{"title":"Renogy","description":"\u003cp\u003eRenogy off-grid electrical gear: solar panels, LiFePO4 and AGM house batteries, charge controllers, inverters, DC-DC chargers, and the cables and fuses that tie a system together.\u003c\/p\u003e","products":[{"product_id":"renogy-solar-connector-waterproof-inline-fuse-holder","title":"Renogy Solar Connector Waterproof Inline Fuse Holder","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Connector Waterproof Inline Fuse Holder is a single-circuit overcurrent protection accessory for solar power arrays, placing an inline fuse directly in the solar connector lead between a panel and the rest of the system. Available in 15A, 20A, and 30A ratings, each holder uses solar connector plugs on both ends for plug-and-play installation without cutting or splicing cable.\u003c\/p\u003e\n\n\u003ch2\u003eOvercurrent Protection Where the Panel Connects\u003c\/h2\u003e\n\u003cp\u003eA fault or short circuit in a solar array can push damaging current back through panel wiring before a downstream fuse or breaker responds. The Renogy Waterproof Inline Fuse Holder places the fuse at the connector level, in the solar lead itself, so the panel circuit is protected at the point closest to the source. Choosing the correct amp rating for the panel or string keeps the fuse sized to the wire, not just the load downstream.\u003c\/p\u003e\n\n\u003ch2\u003eIP67 Waterproof Housing for Outdoor Installation\u003c\/h2\u003e\n\u003cp\u003eThe fuse holder carries an IP67 degree of protection rating, meaning it is sealed against dust and against submersion. For rooftop, roof-rack, or trailer-mounted panels exposed to rain, wash-down, and road spray, a sealed holder prevents moisture from reaching the fuse contacts. The PPO insulation body and copper silver-plated contacts are rated for a temperature range of -40 to +125°C, covering both cold-weather storage and high-heat roof installations.\u003c\/p\u003e\n\n\u003ch2\u003eAuto-Lock Solar Connector Interface\u003c\/h2\u003e\n\u003cp\u003eBoth ends of the Renogy Inline Fuse Holder terminate in solar connectors with an auto-lock inner-knob mechanism. The male and female points lock on insertion and release intentionally, which prevents accidental disconnection under vibration. The holder is compatible with PV cables of different insulation diameters, and the fuse is replaceable, so the holder does not need to be discarded when a fuse blows.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSolar connector on each end:\u003c\/strong\u003e plug-and-play installation in any solar connector lead without splicing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 waterproof protection:\u003c\/strong\u003e sealed housing rated for outdoor and rooftop exposure\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAuto-lock connector mechanism:\u003c\/strong\u003e inner-knob locking prevents accidental disconnection\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eReplaceable fuse:\u003c\/strong\u003e fuse can be swapped without replacing the holder\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePPO insulation body:\u003c\/strong\u003e rated -40 to +125°C, flame class UL94-V0\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide DC voltage rating:\u003c\/strong\u003e rated to 1000 V DC, suitable for a range of DC solar applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e15A\u003c\/th\u003e\n \u003cth\u003e20A\u003c\/th\u003e\n \u003cth\u003e30A\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e15A\u003c\/td\u003e\n \u003ctd\u003e20A\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Voltage\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e1000 V DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTest Voltage\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e6000V (50Hz, 1 min)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOvervoltage Category\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eCATIII\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDegree of Protection\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eIP2*\/IP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSafety Class\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eII\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFlame Class\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eUL94-V0\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Material\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eCopper, Silver Plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Resistance\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e1mΩ\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003ePPO\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Range\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e-40 to +125°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsertion \/ Withdrawal Force\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e≤50N \/ ≥50N\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSuitable Connector\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eSolar Connector\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFuse\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eReplaceable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Connector Waterproof Inline Fuse Holder suits solar system builders adding overcurrent protection at the panel lead level, including overlanders, van builders, RV owners, and off-grid cabin installers running solar panels with solar connector terminations. The IP67 housing makes it appropriate for exposed outdoor installations where moisture is a regular concern.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis fuse holder is designed for solar connector leads only and is not a general-purpose inline fuse holder for other connector types. It does not include mounting hardware for securing the holder body to a surface. Compatible cable gauge range is not specified beyond PV cables with different insulation diameters.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the fuse holder come with the fuse installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector Waterproof Inline Fuse Holder is sold with the fuse included, embedded in the waterproof holder at the rated amperage selected (15A, 20A, or 30A). The fuse is also replaceable, so the holder can be reused after a fuse blows.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich amp rating should I choose for my solar panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe correct amp rating for this inline fuse holder depends on the short-circuit current (Isc) of the solar panel or string it protects and the wire gauge used in that circuit. No selection formula is specified for this fuse holder; consult the panel's datasheet and applicable wiring standards for the correct fuse size for your installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this holder compatible with standard solar connectors from other brands?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Inline Fuse Holder uses solar connector terminations on both ends and is compatible with PV cables of different insulation diameters. Compatibility with specific third-party solar connector brands is not stated beyond the solar connector standard.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this fuse holder be used outdoors or in a rooftop installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector Waterproof Inline Fuse Holder carries an IP67 degree of protection rating and a temperature range of -40 to +125°C, making it suitable for outdoor and rooftop solar installations exposed to rain, dust, and temperature extremes.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"20 Amp","offer_id":50655854100550,"sku":"RNG-CNCT-FUSE20-G1-US","price":17.99,"currency_code":"USD","in_stock":true},{"title":"15 Amp","offer_id":50655854133318,"sku":"RNG-CNCT-FUSE15-G1-US","price":16.99,"currency_code":"USD","in_stock":true},{"title":"30 Amp","offer_id":50655854166086,"sku":"RNG-CNCT-FUSE30-G1-US","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/e143b3ec91c5a0e05ddc90eaa397645024be1db827b900cba58965ba188a.jpg?v=1792208144"},{"product_id":"renogy-rego-12v-60a-mppt-solar-charge-controller","title":"Renogy REGO 12V 60A MPPT Solar Charge Controller","description":"\u003cp class=\"product-lead\"\u003eThe Renogy REGO 12V 60A MPPT Solar Charge Controller manages solar input for 12V off-grid systems, accepting up to 800W from panels with an open-circuit voltage up to 100V and delivering up to 60A of charge current to the battery. MPPT tracking efficiency reaches 99%, and the integrated Battery Protect Unit (BPU) guards both the solar input and battery output terminals against the most common failure modes. The controller is available without a battery cable, with a 5FT 6AWG Anderson adapter cable, or with a 10FT 6AWG Anderson adapter cable.\u003c\/p\u003e\n\n\u003ch2\u003eAnderson Connections Cut Installation Time\u003c\/h2\u003e\n\u003cp\u003eThe Renogy REGO charge controller uses Anderson PP75 terminals on both the solar and battery connections. An included Anderson-to-MC4 solar adapter cable lets the controller connect directly to standard MC4 panel connectors without additional adapters. Renogy states this plug-and-play approach reduces installation time by up to 60% compared with controllers that use bare-wire screw terminals. The compact die-cast aluminum enclosure also takes up less wall or cabinet space than many 60A controllers, which matters in tight van builds or trailer compartments where every inch counts.\u003c\/p\u003e\n\n\u003ch2\u003eMulti-Stage Charging Protects Battery Health\u003c\/h2\u003e\n\u003cp\u003eThe REGO controller applies a three- to four-stage charging sequence (Bulk, Boost, Float, and Equalization) for lead-acid battery types, and a two-stage sequence for lithium batteries. Matching the charge profile to the battery chemistry reduces stress on the cells and extends service life over years of daily cycling. The integrated BPU monitors battery state and disconnects non-essential loads before the battery reaches full discharge or drops below the threshold needed to start an engine, preventing the deep-discharge events that shorten battery life most quickly.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt-In Bluetooth and Real-Time Temperature Compensation\u003c\/h2\u003e\n\u003cp\u003eBuilt-in Bluetooth connects the REGO controller to the Renogy DC Home App on a smartphone, where charge parameters (including boost voltage, float voltage, and duration) can be read and adjusted without opening the enclosure. A built-in temperature sensor measures battery temperature continuously and applies automatic compensation of -3mV\/°C\/2V for non-lithium batteries, keeping charge voltage accurate across the -20°C to 60°C operating range. Lithium battery profiles receive no compensation, which is the correct behavior for LFP chemistry.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e99% MPPT Tracking Efficiency:\u003c\/strong\u003e maximizes energy harvest from connected solar panels up to 800W \/ 100V VOC\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAnderson PP75 Terminals:\u003c\/strong\u003e plug-and-play connections on solar and battery sides; Anderson-to-MC4 solar adapter cable included\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBattery Protect Unit (BPU):\u003c\/strong\u003e disconnects non-essential loads before full discharge or insufficient engine-start voltage\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFive Battery Type Profiles:\u003c\/strong\u003e AGM\/Sealed, GEL, Flooded, LFP, and USER (custom parameters via app)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-In Bluetooth:\u003c\/strong\u003e monitor and adjust charge parameters via the Renogy DC Home App\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Heat Sink:\u003c\/strong\u003e passive thermal management for stable continuous charging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eParameter\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eNominal System Voltage\u003c\/td\u003e\n \u003ctd\u003e12V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Charge Current\u003c\/td\u003e\n \u003ctd\u003e60A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax PV Input Power\u003c\/td\u003e\n \u003ctd\u003e800W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMPPT Voltage Range\u003c\/td\u003e\n \u003ctd\u003e15–100 VDC \/ 12V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSolar Input Voltage Range (VOC)\u003c\/td\u003e\n \u003ctd\u003e100V max\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Input Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e50A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Limiting Protection\u003c\/td\u003e\n \u003ctd\u003eUp to 800W \/ 12V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Operating Range\u003c\/td\u003e\n \u003ctd\u003e10–16V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSelf-Consumption\u003c\/td\u003e\n \u003ctd\u003e≤0.5W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eGround Type\u003c\/td\u003e\n \u003ctd\u003eCommon Negative Lug\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible Battery Types\u003c\/td\u003e\n \u003ctd\u003eAGM\/Sealed, GEL, Flooded, LFP, USER\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Size\u003c\/td\u003e\n \u003ctd\u003eAnderson PP75\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e9.43 x 7.36 x 4.28 in \/ 239.4 x 187 x 108.8 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight (controller only)\u003c\/td\u003e\n \u003ctd\u003e5.07 lbs \/ 2.30 kg\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-20°C to 60°C \/ -4°F to 140°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-25°C to 65°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating \/ Storage Humidity\u003c\/td\u003e\n \u003ctd\u003e0%–90% RH\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Compensation\u003c\/td\u003e\n \u003ctd\u003e-3mV\/°C\/2V (non-lithium); no compensation (lithium)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eElectronic Protections\u003c\/td\u003e\n \u003ctd\u003eBattery overcharging, over-discharge, battery reverse polarity, PV reverse polarity, PV reverse flow, PV short-circuit, internal over-temperature, charging over-current\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eCE, RoHS, FCC Class B Part 15\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e5 years\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded (all variants)\u003c\/td\u003e\n \u003ctd\u003eController, temperature sensor, Anderson-to-MC4 solar adapter cable, 4x mounting screws\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded (5FT cable variant)\u003c\/td\u003e\n \u003ctd\u003e+ 5FT 6AWG Anderson adapter cable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded (10FT cable variant)\u003c\/td\u003e\n \u003ctd\u003e+ 10FT 6AWG Anderson adapter cable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy REGO 60A MPPT controller suits overlanders, van builders, RV owners, and cabin or marine installations running a 12V house battery bank. The controller is a good fit for builders who want plug-and-play Anderson connections, built-in Bluetooth monitoring, and multi-chemistry battery support in a compact enclosure.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe REGO controller is not compatible with 24V battery systems. Connecting the controller to a non-REGO house battery requires an Anderson-to-Ring terminal cable that is not included and must be purchased separately. The controller has no built-in display; all data monitoring requires a paired smartphone running the Renogy DC Home App or a separately purchased wired communication module.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the REGO controller have a display screen?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy REGO 60A MPPT controller has no built-in display. System data (including solar power generation, charge state, and voltage parameters) is accessible through the Renogy DC Home App on a paired smartphone via the controller's built-in Bluetooth. A wired connection to a compatible Renogy Super Panel is also supported for monitoring without a phone.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this controller compatible with 24V battery banks?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy REGO 60A MPPT controller is designed for 12V battery systems only. Compatible battery chemistries at 12V include Sealed Lead Acid, AGM, Flooded, Gel, and Lithium (LFP). A 24V battery bank is not supported by this controller.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much solar can be connected to this controller?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy REGO 60A MPPT controller accepts a maximum solar input of 800W with an open-circuit voltage (VOC) up to 100V and a maximum short-circuit current (Isc) of 50A. Panels should be matched in similar configurations and must not exceed these input limits.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the USER battery type setting?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe USER battery type on the Renogy REGO controller allows custom charge voltage parameters to be programmed via the Renogy DC Home App. When the battery selector is set to USER mode, boost voltage, float voltage, and duration values can be set manually via the app, making this option suited to advanced DIY system builders with non-standard battery configurations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre there any installation requirements to be aware of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy REGO 60A MPPT controller must be mounted vertically with at least 150mm of clearance around the unit for proper heat dissipation from the die-cast aluminum heat sink. During wiring, the battery connection must be made before the solar panels are connected.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"None","offer_id":50655882281030,"sku":"RCC60REGO-G2-US","price":469.99,"currency_code":"USD","in_stock":true},{"title":"10FT 6AWG Cable","offer_id":50655882313798,"sku":"RCBREGO60-1006PR-US","price":617.99,"currency_code":"USD","in_stock":true},{"title":"5FT 6AWG Cable","offer_id":50655882346566,"sku":"RCBREGO60-0506PR-US","price":617.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/59838_source_1702888539.jpg?v=1792208193"},{"product_id":"renogy-flex-shadowflux-anti-shading-n-type-flexible-solar-panel","title":"Renogy Flex ShadowFlux Anti-Shading N-Type Flexible Solar Panel","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Flex ShadowFlux is a flexible N-Type TOPCon solar panel built for curved surfaces and real-world shading conditions, available in 100W and 200W variants. Its anti-shading technology uses 30 high-density bypass diodes to route power around shaded cells, helping maintain usable output when trees, rigging, antennas, or snow partially cover the panel. At 0.10 in thick and 4.19 lb (100W), the panel bends up to 270° vertically to conform to RV roofs, boat hulls, teardrop trailers, and other arched surfaces.