\/16-inch aluminum skid plate contributes to a total weight that comes in under the OEM front bumper. On a truck where unsprung and front-axle weight directly affect high-speed desert running and approach angles on technical terrain, a genuine weight reduction at this level of steel construction is worth noting. Buyers who have weighed aftermarket bumpers against stock know how rare that is.\u003c\/p\u003e\n\n\u003ch2\u003eOEM Features Retained, Not Sacrificed\u003c\/h2\u003e\n\u003cp\u003eThe Bomber is engineered to retain the Raptor's factory parking sensors and OEM tow hooks, so the truck's driver-assist systems and recovery capability carry over without modification. A shutter motor bracket is included with the bumper. Trucks equipped with adaptive cruise control require an Adaptive Cruise Control Relocation Bracket (sold separately) to maintain full ACC function after installation.\u003c\/p\u003e\n\n\u003ch2\u003eLighting Ready at Center and on the Wings\u003c\/h2\u003e\n\u003cp\u003eThis Baja Designs variant of the Bomber provides three LP6 round light mounts at the center of the bumper for high-output forward lighting, plus cube light mounts behind each side panel for supplemental coverage. Lights are not included. The Bomber is also compatible with the Addictive Desert Designs Raptor Intercooler Kit (IC1650KIT, sold separately) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA, sold separately); 2024 and later Raptor models installing the intercooler upgrade additionally require a Shutter Motor Relocation Kit (sold separately).\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePlate steel construction:\u003c\/strong\u003e modern low-profile design sized to sit close to flush with the truck body\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3\/16-inch aluminum skid plate:\u003c\/strong\u003e full-width coverage; contributes to a total weight below the OEM front bumper\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBaja Designs LP6 light mounts:\u003c\/strong\u003e three center mounts sized for BD LP6 round lights\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWing cube light mounts:\u003c\/strong\u003e one mount behind each side panel for supplemental lighting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOEM retention:\u003c\/strong\u003e factory parking sensors and tow hooks remain in place\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFully bolt-on, Made in America:\u003c\/strong\u003e no cutting or drilling required; manufactured in Chandler, Arizona\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth\u003eSpecification\u003c\/th\u003e\n      \u003cth\u003eDetail\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eFitment\u003c\/td\u003e\n      \u003ctd\u003e2021–2026 Ford F-150 Raptor and Raptor R\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePrimary material\u003c\/td\u003e\n      \u003ctd\u003ePlate steel with lightweight aluminum panels\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSkid plate\u003c\/td\u003e\n      \u003ctd\u003e3\/16-inch aluminum, full-width\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eMain body finish\u003c\/td\u003e\n      \u003ctd\u003eHammer black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePanel finish\u003c\/td\u003e\n      \u003ctd\u003eSatin black powder coat\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eWeight\u003c\/td\u003e\n      \u003ctd\u003eApprox. 190 lb; lighter than the OEM front bumper\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLighting mounts (this variant)\u003c\/td\u003e\n      \u003ctd\u003e3 × Baja Designs LP6 center mounts; cube light mounts on each wing\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOEM features retained\u003c\/td\u003e\n      \u003ctd\u003eParking sensors, tow hooks\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eHardware included\u003c\/td\u003e\n      \u003ctd\u003eShutter motor bracket\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eInstallation\u003c\/td\u003e\n      \u003ctd\u003eFully bolt-on; no cutting or drilling\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOrigin\u003c\/td\u003e\n      \u003ctd\u003eMade in USA (Chandler, Arizona)\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSKU\u003c\/td\u003e\n      \u003ctd\u003eF210014100103\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003eWARNING (California Proposition 65): This product can expose you to chemicals including crystalline silica, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.\u003c\/p\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Addictive Desert Designs Bomber Front Bumper suits 2021–2026 Ford F-150 Raptor and Raptor R owners who want a bolt-on steel front bumper that reduces weight versus the factory unit, retains OEM parking sensors and tow hooks, and provides dedicated Baja Designs LP6 and cube light mounting positions for high-output trail or desert lighting.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Bomber Front Bumper does not fit any Ford F-150 outside the Raptor and Raptor R variants, nor does it fit earlier or later Raptor generations beyond the 2021–2026 model years. Lights, the Adaptive Cruise Control Relocation Bracket, the Intercooler Kit, the Heat Exchanger Kit, and any Shutter Motor Relocation Kit are not included and must be purchased separately. ACC-equipped trucks require the ACC Relocation Bracket to retain adaptive cruise control function.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this bumper fit both the standard F-150 Raptor and the Raptor R?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Addictive Desert Designs Bomber Front Bumper is designed for the 2021–2026 Ford F-150 Raptor and Raptor R. It does not fit standard F-150 trims or earlier Raptor generations. Buyers should confirm their model year falls within the 2021–2026 range before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs any cutting or drilling required to install this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Bomber Front Bumper is fully bolt-on and requires no cutting or drilling for installation on the 2021–2026 Ford F-150 Raptor and Raptor R. A shutter motor bracket is included. Trucks with adaptive cruise control will need an Adaptive Cruise Control Relocation Bracket, sold separately, to retain full ACC function.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill my factory parking sensors and tow hooks still work after installing this bumper?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Addictive Desert Designs Bomber Front Bumper is engineered to retain the Raptor's OEM parking sensors and factory tow hooks. No sensor relocation or tow hook modification is required on sensor-equipped models.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lights come with the bumper, and what mounts does it include?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo lights are included with the Bomber Front Bumper. This Baja Designs variant provides three center mounts sized for Baja Designs LP6 round lights and one cube light mount behind each side wing panel. Lights must be purchased separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Bomber compatible with the Raptor's intercooler or heat exchanger upgrades?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Bomber Front Bumper is compatible with the Addictive Desert Designs Raptor Intercooler Kit (IC1650KIT) and the Raptor R High Mount Heat Exchanger Kit (AC21112301NA), both sold separately. On 2024 and later Raptor models, installing the intercooler upgrade also requires a Shutter Motor Relocation Kit, sold separately.\u003c\/p\u003e","brand":"Addictive Desert Designs","offers":[{"title":"Default Title","offer_id":50630379143238,"sku":"F210014100103","price":2598.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/2021-Raptor-Front-Bumper_aa852f6d-27f0-4eb5-b09f-02afe85bf67-sq.jpg?v=1791954422","url":"https:\/\/terrainvault.com\/products\/addictive-desert-designs-bomber-front-bumper-for-ford-f-150-raptor-and","provider":"TerrainVault","version":"1.0","type":"link"}