\u003c\/p\u003e\n\n\u003ch2\u003eAnti-Shading Technology That Works in the Real World\u003c\/h2\u003e\n\u003cp\u003eConventional flexible panels can lose a disproportionate share of their output when even one cell falls into shadow. The Flex ShadowFlux addresses this with 30 high-density bypass diodes distributed across the cell array, allowing current to route around shaded cells rather than stalling at them. In laboratory testing under simulated partial-shading conditions, the 200W panel maintained up to 85% of rated output; actual results vary with installation and environment. The anti-shading architecture is designed to keep charging going through tree shadows, mast shadows, scattered cloud cover, and point obstructions such as bird droppings or leaf litter. For best results, Renogy recommends keeping more than half the panel surface in direct sunlight.\u003c\/p\u003e\n\n\u003ch2\u003eLightweight and Flexible Enough to Go Where Rigid Panels Cannot\u003c\/h2\u003e\n\u003cp\u003eThe Flex ShadowFlux bends up to 270° vertically along its long axis, allowing it to follow the curve of an RV roof, a boat hull, or a teardrop trailer shell without requiring a flat mounting surface. Horizontal bending is intentionally limited to protect the internal cell structure and prevent micro-cracks. At 0.10 in (2.5mm) thick and 4.19 lb for the 100W variant, the panel adds minimal weight and profile to any surface it mounts on. Adhesive mounting is possible without drilling; Renogy also notes that mounting to a roof rack platform rather than directly to a painted surface keeps adhesive off the vehicle finish.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Repeated Flexing and Long-Term Outdoor Exposure\u003c\/h2\u003e\n\u003cp\u003eThe TPO surface layer resists UV-related yellowing and moisture ingress more effectively than ETFE, with higher tensile strength to handle vibration and mechanical stress during travel. Dual glass-fiber reinforcement inside the panel body further reduces the risk of cell micro-cracks from repeated bending or surface deformation, a common cause of long-term power degradation in flexible panels. IP68-rated protection guards against water and dust intrusion, and the panel is rated to withstand up to 5,400Pa of snow load and up to 2,400Pa of wind load.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eShadowFlux anti-shading technology:\u003c\/strong\u003e 30 high-density bypass diodes minimize power loss from partial shading by trees, antennas, rigging, snow, and point obstructions\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eA+ grade 18BB N-Type TOPCon cells:\u003c\/strong\u003e up to 25% conversion efficiency with reduced micro-crack risk compared to standard cell designs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e270° vertical flexibility:\u003c\/strong\u003e conforms to curved RV roofs, boat hulls, and arched trailer surfaces; horizontal bending intentionally limited\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP68-rated protection:\u003c\/strong\u003e resists water and dust intrusion; rated for up to 5,400Pa snow load and 2,400Pa wind load\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTPO surface with dual glass-fiber reinforcement:\u003c\/strong\u003e resists UV aging, delamination, and vibration-induced micro-cracks over repeated bending cycles\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUltra-thin all-black profile:\u003c\/strong\u003e 0.10 in (2.5mm) thick; low visual profile on any mounting surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e100W\u003c\/th\u003e\n \u003cth\u003e200W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Type\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eA+ Grade 18BB N-Type TOPCon\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eEfficiency\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eUp to 25%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBypass Diodes\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003e30\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePanel Voltage\u003c\/td\u003e\n \u003ctd\u003e33.6V\u003c\/td\u003e\n \u003ctd\u003e44.1V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n \u003ctd\u003e12V, 24V\u003c\/td\u003e\n \u003ctd\u003e12V, 24V, 36V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e37.09 x 24.13 x 0.10 in (942 x 613 x 2.5mm)\u003c\/td\u003e\n \u003ctd\u003e62.20 x 27.40 x 0.10 in (1580 x 696 x 2.5mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e4.19 lb\u003c\/td\u003e\n \u003ctd\u003e7.72 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFlexibility\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eUp to 270° vertically (along long axis); horizontal bending intentionally limited\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSurface Material\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eTPO with dual glass-fiber reinforcement\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eIP68\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSnow Load Rating\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eUp to 5,400Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWind Load Rating\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eUp to 2,400Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRSP100DB-ASR-B-G1-US\u003c\/td\u003e\n \u003ctd\u003eRSP200DB-ASR-B-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Flex ShadowFlux suits overlanders, RV owners, boaters, and teardrop trailer builders who need a lightweight, flexible panel that conforms to a curved mounting surface and continues generating power when partial shading from trees, rigging, or other obstructions is unavoidable. The 100W variant works with 12V and 24V systems; the 200W variant adds 36V compatibility.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe panel is not designed for horizontal bending, which is intentionally limited to protect the internal cell structure. It is not a rigid panel and is not suited to flat, framed installations where a rigid module would be the standard choice. Connector type and cable specifications are not stated in available product data; verify compatibility with your charge controller before purchase.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does the anti-shading technology work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flex ShadowFlux uses 30 high-density bypass diodes distributed across its cell array. When part of the panel falls into shadow, these diodes allow current to route around the affected cells rather than stalling at them. In laboratory testing under simulated partial-shading conditions, the 200W panel maintained up to 85% of rated output; actual results vary with installation and environment. Renogy recommends keeping more than half the panel surface in direct sunlight for best performance.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat kinds of shading does this panel handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flex ShadowFlux's cell interconnection design is intended to reduce power loss from small point shadows such as bird droppings, leaf litter, and mud; linear shadows from antenna wires, boat rigging, and power lines; partial and patchy shadows from chimney or vent shadows and scattered tree branches; and dynamic shadows from moving clouds or shifting objects. Keeping more than half the panel in direct sunlight allows the anti-shading architecture to provide the greatest advantage.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow flexible is the panel, and in which direction can it bend?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flex ShadowFlux bends up to 270° vertically along its long axis, which allows it to follow the curve of an RV roof, a boat hull, or a teardrop trailer shell. Horizontal bending is intentionally limited to protect the internal cell structure and prevent micro-cracks. Bending the panel horizontally beyond its designed range risks long-term damage to the cells and is not supported.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich system voltages are compatible with each wattage?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 100W Flex ShadowFlux has a panel voltage of 33.6V and is compatible with 12V and 24V off-grid solar systems. The 200W variant has a panel voltage of 44.1V and is compatible with 12V, 24V, and 36V systems. Renogy recommends pairing either panel with an MPPT charge controller for effective energy harvesting.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy does the Flex ShadowFlux use TPO instead of ETFE?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eCompared with ETFE, TPO offers greater moisture resistance and flexibility, which helps reduce the risk of delamination and cell micro-cracks during repeated bending and prolonged outdoor use. TPO's higher tensile strength also helps the Flex ShadowFlux withstand vibration and mechanical stress. Its built-in UV absorption capability resists yellowing and long-term outdoor aging under intense sunlight and temperature swings.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Flex ShadowFlux be mounted without drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Flex ShadowFlux supports drill-free installation. Renogy suggests two approaches for vehicle mounting: applying a compatible paint protection film or removable vinyl layer before adhesive mounting to keep adhesive off the painted surface, or attaching the panel to a roof rack platform rather than directly to the vehicle roof. Neither approach requires drilling into the roof surface.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"200W","offer_id":50655893585990,"sku":"RSP200DB-ASR-B-G1-US","price":299.99,"currency_code":"USD","in_stock":true},{"title":"100W","offer_id":50655893618758,"sku":"RSP100DB-ASR-B-G1-US","price":172.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/200W_dd6cae17-d1ce-449c-a2c3-1aa392c2db58.jpg?v=1792208227"},{"product_id":"renogy-12v-deep-cycle-agm-battery","title":"Renogy 12V Deep Cycle AGM Battery","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 12V Deep Cycle AGM Battery is a sealed, maintenance-free lead-acid house battery for off-grid solar systems, RVs, overlanding rigs, vans, and cabins. Absorbent Glass Mat technology absorbs the electrolyte into a fiberglass mat separator, eliminating free-flowing acid and making the battery spill-proof with no routine maintenance required. The 200Ah variant delivers a rated capacity of 200Ah (20-hour rate to 10.5V) and a maximum discharge current of 2000A for 5 seconds. The 100Ah and 70Ah Start-Stop variants are also available; specifications for those sizes are not published for this listing.\u003c\/p\u003e\n\n\u003ch2\u003eSealed Design Means No Routine Maintenance\u003c\/h2\u003e\n\u003cp\u003eThe AGM battery's integrated sealed construction keeps the electrolyte locked in the fiberglass mat at all times. There is no water to top off, no acid to check, and no venting system to inspect on a schedule. For a solar beginner wiring a first off-grid system, or an overlander who wants a house battery that stays reliable between trips without active upkeep, that sealed design removes an entire category of recurring tasks.\u003c\/p\u003e\n\n\u003ch2\u003eWide Discharge Temperature Range\u003c\/h2\u003e\n\u003cp\u003eThe upgraded electrolyte formula in the Renogy AGM battery supports discharge from -4 to 140°F \/ -20 to 60°C. That range covers cold-weather camping and desert heat without requiring external temperature compensation hardware. The charge temperature range is narrower, at 32 to 122°F \/ 0 to 50°C, so charging below freezing is not supported; plan charging accordingly in winter conditions.\u003c\/p\u003e\n\n\u003ch2\u003eExpandable Bank Configuration\u003c\/h2\u003e\n\u003cp\u003eUp to four Renogy AGM batteries of the same voltage, capacity, and type can be connected in parallel to increase total amp-hour capacity. Series connections carry no stated limitation, making it straightforward to build a 24V or higher system. When connecting multiple batteries in any configuration, Renogy recommends using a battery balancer to extend service life. All batteries in a bank must be the same type (AGM), voltage, and capacity: mixing capacities or chemistries is not supported.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAGM sealed construction:\u003c\/strong\u003e spill-proof, maintenance-free, no free-flowing electrolyte\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide discharge temperature range:\u003c\/strong\u003e -4 to 140°F \/ -20 to 60°C\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh peak discharge current:\u003c\/strong\u003e 2000A for 5 seconds to start high-draw appliances\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eExpandable bank:\u003c\/strong\u003e up to 4P parallel, unlimited series connections\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLow self-discharge:\u003c\/strong\u003e less than 3% per month at 77°F \/ 25°C\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eABS housing:\u003c\/strong\u003e impact-resistant outer case\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e200Ah\u003c\/th\u003e\n \u003cth\u003e100Ah\u003c\/th\u003e\n \u003cth\u003e70Ah Start-Stop\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Type\u003c\/td\u003e\n \u003ctd\u003eAGM\u003c\/td\u003e\n \u003ctd\u003eAGM\u003c\/td\u003e\n \u003ctd\u003eAGM\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage\u003c\/td\u003e\n \u003ctd\u003e12V\u003c\/td\u003e\n \u003ctd\u003e12V\u003c\/td\u003e\n \u003ctd\u003e12V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Capacity\u003c\/td\u003e\n \u003ctd\u003e200Ah (20-hour rate to 10.5V)\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCycle Life\u003c\/td\u003e\n \u003ctd\u003e500 cycles at 50% DOD\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e20.6 x 9.4 x 8.8 in \/ 522 x 240 x 224 mm\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e127.9 lbs \/ 58 kg\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHousing Material\u003c\/td\u003e\n \u003ctd\u003eABS\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Continuous Charging Current\u003c\/td\u003e\n \u003ctd\u003e60A\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Discharge Current\u003c\/td\u003e\n \u003ctd\u003e2000A (5 seconds)\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCycle Use Voltage\u003c\/td\u003e\n \u003ctd\u003e14.4V–14.8V\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFloat Charge Voltage\u003c\/td\u003e\n \u003ctd\u003e13.6V–13.8V\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSelf-Discharge Rate\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;3% \/ month at 77°F \/ 25°C\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDischarge Temperature\u003c\/td\u003e\n \u003ctd\u003e-4 to 140°F \/ -20 to 60°C\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharge Temperature\u003c\/td\u003e\n \u003ctd\u003e32 to 122°F \/ 0 to 50°C\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-4 to 140°F \/ -20 to 60°C\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eParallel Connection\u003c\/td\u003e\n \u003ctd\u003eUp to 4\u003c\/td\u003e\n \u003ctd\u003eUp to 4\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSeries Connection\u003c\/td\u003e\n \u003ctd\u003eNo stated limitation\u003c\/td\u003e\n \u003ctd\u003eNo stated limitation\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded Hardware\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003ctd\u003e\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRNG-BATT-AGM12-200-G3-US\u003c\/td\u003e\n \u003ctd\u003eRNG-BATT-AGM12-100-G2-US\u003c\/td\u003e\n \u003ctd\u003eRBT1270AGM-ST-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 12V Deep Cycle AGM battery suits off-grid solar builds, RV house banks, overlanding and van electrical systems, and cabin backup power where a sealed, maintenance-free lead-acid battery is preferred over lithium. The wide discharge temperature range makes it workable in cold-weather and high-heat environments where charging infrastructure allows for the 32°F \/ 0°C minimum charge temperature.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis battery does not support charging below 32°F \/ 0°C. It does not include a self-heating function. Mixing it in a bank with batteries of a different capacity, voltage, or chemistry is not supported. The 500A Battery Monitor is sold separately and is not included. Detailed specifications for the 100Ah and 70Ah Start-Stop variants are not published for this listing.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is an AGM battery and how does it differ from a flooded lead-acid battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAn AGM (Absorbent Glass Mat) battery holds its electrolyte, a mixture of water and sulfuric acid, absorbed into a fiberglass mat separator rather than as free-flowing liquid. The Renogy 12V AGM battery's sealed design means no water topping, no acid spills, and no venting requirements that a traditional flooded battery would demand.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow deeply can the AGM battery be discharged without shortening its life?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRenogy recommends not discharging the AGM battery below 50% state of charge to avoid reducing cycle life. The 200Ah variant is rated for 500 cycles at 50% depth of discharge. Discharging to 0% and recharging is possible but will shorten the total number of usable cycles.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the AGM battery be charged in freezing temperatures?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy AGM battery's discharge temperature range extends down to -4°F \/ -20°C, but the charge temperature range starts at 32°F \/ 0°C. Charging the battery below freezing is outside the supported range and will shorten its lifespan. The battery does not include a self-heating function.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many AGM batteries can be connected together, and in what configurations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eUp to four Renogy AGM batteries can be connected in parallel to increase total amp-hour capacity. Series connections carry no stated limitation, making 24V and higher systems possible. All batteries in a bank must share the same type (AGM), voltage, and capacity; connecting a 100Ah and a 200Ah battery together is not supported.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat charge controller battery type setting should be used with this battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWhen configuring a charge controller to work with the Renogy AGM battery, select the SLD (sealed lead-acid) battery type setting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the correct installation orientation for the AGM battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy AGM battery should be installed upright. Side installation is permitted only when there is a specific reason that prevents upright placement. The battery must never be installed upside down. When mounting, leave 1.97 to 3.94 in (5 to 10 cm) of clearance above the top and at least 7.87 in (20 cm) of clearance on the busbar side.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"200Ah","offer_id":50656000999494,"sku":"RNG-BATT-AGM12-200-G3-US","price":395.99,"currency_code":"USD","in_stock":true},{"title":"100Ah","offer_id":50656001032262,"sku":"RNG-BATT-AGM12-100-G2-US","price":208.99,"currency_code":"USD","in_stock":true},{"title":"70Ah Start-Stop","offer_id":50656001065030,"sku":"RBT1270AGM-ST-G1-US","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01_1__06904.1750404959.1280.1280.jpg?v=1792208361"},{"product_id":"renogy-pro-12v-pure-sine-wave-inverter-with-bluetooth","title":"Renogy Pro 12V Pure Sine Wave Inverter with Bluetooth","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Pro 12V Pure Sine Wave Inverter converts 12V DC battery power to 120V AC household power with 92% efficiency and built-in Bluetooth monitoring, available in 1000W, 2000W, and 3000W continuous output ratings. Each size delivers a clean sine wave with total harmonic distortion under 4%, making it suitable for sensitive electronics including CPAP machines, laptops, and variable-speed motor loads. Select the wattage that matches your continuous load requirements; all three variants share the same core feature set.\u003c\/p\u003e\n\n\u003ch2\u003eLess Idle Draw, More Usable Power\u003c\/h2\u003e\n\u003cp\u003eThe Pro series draws less than 9.6W at idle, so battery capacity is not quietly drained while the inverter waits for a load. For an overlander or van dweller running a battery bank through the night, that reduced standby draw translates directly into more amp-hours available for the refrigerator, lights, or CPAP. The 92% DC-to-AC conversion efficiency carries the same logic: less energy lost as heat during conversion means more of what the battery holds actually reaches the appliance.\u003c\/p\u003e\n\n\u003ch2\u003eGrid-Quality Output for Sensitive Devices\u003c\/h2\u003e\n\u003cp\u003ePure sine wave output with THD under 4% means the AC waveform closely matches what comes from a household wall outlet. Devices sensitive to power quality, including variable-speed motors, audio equipment, and medical devices, run on this output without the hum, heat, or shortened service life that modified sine wave inverters can cause. Each variant also carries 2x surge capacity: 2000W peak for the 1000W model, 4000W for the 2000W, and 6000W for the 3000W (each at 150ms), handling the brief high-current draw that motors and compressors produce at startup.\u003c\/p\u003e\n\n\u003ch2\u003eHardwire or Plug In: Both Output Options Are Built In\u003c\/h2\u003e\n\u003cp\u003eGFCI-protected AC sockets handle standard plug-in loads with the same ground-fault protection found in household outlets. The rotatable DIY AC terminal block lets the inverter be hardwired directly into a travel trailer's electrical panel or a van's distribution bus, delivering full-rated continuous power to every outlet on that panel rather than being limited to what a single socket can carry. An 18W USB port adds a direct charging path for phones and small devices without occupying an AC socket. Built-in Bluetooth connects to the Renogy App for real-time power monitoring and remote on\/off switching from a phone; no separate module is required. A remote control and RJ12 cable are included in the 3000W package for wired remote switching as well.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e92% Conversion Efficiency:\u003c\/strong\u003e up to 13% more usable battery power compared to less efficient inverters\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePure Sine Wave Output Under 4% THD:\u003c\/strong\u003e clean 120VAC ±3% at 50 or 60Hz (configurable) for sensitive electronics and motor loads\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e2x Surge Capacity:\u003c\/strong\u003e 2000W \/ 4000W \/ 6000W peak at 150ms for the 1000W \/ 2000W \/ 3000W models\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-In Bluetooth:\u003c\/strong\u003e real-time monitoring and remote on\/off via the Renogy App, no add-on module needed\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGFCI-Protected AC Sockets and DIY Terminal Block:\u003c\/strong\u003e plug-in and hardwire outputs on the same unit\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-Chemistry Battery Compatibility:\u003c\/strong\u003e works with AGM, GEL, flooded, and lithium 12V battery banks\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e1000W\u003c\/th\u003e\n \u003cth\u003e2000W\u003c\/th\u003e\n \u003cth\u003e3000W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eNominal Input Voltage\u003c\/td\u003e\n \u003ctd\u003e12VDC\u003c\/td\u003e\n \u003ctd\u003e12VDC\u003c\/td\u003e\n \u003ctd\u003e12VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eNot provided for this variant\u003c\/td\u003e\n \u003ctd\u003e10.5 to 16.8VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContinuous Output Power\u003c\/td\u003e\n \u003ctd\u003e1000W\u003c\/td\u003e\n \u003ctd\u003e2000W\u003c\/td\u003e\n \u003ctd\u003e3000W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePeak Power\u003c\/td\u003e\n \u003ctd\u003e2000W @ 150ms\u003c\/td\u003e\n \u003ctd\u003e4000W @ 150ms\u003c\/td\u003e\n \u003ctd\u003e6000W @ 150ms\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Voltage\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e120VAC ±3%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Waveform\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003ePure Sine Wave\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Frequency\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e50\/60Hz (configurable)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTHD\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e\u0026lt;4%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInverter Efficiency\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e92%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSelf Consumption (Idle)\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e\u0026lt;9.6W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDC Terminal\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eM8\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eAC Output\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eGFCI-Protected AC Socket x2, Rotatable AC Output Terminal Block x1\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eUSB Output\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e18W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Compatibility\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eAGM, GEL, FLD, LI\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCommunication\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eBluetooth (built-in)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRemote On\/Off\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eYes\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e-20°C to 40°C \/ -4°F to 104°F (output power degrades at 40°C \/ 104°F or higher)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e-40°C to 70°C \/ -40°F to 158°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHumidity\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e0% to 95% RH (no condensation)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIngress Protection\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eIP20\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eAltitude\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e2,000m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCooling\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eFans\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eNot provided for this variant\u003c\/td\u003e\n \u003ctd\u003e18.38 x 10.26 x 4.11 in \/ 466.8 x 260.5 x 104.5 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e6.68 lb\u003c\/td\u003e\n \u003ctd\u003e10.71 lb\u003c\/td\u003e\n \u003ctd\u003e11.66 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRIV1210PH-12S-G1-US\u003c\/td\u003e\n \u003ctd\u003eRIV1220PH-12S-G1-US\u003c\/td\u003e\n \u003ctd\u003eRIV1230PH-12S-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Pro 12V Pure Sine Wave Inverter suits overlanders, van dwellers, RV owners, and off-grid cabin or workshop setups running a 12V battery bank who need clean AC power for sensitive electronics, motor loads, or a hardwired electrical panel. The 1000W, 2000W, and 3000W options cover load sizes from a single workstation or CPAP machine up to a full trailer electrical panel.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis inverter converts DC to AC only and does not charge batteries; a separate charger or inverter charger is required for battery recharging. The IP20 rating means the unit is not sealed against dust or water ingress and must be installed in a protected, ventilated enclosure. It accepts 12V DC input only and is not compatible with 24V or 48V battery systems.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this inverter be hardwired into a travel trailer's electrical panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Pro 12V Pure Sine Wave Inverter includes a rotatable DIY AC terminal block that can be hardwired directly to a power strip or electrical panel, delivering full-rated continuous power to every outlet on that panel. This allows more appliances to run simultaneously than the two GFCI-protected AC sockets alone would permit.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the peak surge wattage for each model?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Renogy Pro inverter provides 2x surge capacity at 150ms: the 1000W model peaks at 2000W, the 2000W model peaks at 4000W, and the 3000W model peaks at 6000W. This surge headroom helps start motor-driven appliances such as refrigerators and power tools that draw higher current at startup than during normal operation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this inverter also charge the battery bank?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Pro 12V Pure Sine Wave Inverter converts DC battery power to 120V AC only and does not charge batteries. A separate battery charger or inverter charger is required to recharge the battery bank; this inverter does not perform that function.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs a separate Bluetooth module required to use the app monitoring features?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo separate module is needed. The Renogy Pro inverter has Bluetooth built in, enabling real-time AC power monitoring and remote on\/off switching through the Renogy App without any additional hardware purchase.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat battery types is this inverter compatible with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Pro 12V Pure Sine Wave Inverter is compatible with AGM, GEL, flooded (FLD), and lithium (LI) 12V battery banks. It requires a 12V nominal DC input and is not rated for 24V or 48V systems.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat causes the inverter to shut down or trip a connected appliance?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Pro inverter includes built-in protections (undervoltage, overvoltage, overcurrent, overload, overtemperature, and short circuit) that shut the unit down when a connected load exceeds safe operating limits. Common causes include running multiple high-draw appliances simultaneously, inductive loads that spike current at startup, short circuits in a connected appliance, or loose DC wiring at the battery terminals.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"1000W","offer_id":50656009650246,"sku":"RIV1210PH-12S-G1-US","price":222.99,"currency_code":"USD","in_stock":true},{"title":"2000W","offer_id":50656009683014,"sku":"RIV1220PH-12S-G1-US","price":333.99,"currency_code":"USD","in_stock":true},{"title":"3000W","offer_id":50656009715782,"sku":"RIV1230PH-12S-G1-US","price":455.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1000.jpg?v=1792208373"},{"product_id":"renogy-200w-n-type-high-efficiency-solar-panel","title":"Renogy 200W N-Type High Efficiency Solar Panel","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 200W N-Type High Efficiency Solar Panel is a 200-watt rigid solar panel built for off-grid use in overlanding rigs, vans, RVs, trailers, and cabins. N-Type cells deliver conversion efficiency up to 25%, outperforming comparable P-type panels by 15% power generation in the same footprint. Two variants are available: the standard N-Type and the ShadowFlux™ N-Type, which adds Renogy's proprietary anti-shading cell interconnection technology for significantly reduced power loss under partial shade.\u003c\/p\u003e\n\n\u003ch2\u003eHigher Efficiency in the Same Footprint\u003c\/h2\u003e\n\u003cp\u003eN-Type cells in the Renogy 200W panel reach up to 25% conversion efficiency, which means more usable power from the same roof or rack space compared to conventional P-type panels. For overlanders and van builders working with limited mounting area, that efficiency gap translates directly into more charging capacity without adding panels or expanding the array. The 16-busbar ultra-fine gridline design minimizes internal shading loss and maximizes current collection, contributing to both higher output and longer cell lifespan. N-Type cells also carry a lower temperature coefficient (-0.27%\/°C) than P-type cells, so output holds steadier on hot summer days when panels are working hardest.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Light and All-Weather Reliability\u003c\/h2\u003e\n\u003cp\u003eLECO (Low-light Enhanced Cell Output) technology improves efficiency in overcast conditions while extending module durability, making it useful on cloudy travel days or in climates where full sun is not guaranteed. The panel's reinforced structure is rated for 5,400 Pa of snow load and 2,400 Pa of wind load, covering heavy accumulation and high-wind environments. A thickened frame and extra-strong glass provide resistance to hail, falling branches, and accidental impact, so the panel holds up through the conditions an overlanding or rooftop installation actually encounters.\u003c\/p\u003e\n\n\u003ch2\u003eShadowFlux™ Anti-Shading Technology (ShadowFlux Variant)\u003c\/h2\u003e\n\u003cp\u003eThe ShadowFlux™ N-Type variant uses advanced cell interconnection technology engineered specifically to reduce power loss when part of the panel is shaded. Conventional panels can lose most or all output from a single shaded cell; ShadowFlux is designed to keep generating at significantly higher wattage under the same shaded conditions. The technology addresses a wide range of real-world shading: small point shadows such as bird droppings, leaf litter, and mud; linear shadows from power lines, antenna wires, and boat rigging; partial and patchy shadows from chimneys, vents, and tree branches; and dynamic shadows from moving clouds or shifting objects. ShadowFlux also prevents shaded areas from overheating into hot spots, which protects the panel's long-term output and lifespan. The ShadowFlux™ N-Type variant has an open-circuit voltage of 36.5V and is compatible with both 12V and 24V battery systems; for installations with frequent long-duration partial shading (such as from trees, roof racks, or boat masts), a 12V system generally provides more stable charging performance when running a single panel. An MPPT charge controller is strongly recommended for the ShadowFlux variant; the controller should support a maximum input voltage of at least 50V and a charging current above 10A. Some third-party PWM controllers may not operate correctly with this panel.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN-Type cells, up to 25% efficiency:\u003c\/strong\u003e outperforms P-type cells by 15% power generation in the same panel size.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e16-busbar ultra-fine gridlines:\u003c\/strong\u003e minimize internal shading loss and maximize current collection for higher output and longer lifespan.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLECO low-light technology:\u003c\/strong\u003e boosts efficiency in overcast conditions and extends module durability.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eShadowFlux™ anti-shading (ShadowFlux variant only):\u003c\/strong\u003e advanced cell interconnection significantly reduces power loss under partial shade and prevents hot-spot overheating.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStructural ratings of 5,400 Pa snow load and 2,400 Pa wind load:\u003c\/strong\u003e reinforced frame and extra-strong glass for hail, impact, and harsh-weather durability.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompact sizing for vehicle installations:\u003c\/strong\u003e panel dimensions are matched to Class B van roof coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eShadowFlux™ N-Type\u003c\/th\u003e\n \u003cth\u003eN-Type\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Power Output\u003c\/td\u003e\n \u003ctd\u003e200W\u003c\/td\u003e\n \u003ctd\u003e200W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Type\u003c\/td\u003e\n \u003ctd\u003eN-Type\u003c\/td\u003e\n \u003ctd\u003eN-Type\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConversion Efficiency\u003c\/td\u003e\n \u003ctd\u003eUp to 25%\u003c\/td\u003e\n \u003ctd\u003eUp to 25%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBusbars\u003c\/td\u003e\n \u003ctd\u003e16\u003c\/td\u003e\n \u003ctd\u003e16\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Coefficient (Pmax)\u003c\/td\u003e\n \u003ctd\u003e-0.27%\/°C\u003c\/td\u003e\n \u003ctd\u003e-0.27%\/°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen-Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e36.5V\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n \u003ctd\u003e12V \/ 24V\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSnow Load Rating\u003c\/td\u003e\n \u003ctd\u003e5,400 Pa\u003c\/td\u003e\n \u003ctd\u003e5,400 Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWind Load Rating\u003c\/td\u003e\n \u003ctd\u003e2,400 Pa\u003c\/td\u003e\n \u003ctd\u003e2,400 Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e23.83 lb\u003c\/td\u003e\n \u003ctd\u003e26.9 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRSP200DC-ASR-G1-US\u003c\/td\u003e\n \u003ctd\u003eRSP200DC-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 200W N-Type Solar Panel suits overlanders, van builders, RV owners, and off-grid cabin or trailer setups that need high-efficiency solar charging in a compact rigid panel. The ShadowFlux™ N-Type variant is the right choice for installations where partial shading from roof racks, trees, rigging, or debris is a regular condition. Both variants are compatible with off-grid 12V and 24V battery systems using an MPPT charge controller.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis panel is not designed for on-grid or grid-tied systems. The ShadowFlux™ N-Type variant requires an MPPT charge controller with a maximum input voltage rating of at least 50V; PWM-only charge controllers may not operate correctly with it. Panel dimensions are not published for either variant; verify measurements before ordering if roof or rack space is constrained.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow does ShadowFlux™ technology reduce power loss under shade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 200W ShadowFlux™ N-Type panel uses advanced cell interconnection technology designed to keep generating power when part of the panel is shaded. Conventional panels can lose most or all output from a single shaded cell; the ShadowFlux variant is engineered to maintain significantly higher wattage output under the same shaded conditions. It also prevents shaded cells from overheating into hot spots, which protects long-term panel performance.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat types of shading does ShadowFlux™ handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ShadowFlux™ variant of the Renogy 200W N-Type panel is designed to minimize power loss across a wide range of shading scenarios: small point shadows such as bird droppings, leaf litter, and mud; linear shadows from power lines, antenna wires, and boat rigging; partial and patchy shadows from chimneys, vents, and tree branches; and dynamic shadows from moving clouds or shifting objects. For best results, Renogy recommends keeping more than half the panel surface in direct sunlight when possible.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this panel compatible with 12V and 24V battery systems?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ShadowFlux™ N-Type variant of the Renogy 200W panel is confirmed compatible with both 12V and 24V battery systems, with an open-circuit voltage of 36.5V. For installations with frequent long-duration partial shading (such as from trees, roof racks, or boat masts), a 12V system generally provides more stable charging performance when running a single panel.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat charge controller does this panel require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRenogy strongly recommends an MPPT charge controller for the 200W N-Type panel. MPPT controllers make full use of the panel's voltage and perform better under variable or low-light conditions than PWM controllers. For the ShadowFlux™ variant, the charge controller should support a maximum input voltage of at least 50V and a charging current above 10A. Some third-party PWM controllers may not operate correctly with this panel.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat else is needed to build a complete off-grid solar system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 200W N-Type Solar Panel generates power but requires additional components to form a complete off-grid system: an MPPT charge controller to regulate current, a deep-cycle battery to store energy, adapter kit cables to connect the panel to the controller, and tray cables to connect the controller to the battery. These components are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan solar panels be connected in series or parallel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eMultiple Renogy 200W N-Type panels can be wired in series, parallel, or a combination of both to match a system's voltage and current requirements. In a series connection, voltages add while current stays the same as a single panel. In a parallel connection, currents combine while voltage stays the same as a single panel. For the ShadowFlux™ variant, the charge controller's maximum input voltage rating should be sized as at least 50V multiplied by the number of panels wired in series.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"ShadowFlux™ N-Type","offer_id":50656019054662,"sku":"RSP200DC-ASR-G1-US","price":239.99,"currency_code":"USD","in_stock":true},{"title":"N-Type","offer_id":50656019087430,"sku":"RSP200DC-G1-US","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RSP195DC-ASR_14c11e96-93e1-4b72-8f55-a8c584c4553a.jpg?v=1792208399"},{"product_id":"renogy-dcc30s-12v-30a-dual-input-dc-dc-on-board-battery-charger-with-m","title":"Renogy DCC30S 12V 30A Dual Input DC-DC On-Board Battery Charger with MPPT","description":"\u003cp class=\"product-lead\"\u003eThe Renogy DCC30S is a 12V 30A on-board DC-DC battery charger with MPPT designed for overlanders, van builders, RV owners, and marine users who need to keep a house battery charged from two sources at once. It accepts input simultaneously from a vehicle alternator (via the starter battery) and from solar panels wired directly to the unit, delivering up to 30A of charging current to the house battery. Two variants are available: Battery Charger Only and W\/ Bluetooth, which adds a Bluetooth module for remote monitoring via the Renogy DC Home App.\u003c\/p\u003e\n\n\u003ch2\u003eTwo Inputs, One Charger\u003c\/h2\u003e\n\u003cp\u003eThe DCC30S accepts power from a vehicle alternator and from solar panels at the same time, routing both into the house battery simultaneously. On days when solar input is strong and the vehicle is also running, the charger draws from both sources rather than forcing a choice. When only one source is available, the unit operates on that source alone. A built-in Voltage Sensitive Relay (VSR) isolates the starter battery from the house battery, preventing the house battery from draining the starter battery, and trickle-charges the starter battery through the solar input when the house battery is already full.\u003c\/p\u003e\n\n\u003ch2\u003eSoft Start Protects the Alternator\u003c\/h2\u003e\n\u003cp\u003eThe DCC30S uses a soft start circuit that ramps input voltage gradually when the vehicle alternator comes online. An alternator that sees a sudden large load at startup can spike voltage momentarily, which risks damaging the charger or pulling the starter battery into over-discharge. The gradual ramp eliminates that spike. The charger also supports both traditional alternators (fixed voltage, 13.2–16VDC) and smart alternators (Euro 6, variable output, 12–16VDC); smart alternator installations require connecting the included IGN Signal Wire to the vehicle ignition port so the charger can read the alternator's operating state.\u003c\/p\u003e\n\n\u003ch2\u003eNEG-Terminal Design Simplifies Wiring\u003c\/h2\u003e\n\u003cp\u003eThe solar panel array, starter battery, and house battery all share a single integrated NEG-terminal block with internal partitions. Consolidating the negatives into one location reduces the number of separate grounding points, keeps the wiring run compact, and makes it harder to misconnect terminals during installation. Removable side covers protect the terminal block during transport and when the unit is not in use. Terminal size is M8*1.25 – 10mm, and the unit accepts wire in the 8AWG–4AWG range.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual simultaneous input:\u003c\/strong\u003e charges house battery from alternator and solar panels at the same time\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMPPT solar charging:\u003c\/strong\u003e 94% charging efficiency, max 30V \/ 400W solar input\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSmart alternator compatible:\u003c\/strong\u003e supports traditional (13.2–16VDC) and Euro 6 smart alternators (12–16VDC) via included IGN Signal Wire\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-chemistry support:\u003c\/strong\u003e configurable for AGM, Sealed (SLD), Gel, Flooded, Lithium, and user-defined battery types via push-button LED selector\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in VSR:\u003c\/strong\u003e isolates starter and house batteries; trickle-charges both when house battery is full\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRS485 communication:\u003c\/strong\u003e compatible with RMS-DCDC monitoring screen and DC Home App; W\/ Bluetooth variant adds wireless monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eParameter\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eSystem Voltage\u003c\/td\u003e\n\u003ctd\u003e12VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Voltage Range\u003c\/td\u003e\n\u003ctd\u003e9–16VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaximum Charging Current\u003c\/td\u003e\n\u003ctd\u003e30A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Types Supported\u003c\/td\u003e\n\u003ctd\u003eAGM\/SLD, GEL, FLD, LI, USER\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eService Battery Charging Mode\u003c\/td\u003e\n\u003ctd\u003eMPPT\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharging Efficiency\u003c\/td\u003e\n\u003ctd\u003e94%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax. Solar Input Voltage\u003c\/td\u003e\n\u003ctd\u003e30V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax. Solar Input Power\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAlternator Input Voltage (Traditional)\u003c\/td\u003e\n\u003ctd\u003e13.2–16VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAlternator Input Voltage (Smart \/ Euro 6)\u003c\/td\u003e\n\u003ctd\u003e12–16VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax. Alternator Input Power\u003c\/td\u003e\n\u003ctd\u003e400W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSelf-Consumption\u003c\/td\u003e\n\u003ctd\u003e60mA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;30mA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTemperature Compensation (Non-Lithium)\u003c\/td\u003e\n\u003ctd\u003e-3mV\/℃\/2V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTemperature Compensation (Lithium)\u003c\/td\u003e\n\u003ctd\u003e0mV\/℃\/2V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eGround Type\u003c\/td\u003e\n\u003ctd\u003eNegative\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminal Size\u003c\/td\u003e\n\u003ctd\u003eM8*1.25 – 10mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminal Wire Range\u003c\/td\u003e\n\u003ctd\u003e8AWG–4AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-31°F to 149°F \/ -35°C to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-40°F to 176°F \/ -40°C to 80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating \/ Storage Humidity\u003c\/td\u003e\n\u003ctd\u003e0%–95%, No Condensation\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e9.61 x 5.75 x 3.03 in \/ 244 x 146 x 77 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.13 lb \/ 1.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n\u003ctd\u003eRS485\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, ROHS, FCC Part 15 Class B, ETL listed to UL 1741 \u0026amp; CSA C22.2\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIncluded in Box\u003c\/td\u003e\n\u003ctd\u003eDC-DC Battery Charger x1, Battery Temperature Sensor x1, Battery Voltage Sensor x1, IGN Signal Wire x1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe DCC30S suits overlanders, van builders, RV owners, and boaters running a 12V house battery system who want to charge from both a vehicle alternator and solar panels, including those with smart (Euro 6) alternators. It supports Lithium, AGM, Gel, Flooded, and Sealed battery chemistries, making it a fit for most existing house battery setups.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe DCC30S is a 12V system charger only and does not support 24V or 48V house battery systems. Solar panels must be wired to stay within 30V input; panels in series configurations exceeding that limit are not compatible. The unit has no built-in display screen: battery type is set via push-button and LED indicator, and monitoring requires either the optional RS485-compatible RMS-DCDC screen or, on the W\/ Bluetooth variant, the DC Home App.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the DCC30S charge from solar and the alternator at the same time?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy DCC30S accepts input from both a vehicle alternator and solar panels simultaneously, routing both into the house battery at the same time. When both inputs are active, the maximum input current is 25A per source; when only one input is connected, that single source can supply up to 50A of input current.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this charger work with a smart alternator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DCC30S is compatible with both traditional alternators (fixed voltage, 13.2–16VDC) and smart alternators (Euro 6, variable output, 12–16VDC). Smart alternator installations require connecting the included IGN Signal Wire to the vehicle's ignition port so the charger can read the alternator's operating state and avoid over-discharge of the starter battery.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat battery chemistries does the DCC30S support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DCC30S supports AGM, Sealed (SLD), Gel, Flooded, Lithium, and a user-defined battery type. Battery type is selected using a push button on the unit; each press cycles the LED through a different color corresponding to a battery type. The battery type LED color chart is in the product manual.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat happens when the house battery is fully charged?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWhen the house battery reaches full charge, the DCC30S switches to trickle charge mode to maintain the house battery's state of charge. The built-in Voltage Sensitive Relay (VSR) also allows the solar input to trickle-charge the starter battery at that point, while keeping the two batteries isolated from each other to prevent charging interference.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DCC30S ships with the DC-DC battery charger unit, one battery temperature sensor, one battery voltage sensor, and one IGN Signal Wire for smart alternator connections. The W\/ Bluetooth variant also includes a Bluetooth module for wireless monitoring via the Renogy DC Home App.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Battery Charger Only","offer_id":50656105627718,"sku":"RBC30D1S-G5-US","price":186.99,"currency_code":"USD","in_stock":true},{"title":"W\/ Bluetooth","offer_id":50656105660486,"sku":"RBC30D1S-BT-US","price":214.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RBC30D1S-G4_01__27523.1751529158.1280.1280.jpg?v=1792208535"},{"product_id":"renogy-core-mini-lifepo4-12-8v-lithium-house-battery","title":"Renogy Core Mini LiFePO4 12.8V Lithium House Battery","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Core Mini is a 12.8V lithium iron phosphate (LiFePO4) house battery built for overlanding rigs, teardrop trailers, compact RVs, and kayak fishing setups where battery compartment space is tight. An IP65-rated enclosure, built-in low-temperature charging cut-off, and vibration-resistant metal cell spacers make it suited to rough-road and all-weather use. The Core Mini is available in 100Ah, 200Ah, and 300Ah capacities; detailed specifications below reflect the 100Ah variant, which is the smallest 12.8V 100Ah LFP battery in Renogy's lineup at Group 22NF size.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Footprint, Multi-Orientation Mounting\u003c\/h2\u003e\n\u003cp\u003eThe Core Mini's Group 22NF form factor (9.02 x 5.43 x 8.39 in for the 100Ah) is designed for battery bays and compartments where a full-size group battery will not fit. Multi-orientation mounting means the battery can be positioned to match the available space in a van build, trailer tongue box, or under-seat compartment rather than forcing a single fixed orientation. Allow 2–4 inches of clearance above the battery and 8 inches on the busbar side for safe installation.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Temperature Cut-Off for Winter Operation\u003c\/h2\u003e\n\u003cp\u003eThe Core Mini includes built-in low-temperature charging protection that prevents the battery from accepting a charge below 32°F (0°C). Charging a lithium iron phosphate cell below freezing can cause permanent internal damage; the cut-off removes that risk without requiring an external controller setting or manual intervention. Discharge remains available down to -4°F (-20°C), so the battery can still power loads in cold conditions even when charging is suspended.\u003c\/p\u003e\n\n\u003ch2\u003e5000-Cycle Lifespan and 300A Peak Surge (100Ah Variant)\u003c\/h2\u003e\n\u003cp\u003eThe 100Ah Core Mini is rated for 5000 cycles at 80% depth of discharge before reaching 80% end-of-life capacity. That cycle rating represents a meaningful lifespan advantage over lead-acid batteries in the same footprint. A 300A peak discharge current (5-second surge) supports high-demand appliance start-up, such as a compressor fridge or trolling motor, without the battery management system tripping under the inrush load. Maximum continuous charge and discharge current for the 100Ah variant is 100A each.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65 Protection:\u003c\/strong\u003e dust-tight and water-jet resistant enclosure for all-weather durability\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-In Low-Temperature Cut-Off:\u003c\/strong\u003e suspends charging below 32°F (0°C) to protect cell integrity\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eVibration-Resistant Design:\u003c\/strong\u003e metal cell spacers prevent internal cell movement on rough terrain or choppy water\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-Orientation Mounting:\u003c\/strong\u003e installs in multiple positions to fit tight or unconventional battery bays\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSeries and Parallel Expandability:\u003c\/strong\u003e supports up to 4S4P configuration; up to 16 batteries can be connected for expanded capacity (100Ah variant)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBattery Shunt Compatible:\u003c\/strong\u003e works with the Renogy 300A Battery Shunt (sold separately) for remote state-of-charge monitoring via the DC Home app\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e100Ah Mini\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Type\u003c\/td\u003e\n \u003ctd\u003eLithium Iron Phosphate (LiFePO4)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eNominal Voltage\u003c\/td\u003e\n \u003ctd\u003e12.8V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Capacity\u003c\/td\u003e\n \u003ctd\u003e100Ah (0.5C, 25°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Range\u003c\/td\u003e\n \u003ctd\u003e10V to 14.8V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Charge Current\u003c\/td\u003e\n \u003ctd\u003e100A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Discharge Current\u003c\/td\u003e\n \u003ctd\u003e100A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n \u003ctd\u003e300A @ 5s\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCycle Life\u003c\/td\u003e\n \u003ctd\u003e5000 cycles (80% DOD, 80% EOL, 0.5C, 25°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharge Temperature\u003c\/td\u003e\n \u003ctd\u003e32°F to 122°F (0°C to 50°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDischarge Temperature\u003c\/td\u003e\n \u003ctd\u003e-4°F to 140°F (-20°C to 60°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-13°F to 149°F (-25°C to 65°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003eIP65\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConnection Method\u003c\/td\u003e\n \u003ctd\u003eSeries \u0026amp; Parallel (4S4P)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Bolt Size\u003c\/td\u003e\n \u003ctd\u003eM8 x 1.25 x 12 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRecommended Terminal Torque\u003c\/td\u003e\n \u003ctd\u003e88.5–106.2 inch·lbs (10–12 N·m)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e9.02 x 5.43 x 8.39 in (229 x 138 x 213 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e21.8 lbs (9.9 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Humidity\u003c\/td\u003e\n \u003ctd\u003e10% to 95%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eGroup Size\u003c\/td\u003e\n \u003ctd\u003e22NF\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n \u003ctd\u003e2x Long Terminal Bolts (M8 x 1.25 x 15 mm), User Manual\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Core Mini LiFePO4 battery suits overlanders, van builders, teardrop trailer owners, and kayak anglers who need a compact 12V lithium house battery in a tight or unconventional battery bay. The built-in low-temperature cut-off makes it a practical choice for four-season use without relying on a charger with a dedicated cold-weather lithium profile.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Core Mini does not include a Bluetooth port; real-time state-of-charge monitoring requires a separately purchased Renogy 300A Battery Shunt. Specifications for the 200Ah and 300Ah variants, including dimensions, weight, max charge and discharge current, and certifications, are not published in the current product listing and should be confirmed before purchase if those figures are decision-critical.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the Core Mini 100Ah battery be connected in series for a 24V system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. Renogy Core Mini 12.8V 100Ah batteries can be connected in series to build a 24V off-grid power system. Up to 16 batteries of the same model and similar capacity can be connected in series and parallel, expanding total capacity to 20.48kWh for the 100Ah variant.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Core Mini battery have low-temperature charging protection?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy Core Mini LiFePO4 battery has built-in low-temperature charging cut-off that prevents the battery from accepting a charge below 32°F (0°C). This protection is built into the battery management system and does not require a separate controller setting.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I monitor the Core Mini's state of charge via a smartphone app?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Core Mini battery does not have a Bluetooth port for a Bluetooth module. State-of-charge monitoring is possible by connecting the battery to a Renogy 300A Battery Shunt (sold separately), which transmits data to the DC Home app via Bluetooth.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat clearance does the Core Mini require during installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRenogy specifies 2–4 inches of clearance above the Core Mini battery and 8 inches of clearance on the busbar side. Multi-orientation mounting allows the battery to be positioned to match the available space in a van build, trailer tongue box, or other tight compartment.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat charger types are compatible with the Core Mini LiFePO4 battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Core Mini LiFePO4 battery is compatible with solar charge controllers, DC-DC battery chargers, and AC-DC chargers. Renogy recommends using a charger or solar charge controller with a lithium iron phosphate charging profile to ensure proper charge voltage and cut-off behavior.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"300Ah Mini","offer_id":50656105824326,"sku":"RBT12300LFP-M-G1-US","price":879.99,"currency_code":"USD","in_stock":true},{"title":"200Ah Mini","offer_id":50656105857094,"sku":"RBT12200LFP-M-G1-US","price":653.99,"currency_code":"USD","in_stock":true},{"title":"100Ah Mini","offer_id":50656105889862,"sku":"RBT12100LFP-M-G2-US","price":307.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/300mini_8e5f0ba8-fe0e-401f-8892-31d1ad1947e0.jpg?v=1792208544"},{"product_id":"renogy-anl-fuse-cable-with-double-ring-terminals-for-3-8-in-lugs","title":"Renogy ANL Fuse Cable with Double Ring Terminals for 3\/8 in Lugs","description":"\u003cp class=\"product-lead\"\u003eThe Renogy ANL Fuse Cable is a short, purpose-built connection cable for linking an ANL fuse to a battery in an off-grid power system. Double ring terminals, one at each end, seat onto 3\/8 in lugs for a secure, low-resistance connection at both the battery post and the ANL fuse. This listing covers the 1 ft length in two wire gauges: 8AWG and 10AWG.\u003c\/p\u003e\n\n\u003ch2\u003eRated for the Conditions Off-Grid Systems Face\u003c\/h2\u003e\n\u003cp\u003eThe ANL Fuse Cable carries a rated voltage of AC Uo\/U 0.6\/1 KV and DC 1.8KV, and an operating temperature range of -40°F to +194°F. That range covers the temperature swings a battery compartment in a van, trailer, or overlanding rig encounters, from cold-soak starts in winter to engine-bay-adjacent heat in summer, without the cable jacket degrading or the connection loosening.\u003c\/p\u003e\n\n\u003ch2\u003eTUV Tested and UV Resistant\u003c\/h2\u003e\n\u003cp\u003eThe cable is TUV tested, and the TUV logo is printed per foot along the jacket to confirm compliance. The jacket is also UV resistant, which matters for installations where the cable runs through or near an exposed compartment rather than fully enclosed. Both attributes are stated on the cable itself, not just on the packaging.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDouble ring terminals:\u003c\/strong\u003e one end connects to the battery post, the other to the ANL fuse, both sized for 3\/8 in lugs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTUV tested:\u003c\/strong\u003e TUV logo printed per foot on the cable jacket\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUV-resistant jacket:\u003c\/strong\u003e resists degradation from sun exposure\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide temperature rating:\u003c\/strong\u003e -40°F to +194°F operating range\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTwo gauge options:\u003c\/strong\u003e 8AWG and 10AWG available in this 1 ft listing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e1 ft 8AWG\u003c\/th\u003e\n \u003cth\u003e1 ft 10AWG\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e1 ft\u003c\/td\u003e\n \u003ctd\u003e1 ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Gauge\u003c\/td\u003e\n \u003ctd\u003e8AWG\u003c\/td\u003e\n \u003ctd\u003e10AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Lug Size\u003c\/td\u003e\n \u003ctd\u003e3\/8 in\u003c\/td\u003e\n \u003ctd\u003e3\/8 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Voltage\u003c\/td\u003e\n \u003ctd\u003eAC Uo\/U 0.6\/1 KV, DC 1.8KV\u003c\/td\u003e\n \u003ctd\u003eAC Uo\/U 0.6\/1 KV, DC 1.8KV\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to +194°F\u003c\/td\u003e\n \u003ctd\u003e-40°F to +194°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis cable suits builders wiring an ANL fuse into a 12V off-grid system (overlanding rigs, van builds, trailers, and cabin setups) where a short, rated connection between the battery post and the ANL fuse body is needed. Both variants terminate in 3\/8 in ring lugs.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis listing covers only the 1 ft length in 8AWG and 10AWG. It does not include a 2 ft length or other gauges, and it does not include the ANL fuse holder itself, which is a separate component.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the ANL Fuse Cable connect?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL Fuse Cable bridges the ANL fuse holder and the battery in an off-grid DC power system. A ring terminal at each end seats onto 3\/8 in lugs (one at the battery post, one at the ANL fuse), creating a rated, low-resistance connection between the two components.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the ANL fuse holder included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. This listing covers the fuse cable only: the short wire with double ring terminals. The ANL fuse holder is a separate component and is not included with this cable.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat temperature range does the cable handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL Fuse Cable is rated for an operating temperature range of -40°F to +194°F, covering cold-weather starts and the elevated temperatures found in enclosed battery compartments or engine-adjacent installations.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"1ft 8AWG","offer_id":50656177389638,"sku":"RNG-ANLFUSECB-8-G2-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"1ft 10AWG","offer_id":50656177422406,"sku":"RNG-ANLFUSECB-10-G2-US","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__71106.1747033218.1280.1280.jpg?v=1792208631"},{"product_id":"renogy-250w-n-type-bifacial-solar-panel-for-12v-systems","title":"Renogy 250W N-Type Bifacial Solar Panel for 12V Systems","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel is a 250-watt monocrystalline panel built for off-grid overlanding rigs, vans, RVs, trailers, and cabin installations running 12V battery systems. N-Type TOPCon cell construction delivers 21.2% module efficiency and an 80% bifaciality factor, allowing the panel to harvest usable power from reflected light on the rear face as well as direct sunlight on the front. Open-circuit voltage of 22.35V keeps the panel compatible with both MPPT and PWM charge controllers.\u003c\/p\u003e\n\n\u003ch2\u003eBifacial Design Puts Both Sides to Work\u003c\/h2\u003e\n\u003cp\u003eThe 80% bifaciality factor means the rear face of the panel captures reflected and diffuse light from the mounting surface below (ground albedo, a white roof, or a reflective deck) and converts it into additional output. Renogy states this rear-side contribution adds approximately 14% more power compared to a conventional monofacial PERC panel of the same wattage. For a fixed roof or rack installation where the panel angle cannot be adjusted throughout the day, that passive rear-side gain is real additional harvest with no added hardware or effort.\u003c\/p\u003e\n\n\u003ch2\u003eN-Type Cells Hold Output When Temperatures Rise\u003c\/h2\u003e\n\u003cp\u003eSolar panels lose efficiency as cell temperature climbs, a pattern that compounds on dark metal roofs and in desert or summer overlanding conditions. The N-Type cells in this panel carry a temperature coefficient of -0.29%\/°C, meaning output degrades more slowly per degree of heat gain than conventional p-type PERC panels. The operating temperature range spans -40°F to 194°F (-40°C to 90°C), covering cold-weather storage and high-heat deployment without requiring derating.\u003c\/p\u003e\n\n\u003ch2\u003e16-Busbar Construction and a Reinforced Frame\u003c\/h2\u003e\n\u003cp\u003eSixteen busbars (16BB) distribute current across each cell through more conductive pathways than older 4- or 5-busbar designs, reducing resistive losses and lowering the mechanical stress that causes microcracks over years of thermal cycling and vibration. The aluminum alloy frame measures over 1.1mm thick, providing the structural rigidity needed to survive road vibration on a roof rack or truck bed without flexing the glass laminate. Construction layers include low-iron tempered glass on the front, POE encapsulant film, N-Type solar cells, and a transparent backsheet that allows rear-face light capture.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e250W rated output at STC:\u003c\/strong\u003e 21.2% module efficiency with 22.35V open-circuit voltage and 13.49A short-circuit current\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e80% bifaciality factor:\u003c\/strong\u003e rear face generates approximately 14% additional power from reflected light compared to monofacial PERC panels\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e-0.29%\/°C temperature coefficient:\u003c\/strong\u003e reduced output loss in high-heat conditions versus p-type PERC panels\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e16-busbar (16BB) cell technology:\u003c\/strong\u003e improves energy conversion and reduces microcrack risk during thermal cycling\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAluminum alloy frame over 1.1mm thick:\u003c\/strong\u003e reinforced for structural strength under road vibration and weather loading\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP68-rated:\u003c\/strong\u003e sealed against dust ingress and sustained water immersion\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Power at STC\u003c\/td\u003e\n \u003ctd\u003e250W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eModule Efficiency\u003c\/td\u003e\n \u003ctd\u003e21.2%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e22.35V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShort Circuit Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e13.49A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Voltage (Vmp)\u003c\/td\u003e\n \u003ctd\u003e19.52V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Current (Imp)\u003c\/td\u003e\n \u003ctd\u003e12.81A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum System Voltage\u003c\/td\u003e\n \u003ctd\u003e1000VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Series Fuse Rating\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Coefficient (Pmax)\u003c\/td\u003e\n \u003ctd\u003e-0.29%\/°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBifaciality Factor\u003c\/td\u003e\n \u003ctd\u003e80%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F~194°F \/ -40℃~90℃\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003eIP68\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e1547x763x30mm \/ 60.9x30.0x1.2in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e12.4kg \/ 27.3lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFrame Material\u003c\/td\u003e\n \u003ctd\u003eAluminum alloy (over 1.1mm thick)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Type\u003c\/td\u003e\n \u003ctd\u003eN-Type, 16-busbar\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eManufacturing Facility\u003c\/td\u003e\n \u003ctd\u003eISO 9001 certified\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIn the Box\u003c\/td\u003e\n \u003ctd\u003e250W N-Type Bifacial Solar Panel, User Manual, Warranty Card\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel suits overlanders, van builders, RV owners, and off-grid cabin installers running 12V battery systems who want a high-efficiency panel that continues generating from reflected rear-face light. The 22.35V open-circuit voltage works with both MPPT and PWM charge controllers, and the 1000VDC maximum system voltage supports series and parallel array configurations.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis panel does not include a charge controller, battery, mounting hardware, or wiring; those components are sold separately. At 60.9x30.0 inches and 27.3lbs, it is a full-size rigid panel and is not a portable or foldable option. The bifacial rear-face gain applies only when the panel is mounted with clearance below the rear face; flush mounting against an opaque surface eliminates rear-side harvest.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat charge controller does this panel require?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel has an open-circuit voltage of 22.35V and a maximum system voltage of 1000VDC. That Voc is compatible with both MPPT and PWM charge controllers designed for 12V battery systems. A charge controller is not included and must be purchased separately; verify the controller's input voltage and current ratings against this panel's specifications before wiring.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the bifacial design work in a real installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel captures light through a transparent backsheet on the rear face in addition to the front glass. When mounted with open space beneath (on a roof rack, elevated ground mount, or tilted frame), reflected and diffuse light from the surface below reaches the rear cells. Renogy states this adds approximately 14% more power compared to a conventional monofacial PERC panel. Flush mounting against an opaque surface eliminates this rear-side contribution.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the temperature coefficient of -0.29%\/°C mean for hot-weather use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEvery solar panel loses some output as cell temperature rises above the standard test condition of 25°C. The Renogy 250W N-Type Bifacial Solar Panel's temperature coefficient of -0.29%\/°C means it loses 0.29% of its rated output for each degree Celsius of temperature rise above that baseline. N-Type cells carry a lower coefficient than typical p-type PERC panels, so this panel retains more of its rated 250W output on hot days and in high-heat mounting environments.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan multiple panels be wired in series or parallel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel supports both series and parallel wiring configurations. The maximum system voltage of 1000VDC allows multiple panels to be connected in series, which adds their voltages while keeping current constant. Parallel wiring adds current while keeping voltage at one panel's level. The maximum series fuse rating is 30A. Match the combined array output to a charge controller rated for the resulting voltage and current before wiring.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 250W N-Type Bifacial Solar Panel ships with the panel itself, a user manual, and a warranty card. A charge controller, battery, mounting hardware, adapter cables, and tray cables are not included and must be sourced separately to complete a functional off-grid solar system.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656235061318,"sku":"RSP250DCT-G1-US","price":264.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RSP250DCT-_01__39557.1734508309.1280.1280.jpg?v=1792208694"},{"product_id":"renogy-2000w-12v-pure-sine-wave-inverter-with-ups-transfer-switch","title":"Renogy 2000W 12V Pure Sine Wave Inverter with UPS Transfer Switch","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 2000W 12V Pure Sine Wave Inverter (model RIV1220PU-126) converts 12V DC battery power to 120V AC at 2000W continuous output, with a 4000W surge rating for two seconds to handle motor-start loads. A built-in UPS transfer switch automatically switches between shore power and battery power, keeping connected devices running without interruption. Built-in Bluetooth connects to the DC Home app for real-time monitoring of voltage, current, and power status.\u003c\/p\u003e\n\n\u003ch2\u003eClean Power for Sensitive Electronics\u003c\/h2\u003e\n\u003cp\u003eThe Renogy 2000W inverter produces a pure sine wave output with total harmonic distortion of 3% or less, which is cleaner than the grid's typical 5% THD threshold. That matters for motor-driven appliances such as refrigerators, microwave ovens, and CPAP machines, which run cooler and quieter on a clean waveform than on the stepped output of a modified sine wave inverter. The 120V AC output stays within ±3% of rated voltage, so sensitive electronics receive stable power rather than the voltage swings that can shorten their service life.\u003c\/p\u003e\n\n\u003ch2\u003eAutomatic Backup When Shore Power Drops\u003c\/h2\u003e\n\u003cp\u003eThe built-in UPS transfer switch carries a 20A rating and switches the inverter between shore power (grid or generator) and battery power automatically. When shore power is present, connected loads draw from it directly; when it drops, the inverter takes over from the 12V battery bank without requiring manual intervention. This makes the Renogy 2000W inverter practical for RVs, vans, semi-trucks, and marine installations where power source availability changes throughout the day.\u003c\/p\u003e\n\n\u003ch2\u003eEfficient Operation and Thermal Management\u003c\/h2\u003e\n\u003cp\u003eThe Renogy 2000W inverter exceeds 92% efficiency at partial load and exceeds 87% efficiency at full load, with idle power consumption below 18W. Thermally controlled fans run only when internal temperature requires cooling, which keeps operating noise below 51dB and reduces unnecessary power draw. The IP20 enclosure rating means the unit is suited for enclosed, dry installations; it is not rated for exposure to water or direct weather.\u003c\/p\u003e\n\n\u003ch2\u003eRemote Control and App Monitoring\u003c\/h2\u003e\n\u003cp\u003eThe included wired remote control (16.40 ft cable, front plate 4.3 × 2.6 × 1.3 in) lets the inverter be switched on or off from a distance without reaching the unit itself. Built-in Bluetooth pairs with the Renogy DC Home app, giving real-time visibility into output power, voltage, and current levels from a smartphone. The two features work independently, so the inverter can be controlled physically or wirelessly depending on the installation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e2000W continuous \/ 4000W surge:\u003c\/strong\u003e handles steady loads up to 2000W and motor-start peaks up to 4000W for two seconds\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePure sine wave output:\u003c\/strong\u003e THD ≤3%, 120V AC ±3%, 50\/60Hz selectable\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUPS transfer switch (20A):\u003c\/strong\u003e automatic switchover between shore power and 12V battery bank\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bluetooth:\u003c\/strong\u003e pairs with the Renogy DC Home app for real-time power monitoring\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThermally controlled fans:\u003c\/strong\u003e run on demand; operating noise below 51dB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-layer protection:\u003c\/strong\u003e over-voltage, over-current, and short-circuit protection with automatic shutdown thresholds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRIV1220PU-126\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Waveform\u003c\/td\u003e\n\u003ctd\u003ePure Sine Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eContinuous Output Power\u003c\/td\u003e\n\u003ctd\u003e2000W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSurge Rating\u003c\/td\u003e\n\u003ctd\u003e4000W (@ 2s)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e120V AC ±3%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Frequency\u003c\/td\u003e\n\u003ctd\u003e50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eContinuous Output Current\u003c\/td\u003e\n\u003ctd\u003e16.6A AC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion (THD)\u003c\/td\u003e\n\u003ctd\u003e≤3%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Battery Input Voltage\u003c\/td\u003e\n\u003ctd\u003e12VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e11–15.5VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaximum Continuous Battery Output Current\u003c\/td\u003e\n\u003ctd\u003e210A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInverter Efficiency\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;92%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eFull Load Efficiency\u003c\/td\u003e\n\u003ctd\u003e\u0026gt;87%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;18W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTransfer Switch Rating\u003c\/td\u003e\n\u003ctd\u003e20A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Overvoltage Shutdown\u003c\/td\u003e\n\u003ctd\u003e16.0VDC ±0.3VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Low Voltage Alarm\u003c\/td\u003e\n\u003ctd\u003e11.0VDC ±0.3VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Low Voltage Shutdown\u003c\/td\u003e\n\u003ctd\u003e10.5VDC ±0.3VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAC Terminals\u003c\/td\u003e\n\u003ctd\u003e2 × AC Sockets + Terminal Block\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDC Terminals\u003c\/td\u003e\n\u003ctd\u003eM8-25\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-4°F ~ 113°F \/ -20°C ~ 45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°F ~ 158°F \/ -40°C ~ 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eMax 95%, Non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eThermally Controlled Fans\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e18.3 × 9.9 × 3.8 in \/ 468.3 × 250.4 × 95.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.8 kg \/ 12.8 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eNoise Level\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;51dB\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRegulatory\u003c\/td\u003e\n\u003ctd\u003eUL458, FCC Part 15 Class B\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWired Remote Cable Length\u003c\/td\u003e\n\u003ctd\u003e16.40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWired Remote Front Plate Dimensions\u003c\/td\u003e\n\u003ctd\u003e4.3 × 2.6 × 1.3 in \/ 108 × 67 × 32 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eInverter, 1\/0AWG 3ft cable pair, wired remote control, 5m RJ12 Ethernet cable, user manual\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 2000W 12V Pure Sine Wave Inverter suits overlanders, van builders, RV owners, and marine or semi-truck installations running a 12V house battery bank who need clean AC power for motor-driven or sensitive electronics and want automatic switchover between shore power and battery power without manual intervention.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis inverter is rated for 12VDC input only and is not compatible with 24V or 48V battery systems. The IP20 enclosure rating means it is not suitable for outdoor or exposed installations where it may contact water, dust, or direct weather. Combined loads must not exceed 2000W continuous; the 20A transfer switch limits shore-power pass-through to 20A.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between a pure sine wave inverter and a modified sine wave inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W Pure Sine Wave Inverter produces a smooth, consistent AC waveform with THD of 3% or less, which is cleaner than the grid's typical 5% THD. A modified sine wave inverter produces a stepped waveform with THD in the 20–40% range, which can cause motor-driven appliances such as refrigerators and microwave ovens to run hotter, louder, and less efficiently.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the UPS transfer switch work?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWhen shore power or grid power is connected, the Renogy 2000W inverter passes that power through to connected loads automatically. If shore power is interrupted, the built-in UPS transfer switch, rated at 20A, switches the inverter to draw from the 12V battery bank, keeping connected devices running without requiring manual action.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat loads can this inverter run, and what should be avoided?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W inverter can power any AC load rated at 2000W or less, including portable freezers, microwave ovens, and similar appliances. Inductive loads such as air conditioners, refrigerators, and motors draw high peak current at startup; the 4000W surge rating handles those peaks for up to two seconds. Running multiple high-draw appliances simultaneously should be avoided if their combined wattage exceeds 2000W.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the built-in Bluetooth do, and what app does it use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W inverter's built-in Bluetooth connects to the Renogy DC Home app on a smartphone, providing real-time monitoring of output power, voltage, and current levels. The wired remote control (included, 16.40 ft cable) provides on\/off switching independently of the app, so the inverter can be operated without a phone if preferred.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat clearance does the inverter need during installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W inverter requires approximately 1.97 in of clearance above the top of the unit and at least 4 in of clearance on the busbar side to allow adequate airflow for the thermally controlled cooling fans. The unit measures 18.3 × 9.9 × 3.8 in and weighs 12.8 lb, so mounting surface and cable routing should be planned before installation.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656304791622,"sku":"RIV1220PU-126-G1-US","price":364.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RIV1220PU-126_134e2f5d-126d-4276-b068-cfa4cde5622c.png?v=1792208812"},{"product_id":"renogy-core-series-12v-50ah-lifepo4-deep-cycle-battery","title":"Renogy Core Series 12V 50Ah LiFePO4 Deep Cycle Battery","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Core Series 12V 50Ah LiFePO4 Deep Cycle Battery is a 640Wh lithium iron phosphate house battery rated for 3500 cycles at 80% depth of discharge, built for overlanders, RV travelers, campers, and off-grid cabin installations that need reliable stored power without the weight and maintenance demands of AGM. The ABS+PC unibody housing carries an IP65 water-resistance rating and weighs 11.77 lbs, fitting tight battery compartments while supporting series and parallel expansion up to a 4S4P configuration.\u003c\/p\u003e\n\n\u003ch2\u003e3500-Cycle Durability in a Compact Package\u003c\/h2\u003e\n\u003cp\u003eThe Core Series battery uses Class A LiFePO4 cells in a unibody ABS+PC housing that measures 7.8 × 6.5 × 6.7 in. At 11.77 lbs, the battery fits spaces where heavier lead-acid units would require structural reinforcement or simply won't fit. The 3500-cycle rating at 80% DOD means the battery can sustain deep daily discharge for years before capacity drops to 80% of its original rating, a meaningful consideration for anyone running lights, a refrigerator, or communication gear every night on a trip or in a remote cabin.\u003c\/p\u003e\n\n\u003ch2\u003eBMS Protection Across Every Operating Condition\u003c\/h2\u003e\n\u003cp\u003eThe built-in Battery Management System guards against overcharging, over-discharging, overcurrent, short circuit, and reverse polarity. A 0V charging function allows the BMS to reactivate a deeply depleted battery that has sat unused, rather than writing it off. The BMS also balances cells within the pack, which matters most when the battery is wired in parallel with other units. Cell imbalance is the most common cause of premature capacity loss in multi-battery setups.\u003c\/p\u003e\n\n\u003ch2\u003eExpandable to 10.24kWh in a 4S4P Bank\u003c\/h2\u003e\n\u003cp\u003eThe Core Series 12V 50Ah battery supports series connections up to 4 units (for 24V, 36V, or 48V systems) and parallel connections up to 8 units. Renogy recommends a maximum of 4S4P for this battery; connecting up to 4S8P is possible but carries increased safety risk. A 4S4P bank reaches 10.24kWh, enough capacity for a van build, a small off-grid cabin, or a trailer with significant appliance loads. Only the same battery model may be combined in a bank.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e640Wh energy capacity:\u003c\/strong\u003e 12V nominal, 50Ah rated, voltage range 10–14.8V\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65 water resistance:\u003c\/strong\u003e ABS+PC unibody housing rated for dust-tight and water-jet protection\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAdvanced BMS:\u003c\/strong\u003e protects against overcharge, over-discharge, overcurrent, short circuit, and reverse polarity; includes 0V charging recovery function\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eClass A LiFePO4 cells:\u003c\/strong\u003e 3500-cycle rating at 80% DOD and 80% end-of-life threshold (0.5C, 25°C)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eScalable architecture:\u003c\/strong\u003e series up to 4 units, parallel up to 8 units; 4S4P recommended maximum\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIncluded hardware:\u003c\/strong\u003e M8 bolts ×2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Capacity\u003c\/td\u003e\n\u003ctd\u003e50Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage Range\u003c\/td\u003e\n\u003ctd\u003e10–14.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnergy\u003c\/td\u003e\n\u003ctd\u003e640Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e3500 cycles (80% DOD, 80% EOL) at 0.5C \/ 25°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge Current\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.4V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Cut-off Voltage\u003c\/td\u003e\n\u003ctd\u003e14.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Discharge Current\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDischarge Cut-off Voltage\u003c\/td\u003e\n\u003ctd\u003e10V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C–55°C \/ 32°F–131°F\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDischarge Temperature\u003c\/td\u003e\n\u003ctd\u003e-20°C–60°C \/ -4°F–140°F\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-25°C–65°C \/ -13°F–149°F\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStandard Operation Temperature\u003c\/td\u003e\n\u003ctd\u003e73.4 ± 9°F \/ 23 ± 5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eABS+PC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e7.8 × 6.5 × 6.7 in \/ 198 × 165 × 169 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e11.77 lbs \/ 5.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eSeries up to 4, Parallel up to 8 (4S4P recommended max)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSelf-Heating\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBuilt-in Bluetooth\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCommunication Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIncluded Hardware\u003c\/td\u003e\n\u003ctd\u003eM8 bolts ×2\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eMSDS, UN38.3, FCC, CE, UKCA, PSE\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Core Series 12V 50Ah LiFePO4 battery suits overlanders, van builders, RV travelers, and off-grid cabin owners who need a lightweight, deep-cycle house battery for lighting, small appliances, communication gear, trolling motors, or ham radio setups. Its IP65 rating and compact dimensions make it practical in exposed or space-constrained installations.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis battery does not include a self-heating function, so charging below 0°C \/ 32°F is outside its specified charge temperature range. The battery has no built-in Bluetooth or communication port, so state-of-charge monitoring requires an external battery monitor. This battery is not designed for use as a vehicle starting battery.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat makes the Core Series 12V 50Ah battery different from a standard LiFePO4 battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Core Series 12V 50Ah battery uses Class A LiFePO4 cells in a unibody ABS+PC housing with an upgraded BMS that monitors cell health, balances the pack, and provides protection against overcharge, over-discharge, overcurrent, short circuit, and reverse polarity. A 0V charging recovery function can reactivate a deeply depleted battery. The IP65-rated housing adds dust-tight and water-jet resistance for outdoor and vehicle installations.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the 12V 50Ah Core Series battery be wired into a larger bank?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Core Series 12V 50Ah battery supports series connections up to 4 units and parallel connections up to 8 units. Renogy recommends a maximum 4S4P configuration; a 4S8P connection is possible but carries increased safety risk. Only the same battery model may be combined in a bank. A 4S4P bank reaches 10.24kWh of total capacity.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the charge temperature range for the 12V 50Ah Core Series battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Core Series 12V 50Ah battery has a specified charge temperature range of 0°C–55°C \/ 32°F–131°F. This battery does not include a self-heating function, so charging in sub-freezing conditions is outside its rated operating range. Discharge is rated from -20°C to 60°C \/ -4°F to 140°F, and storage is rated from -25°C to 65°C \/ -13°F to 149°F.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow should the 12V 50Ah Core Series battery be stored when not in use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRenogy recommends storing the Core Series 12V 50Ah battery at approximately 50% charge and recharging it every three months to maintain performance. The specified storage temperature range is -25°C to 65°C \/ -13°F to 149°F. Storing the battery fully discharged for extended periods can reduce long-term capacity.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the 12V 50Ah Core Series battery support a 48V system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Core Series 12V 50Ah battery can be connected in series to build 24V, 36V, or 48V systems. Up to 4 units may be wired in series, and series sets may then be wired in parallel (same model required) up to a 4S4P configuration for a maximum of 10.24kWh. Renogy recommends 4S4P as the safe maximum for this battery.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656316784710,"sku":"RBT1250LFP-G1-US","price":196.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RBT12100LFP__83323.1751963182.1280.1280.jpg?v=1792208876"},{"product_id":"renogy-battery-shunt-300-monitor-with-bluetooth","title":"Renogy Battery Shunt 300 Monitor with Bluetooth","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Battery Shunt 300 is a Bluetooth-enabled battery monitor rated for up to 300A continuous current across 8–120V DC systems, designed for overlanders, van builders, and off-grid cabin or trailer setups that need accurate, real-time visibility into battery state of charge, temperature, and voltage. Current accuracy is ±1% with a 0.01A resolution. The shunt is available alone or bundled with the Renogy ONE Core for integrated system monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eAccurate Data Where Guessing Costs You\u003c\/h2\u003e\n\u003cp\u003eThe Battery Shunt 300 measures current at ±1% accuracy with a 0.01A resolution, which means the state-of-charge reading in the DC Home App reflects what your battery bank actually holds, not a rough estimate based on voltage alone. For a system powering a refrigerator, lighting, and charging gear through a multi-day trip, that difference matters: you know how much capacity you have left before you need to run the alternator or generator, rather than finding out when something shuts off.\u003c\/p\u003e\n\n\u003ch2\u003e300A Continuous Rating for High-Draw Systems\u003c\/h2\u003e\n\u003cp\u003eThe Battery Shunt 300 handles up to 300A of continuous current and 500A peak for up to 10 seconds, which covers the inrush and sustained draw of large lithium or AGM house battery banks common in overlanding rigs and camper vans. The 300A figure represents the shunt's measurement ceiling, not a restriction on battery bank size. If your circuit's maximum continuous current stays within 300A, the shunt can monitor it regardless of total bank capacity.\u003c\/p\u003e\n\n\u003ch2\u003eBluetooth Monitoring Without Opening a Panel\u003c\/h2\u003e\n\u003cp\u003eThe Battery Shunt 300 communicates via Bluetooth LE and BLE Mesh, so battery data (state of charge, temperature, starter battery voltage, and historical records) is readable in the DC Home App without physically accessing the shunt. The included 1.5 m temperature sensor attaches directly to the battery and feeds thermal data alongside current and voltage readings, giving a complete picture of battery health in one view. Connection points on the shunt include protective covers to resist loosening from vibration.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e300A continuous \/ 500A peak:\u003c\/strong\u003e handles high-draw house battery systems; 500A peak rated for durations under 10 seconds\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e±1% current accuracy, 0.01A resolution:\u003c\/strong\u003e precise state-of-charge tracking across a 1–6500Ah battery capacity range\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBluetooth LE and BLE Mesh:\u003c\/strong\u003e wireless communication with the DC Home App and Renogy ONE Core\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIncluded temperature sensor:\u003c\/strong\u003e 1.5 m sensor monitors battery temperature in the range of -20–80℃\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSurface-mount installation:\u003c\/strong\u003e mounts on top of the battery or wall-mounted with included screws; M10 bolt battery connection\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide voltage range:\u003c\/strong\u003e operates across 8–120V DC systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Supply\u003c\/td\u003e\n \u003ctd\u003e8–120 VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Consumption\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;0.1 W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Continuous Current\u003c\/td\u003e\n \u003ctd\u003e300A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Peak Current\u003c\/td\u003e\n \u003ctd\u003e500A (\u0026lt;10s)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCurrent Accuracy\u003c\/td\u003e\n \u003ctd\u003e±1%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCurrent Resolution\u003c\/td\u003e\n \u003ctd\u003e0.01 A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Capacity Range\u003c\/td\u003e\n \u003ctd\u003e1–6500Ah\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Input Range\u003c\/td\u003e\n \u003ctd\u003e8V–120V DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Input Resolution\u003c\/td\u003e\n \u003ctd\u003e10 mV\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCommunication\u003c\/td\u003e\n \u003ctd\u003eBluetooth LE and BLE Mesh\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Sensor Range\u003c\/td\u003e\n \u003ctd\u003e-20–80℃\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Sensor Accuracy\u003c\/td\u003e\n \u003ctd\u003e±1%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e14°F to 122°F (-10°C to 50°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Humidity\u003c\/td\u003e\n \u003ctd\u003e0%–95% RH\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Altitude\u003c\/td\u003e\n \u003ctd\u003eLess than 2000m above sea level\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Connection\u003c\/td\u003e\n \u003ctd\u003eM10 bolts\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInstallation\u003c\/td\u003e\n \u003ctd\u003eSurface mounting\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e5.27 x 3.82 x 1.22 in (134 x 97 x 31 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.57 lb (260 g)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded (Shunt-Only Variant)\u003c\/td\u003e\n \u003ctd\u003eBattery Shunt 300, Quick Guide, Mounting Screws (x3), B+ Wires 1 m \/ 22 AWG (x2), Temperature Sensor 1.5 m (x1)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Battery Shunt 300 suits overlanders, van builders, and off-grid cabin or trailer owners running 8–120V DC systems with lead-acid (AGM or GEL), lithium iron phosphate, lithium-ion, or nickel-metal hydride battery banks whose maximum continuous draw stays within 300A. Buyers who want wireless state-of-charge and temperature monitoring through the DC Home App, with or without the Renogy ONE Core hub, will find the shunt's Bluetooth LE connectivity and wide voltage range a practical fit for complex multi-component power systems.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Battery Shunt 300 is not compatible with the Renogy ONE M1. The shunt-only variant does not include the Renogy ONE Core; buyers who want integrated hub-based monitoring will need to add the Core separately or choose the bundled variant. Systems whose maximum continuous current exceeds 300A are outside the shunt's rated capacity.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat battery chemistries does the Battery Shunt 300 support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Battery Shunt 300 is compatible with lead-acid batteries (AGM and GEL), lithium iron phosphate (LFP), lithium-ion, and nickel-metal hydride batteries. The shunt does not require chemistry-specific programming. It calculates state of charge from current and voltage, and prompts for battery capacity during initial setup. Manual SOC calibration is also available after a full charge cycle.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the Battery Shunt 300 monitor a battery bank that draws more than 300A?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 300A rating on the Battery Shunt 300 is the shunt's maximum continuous current measurement capacity, not a restriction on total battery bank size. The shunt can monitor larger banks as long as the actual maximum continuous current flowing through the shunt stays at or below 300A. Calculate your circuit's peak continuous draw before installing to confirm compatibility.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box with the Battery Shunt 300?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe shunt-only variant of the Renogy Battery Shunt 300 includes the shunt unit, a quick guide, three mounting screws, two B+ wires (1 m, 22 AWG each), and one temperature sensor (1.5 m). The Renogy ONE Core is not included in the shunt-only variant; it is included in the bundled variant or available separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow is the Battery Shunt 300 installed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Battery Shunt 300 supports surface mounting: it can sit on top of the battery or be wall-mounted using the included screws. Battery terminals connect via M10 bolts. Connection points include protective covers to resist loosening from vibration. Installation completes in approximately 5 minutes.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Battery Shunt 300 compatible with the Renogy ONE M1?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Battery Shunt 300 is not currently compatible with the Renogy ONE M1. It is designed to work with the Renogy ONE Core and the DC Home App. Buyers using a Renogy ONE M1 hub should confirm compatibility with current firmware before purchasing.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Shunt Only","offer_id":50656316817478,"sku":"RSHST-B02P300-G1-US","price":120.99,"currency_code":"USD","in_stock":true},{"title":"With Renogy ONE Core","offer_id":50656316850246,"sku":"KIT-B02P300-W02W-US","price":292.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__91913.1707012265.1280.1280.jpg?v=1792208876"},{"product_id":"renogy-mounting-brackets-for-12v-100ah-pro-lifepo4-battery-set-of-4","title":"Renogy Mounting Brackets for 12V 100Ah Pro LiFePO4 Battery, Set of 4","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Mounting Bracket Set secures the Renogy 12V 100Ah Pro LiFePO4 Battery firmly against any mounting surface, resisting vibration in mobile, marine, and off-grid installations. Each set includes four fix brackets along with all screws and bolts needed for a complete installation. This bracket set is made exclusively for the Renogy 12V 100Ah Pro LiFePO4 Battery.\u003c\/p\u003e\n\n\u003ch2\u003eVibration Resistance Where It Counts\u003c\/h2\u003e\n\u003cp\u003eA battery that shifts or rattles under load puts stress on terminal connections and can cause intermittent faults at the worst possible moment: mid-trail or offshore. The Renogy Mounting Bracket Set clamps the 12V 100Ah Pro LiFePO4 Battery tight against its mounting surface, so the battery stays put over rough terrain and choppy water. Securing the battery at the bracket level also reduces mechanical wear on the battery case itself over time.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Hardware, No Sizing Guesswork\u003c\/h2\u003e\n\u003cp\u003eThe set ships with every fastener required: four fix brackets, eight ST4 mounting screws, and eight M4×10mm fix bolts. Having the matched hardware in one package means no separate trips to a hardware store to find compatible fasteners and no risk of using an undersized screw that backs out under vibration. Installation stays straightforward and the finished result keeps a clean, low-profile appearance alongside the battery.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMatched fitment:\u003c\/strong\u003e designed exclusively for the Renogy 12V 100Ah Pro LiFePO4 Battery\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eVibration resistance:\u003c\/strong\u003e holds the battery tight against the mounting surface to resist movement\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eComplete hardware included:\u003c\/strong\u003e 4 fix brackets, 8 ST4 mounting screws, and 8 M4×10mm fix bolts in one set\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMinimalist profile:\u003c\/strong\u003e low-profile bracket design for a clean installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eItem\u003c\/th\u003e\n \u003cth\u003eDetail\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible Battery\u003c\/td\u003e\n \u003ctd\u003eRenogy 12V 100Ah Pro LiFePO4 Battery\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBrackets Included\u003c\/td\u003e\n \u003ctd\u003e4 fix brackets\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eScrews Included\u003c\/td\u003e\n \u003ctd\u003e8 ST4 mounting screws\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBolts Included\u003c\/td\u003e\n \u003ctd\u003e8 M4×10mm fix bolts\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSet Weight\u003c\/td\u003e\n \u003ctd\u003e0.44 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis bracket set suits owners of the Renogy 12V 100Ah Pro LiFePO4 Battery who need a secure, vibration-resistant mount for overlanding rigs, vans, trailers, boats, or off-grid cabins where battery movement is a concern.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese brackets are not compatible with any other Renogy battery model or any third-party battery. They do not fit Renogy's 12V 100Ah Smart, Standard, or other LiFePO4 variants. Only the 12V 100Ah Pro is supported.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich battery does this bracket set fit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Mounting Bracket Set is made exclusively for the Renogy 12V 100Ah Pro LiFePO4 Battery. It is not designed to fit any other Renogy battery model, any other capacity, or any third-party battery, and Renogy does not list it as compatible with other variants in the 100Ah line.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat hardware is included in the set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach set of Renogy mounting brackets includes four battery fix brackets, eight ST4 mounting screws, and eight M4×10mm fix bolts. All fasteners needed to complete the installation are included; no additional hardware needs to be sourced separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does securing the battery with these brackets actually prevent?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Mounting Bracket Set holds the 12V 100Ah Pro LiFePO4 Battery firmly against its mounting surface, preventing the battery from shifting or vibrating during travel over rough terrain or in marine environments where wave motion would otherwise allow movement.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656327139398,"sku":"RMT12100BT-G1-US","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/100-Pro_01__78083.1714040581.1280.1280.jpg?v=1792208894"},{"product_id":"renogy-220w-400w-lightweight-portable-solar-panel-suitcase","title":"Renogy 220W \/ 400W Lightweight Portable Solar Panel Suitcase","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Lightweight Portable Solar Panel Suitcase is a foldable, kickstand-supported solar panel designed for overlanders, van dwellers, RV travelers, and off-grid cabin users who need deployable solar power without a permanent roof mount. The 400W variant weighs 30.2 lbs and folds to 27.9 × 33.7 × 3.2 in for transport; the 220W variant is lighter still at 15.87 lbs. Both variants use monocrystalline cells with ETFE coating and fiberglass reinforcement, and connect via IP68-rated solar connectors. A charge controller is required and sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eReady in One Minute, Built for Years of Field Use\u003c\/h2\u003e\n\u003cp\u003eThe suitcase format means setup is a matter of unfolding the panel, extending the aluminum kickstands, and plugging in. No tools, no roof work, no drilling. For an overlander who moves camp daily or a van traveler who parks in shifting sun, that speed matters: the panel goes from packed to producing without eating into the day. The rust-resistant aluminum kickstands hold the panel at a fixed angle for consistent output and fold flat against the panel for transport, so nothing rattles loose on rough roads.\u003c\/p\u003e\n\n\u003ch2\u003eETFE Coating and Fiberglass Reinforcement for Harsh Conditions\u003c\/h2\u003e\n\u003cp\u003eThe panel surface uses an ETFE (ethylene tetrafluoroethylene) coating rather than standard glass, which reduces weight while maintaining weather resistance. The fiberglass-reinforced frame adds structural rigidity and resistance to light hail and trail debris. Corner protection guards the most impact-prone edges during loading and unloading. The panel carries a protection rating of ≥IP67, meaning it is rated to resist dust ingress and temporary water immersion; the solar connectors themselves are rated IP68. Together these materials mean the panel can stay deployed through rain without being pulled. That is a real-world convenience on trips where weather changes fast.\u003c\/p\u003e\n\n\u003ch2\u003eParallel Wiring for Consistent Output in Partial Shade\u003c\/h2\u003e\n\u003cp\u003eThe 400W suitcase uses parallel wiring between its internal panel sections. In a series-wired panel, a shadow on one cell drags down output across the entire string; parallel wiring limits that effect so that a shadow on one section does not proportionally reduce the output of the others. For camp setups under trees or near a vehicle's shadow, this wiring approach sustains more usable power through the day than a single-string design would.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMonocrystalline cells:\u003c\/strong\u003e 400W variant rated at up to 23% cell efficiency\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eETFE coating:\u003c\/strong\u003e lightweight weather-resistant surface layer with enhanced durability over standard glass\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFiberglass reinforcement:\u003c\/strong\u003e structural frame rated to withstand light hailstorms\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP68 solar connectors \/ ≥IP67 panel protection:\u003c\/strong\u003e dust-tight and water-resistant for outdoor deployment\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAluminum kickstands:\u003c\/strong\u003e rust-resistant, fold flat for transport, deploy without tools\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eParallel wiring (400W):\u003c\/strong\u003e limits shade-induced output loss across panel sections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e400W\u003c\/th\u003e\n \u003cth\u003e220W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eShipping Weight\u003c\/td\u003e\n \u003ctd\u003e30.2 lbs (13.7 kg)\u003c\/td\u003e\n \u003ctd\u003e15.87 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003e≥IP67 (panel); IP68 (connectors)\u003c\/td\u003e\n \u003ctd\u003e≥IP67 (panel); IP68 (connectors)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSurface Coating\u003c\/td\u003e\n \u003ctd\u003eETFE\u003c\/td\u003e\n \u003ctd\u003eETFE\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFrame Material\u003c\/td\u003e\n \u003ctd\u003eFiberglass reinforced\u003c\/td\u003e\n \u003ctd\u003eFiberglass reinforced\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003e400W Variant: Full Electrical and Physical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Power at STC\u003c\/td\u003e\n \u003ctd\u003e400W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e47.2V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShort Circuit Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e11A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Voltage (Vmp)\u003c\/td\u003e\n \u003ctd\u003e40V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Current (Imp)\u003c\/td\u003e\n \u003ctd\u003e10A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum System Voltage\u003c\/td\u003e\n \u003ctd\u003e600VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Series Fuse Rating\u003c\/td\u003e\n \u003ctd\u003e15A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to 185°F \/ -40°C to 85°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eUnfolded Dimensions\u003c\/td\u003e\n \u003ctd\u003e111.8 × 33.7 × 0.8 in \/ 2838 × 855 × 20 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFolded Dimensions\u003c\/td\u003e\n \u003ctd\u003e27.9 × 33.7 × 3.2 in \/ 708 × 855 × 80 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e30.2 lbs \/ 13.7 kg\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Type\u003c\/td\u003e\n \u003ctd\u003eMonocrystalline\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003ctr\u003e\n \u003ctd\u003eWiring Configuration\u003c\/td\u003e\n \u003ctd\u003eParallel\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis solar suitcase suits overlanders, van travelers, RV users, and off-grid cabin owners who need portable, ground-deployable solar power that sets up without tools and packs away quickly. The 400W variant is sized for meaningful daily charging of house batteries or compatible portable power stations; the 220W variant suits lighter loads or weight-sensitive setups. Both work as a supplement to an existing solar system, provided the PV input voltage stays below the charge controller's rated solar input voltage.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eA charge controller is not included and is required for battery charging. The panel cannot connect directly to a battery without one. Pairing with a portable power station requires that the station's DC input voltage rating exceeds 48V; stations rated below that threshold are not compatible. Electrical specifications for the 220W variant are not fully confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this solar panel include a charge controller?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Lightweight Portable Solar Panel Suitcase does not include a charge controller. A charge controller is required to regulate current between the panel and a battery bank. The panel ships with the solar panel itself, a user manual, and an eWarranty card only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this panel connect directly to a portable power station?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Lightweight Portable Solar Panel Suitcase can pair with a compatible portable power station for plug-and-play charging, but the power station's DC input voltage rating must exceed 48V. Stations rated below that threshold are not compatible with this panel's output voltage.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat battery types can this panel charge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 400W Portable Solar Panel Suitcase is compatible with 12V lithium-ion, sealed lead-acid, flooded lead-acid, and gel batteries when paired with an appropriate charge controller. The charge controller must be matched to the panel's output voltage and the battery bank's voltage.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this solar panel waterproof enough for rain?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Lightweight Portable Solar Panel Suitcase carries a ≥IP67 panel protection rating, meaning it is rated for dust ingress resistance and temporary water immersion. The solar connectors are rated IP68. The ETFE coating and fiberglass reinforcement add further weather resistance, making the panel suitable for deployment in rain.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does parallel wiring help in partial shade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 400W Renogy Portable Solar Panel Suitcase uses parallel wiring between its internal panel sections. In a parallel configuration, a shadow falling on one section does not drag down output from the remaining sections the way it would in a series-wired design, so the panel sustains more usable output when part of its surface is shaded.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this panel be added to an existing solar system on an RV or shed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Lightweight Portable Solar Panel Suitcase can supplement an existing solar system. When doing so, the panel's PV input voltage must remain lower than the charge controller's rated solar input voltage to avoid damaging the controller or reducing system performance.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"400W","offer_id":50656344211526,"sku":"RSP400LSC-G1-US","price":495.99,"currency_code":"USD","in_stock":true},{"title":"220W","offer_id":50656344277062,"sku":"RSP220LSC-G2-US","price":320.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RSP400LSC__36865.1751960864.1280.1280.jpg?v=1792208945"},{"product_id":"renogy-12v-20a-40a-dc-to-dc-battery-charger","title":"Renogy 12V 20A\/40A DC to DC Battery Charger","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 12V DC to DC Battery Charger charges a 12V service battery from a 12V vehicle alternator, supporting both traditional alternators (13.2–16.0VDC input) and smart\/Euro 6 alternators (12–16.0VDC input) at up to 94% charging efficiency. Alternator-running detection protects the starter battery by preventing draw before the alternator is active. Two output ratings are available: 40A (584W output) and 20A.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Dual-Battery Rigs\u003c\/h2\u003e\n\u003cp\u003eIn a dual-battery setup, the service battery powers accessories (a fridge, lighting, a compressor) while the starter battery must stay reserved for the engine. The Renogy DC to DC Battery Charger enforces that separation automatically: its alternator-running detection circuit holds off charging until the alternator is confirmed active, so a long stop or a slow morning start never drains the starter battery through the service bank. That protection matters most on remote trips where a jump-start is not an option.\u003c\/p\u003e\n\n\u003ch2\u003eSmart Alternator Ready\u003c\/h2\u003e\n\u003cp\u003eModern vehicles with Euro 6 or variable-voltage smart alternators present a problem for simple battery-to-battery isolators: the alternator voltage drops too low for a direct connection to charge effectively. The Renogy DC to DC Battery Charger accepts smart alternator input down to 12V, converting and regulating it into a proper four-stage charge profile (bulk, constant voltage, float, and equalization) regardless of what the alternator is doing upstream. That makes it a direct fit for late-model trucks, vans, and SUVs that would otherwise leave the service battery undercharged on long drives.\u003c\/p\u003e\n\n\u003ch2\u003eQuieter Operation and Corrosion-Resistant Build\u003c\/h2\u003e\n\u003cp\u003eNatural heat dissipation reduces fan noise to 30dB, keeping the charger quiet in enclosed van builds or cabin installs. The corrosion-resistant enclosure is suited for humid environments including marine applications. When temperatures climb, the charger automatically reduces output power rather than shutting down, maintaining safe operation across an operating range of -25°C to 60°C (-4°F to 122°F).\u003c\/p\u003e\n\n\u003ch2\u003eLithium Battery Activation Control\u003c\/h2\u003e\n\u003cp\u003eFor lithium iron phosphate service batteries, the charger includes a Li Battery Activation On\/Off setting adjustable through the DC Home app. Enabling this activation for a deeply discharged lithium battery and disabling it once the battery is healthy helps extend lithium cell lifespan. Temperature compensation is set to 0mV\/°C\/2V for lithium (no compensation), and -3mV\/°C\/2V for non-lithium battery types.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAlternator-running detection:\u003c\/strong\u003e holds charging until alternator is confirmed active, protecting the starter battery\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSmart alternator compatibility:\u003c\/strong\u003e accepts 12–16.0VDC input from Euro 6 and variable-voltage alternators\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e94% charging efficiency\u003c\/strong\u003e at up to 40A output (584W) on the 40A variant\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFour-stage charging logic:\u003c\/strong\u003e bulk, constant voltage, float, and equalization stages\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLi Battery Activation On\/Off:\u003c\/strong\u003e adjustable via DC Home app for lithium iron phosphate batteries\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIncluded battery temperature sensor (2m):\u003c\/strong\u003e enables real-time temperature-compensated charging adjustments\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant, compact enclosure\u003c\/strong\u003e suited for humid and marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e40A Variant (RBC40D1U)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Voltage\u003c\/td\u003e\n \u003ctd\u003e12V–12V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTraditional Alternator Input\u003c\/td\u003e\n \u003ctd\u003e13.2–16.0VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSmart Alternator Input (Euro 6)\u003c\/td\u003e\n \u003ctd\u003e12–16.0VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Output Current\u003c\/td\u003e\n \u003ctd\u003e40A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Power\u003c\/td\u003e\n \u003ctd\u003e584W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharging Efficiency\u003c\/td\u003e\n \u003ctd\u003e94%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInput Fuse Rating\u003c\/td\u003e\n \u003ctd\u003e60A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Fuse Rating\u003c\/td\u003e\n \u003ctd\u003e50A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Range\u003c\/td\u003e\n \u003ctd\u003e10AWG–8AWG \/ 8AWG–6AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eGrounding\u003c\/td\u003e\n \u003ctd\u003eCommon Negative\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n \u003ctd\u003eRS485 (BT-2 module sold separately)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-25°C to 60°C (-4°F to 122°F)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHumidity\u003c\/td\u003e\n \u003ctd\u003e0%–95%, no condensation\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Operating Altitude\u003c\/td\u003e\n \u003ctd\u003e3000m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e9.31 × 6.00 × 2.30 in (236.5 × 152.5 × 58.4 mm)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e4.14 lb (1.88 kg)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;15mA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eCE \/ RoHS \/ FCC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtections\u003c\/td\u003e\n \u003ctd\u003eReverse polarity, overvoltage, over-discharge, overcurrent, over-temperature\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Includes\u003c\/td\u003e\n \u003ctd\u003eBattery charger ×1, battery temperature sensor 2m ×1, IGN signal wire 3m ×1, terminal ring ×4, user manual ×1\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003e20A Variant (RBC20D1U)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Output Current\u003c\/td\u003e\n \u003ctd\u003e20A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e3.54 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis charger suits overlanders, van builders, RV owners, and marine users running a 12V dual-battery system who need to charge a service battery from a vehicle alternator (including late-model vehicles with smart or Euro 6 variable-voltage alternators). It supports AGM, gel, flooded, sealed lead-acid, and lithium iron phosphate service batteries.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis charger is a 12V-to-12V device and is not designed for 24V systems. Bluetooth monitoring requires the BT-2 module, which is sold separately and is not included. Full electrical specifications for the 20A variant are not available in this listing beyond its 20A output current rating; buyers sizing wire gauges, fuses, or enclosures for the 20A variant should refer to Renogy's published documentation before installation.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre there installation precautions I should follow?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy DC to DC Battery Charger should be mounted horizontally to improve venting and heat dissipation. Positioning the charger close to the service battery (rather than the starter battery) is also recommended for best performance.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat battery types does this charger support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy DC to DC Battery Charger supports AGM, flooded lead-acid, gel, sealed lead-acid, and lithium iron phosphate 12V batteries by default. A custom mode is also available, allowing charging parameters to be adjusted for batteries with specific requirements beyond the preset profiles.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this charger include Bluetooth monitoring?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy DC to DC Battery Charger has an RS485 communication port that supports Bluetooth monitoring, but Bluetooth capability requires the separately sold Renogy BT-2 module. Once the BT-2 is connected, the DC Home app provides remote monitoring and records up to 365 days of system data.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes it work with smart alternators in late-model vehicles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy DC to DC Battery Charger (40A variant) accepts smart alternator input from 12–16.0VDC, covering Euro 6 and variable-voltage alternators that drop below the threshold a simple isolator needs. Traditional alternators operating at 13.2–16.0VDC are also supported.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat charging stages does the charger use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy DC to DC Battery Charger uses a four-stage charging sequence: bulk charge, constant voltage, float, and equalization. These stages work together to charge the service battery efficiently and avoid overcharging, which can shorten battery lifespan over time.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"40A","offer_id":50656410435654,"sku":"RBC40D1U-G3-US","price":186.99,"currency_code":"USD","in_stock":true},{"title":"20A","offer_id":50656410468422,"sku":"RBC20D1U-G2-US","price":140.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RBC40D1U-01.jpg?v=1792209067"},{"product_id":"renogy-1000w-12v-pure-sine-wave-inverter-with-ups-and-bluetooth","title":"Renogy 1000W 12V Pure Sine Wave Inverter with UPS and Bluetooth","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 1000W 12V Pure Sine Wave Inverter converts 12V DC battery power to 120V AC at 1000W continuous output (2000W surge for 2 seconds), with a built-in UPS transfer switch that automatically switches between shore power and battery-backed inverter output to keep connected devices running without interruption. Built-in Bluetooth pairs with the DC Home app for real-time monitoring of voltage, current, and power, and an included wired remote control with a 16.40-foot cable allows operation from up to 16 feet away. Thermally controlled cooling fans, over-voltage, over-current, and short-circuit protection, and a noise level below 51dB complete the package.\u003c\/p\u003e\n\n\u003ch2\u003eUninterrupted Power with the UPS Transfer Switch\u003c\/h2\u003e\n\u003cp\u003eThe UPS transfer switch automatically switches between shore power and battery-backed inverter output when the AC source is interrupted or restored. For an RV connected to a campground pedestal, a van plugged into a garage outlet, or a semi-truck at a rest stop, this means sensitive electronics (laptops, CPAP machines, small refrigerators) keep running through the transition rather than shutting down abruptly. The transfer switch is rated at 10A, which sets the ceiling for the shore-power pass-through load; plan connected loads accordingly when sizing the shore connection.\u003c\/p\u003e\n\n\u003ch2\u003ePure Sine Wave Output at Over 92% Efficiency\u003c\/h2\u003e\n\u003cp\u003eThe inverter's pure sine wave output carries total harmonic distortion at or below 3%, which is cleaner than grid power (up to 5% THD) and substantially cleaner than modified sine wave inverters (20–40% THD). Inductive loads such as motors, compressors, and microwave ovens run cooler, quieter, and more efficiently on a pure sine wave, and sensitive electronics such as audio equipment and variable-speed tools operate without the interference or buzzing that a modified sine wave can introduce. Inverter efficiency exceeds 92%, full-load efficiency exceeds 87%, and idle power consumption stays below 12W, which matters when the system is on standby for extended periods.\u003c\/p\u003e\n\n\u003ch2\u003eMonitor and Control from Your Phone or the Wired Remote\u003c\/h2\u003e\n\u003cp\u003eBuilt-in Bluetooth connects the inverter to the DC Home app on a smartphone, providing real-time data on output power, voltage, and current levels without opening an enclosure or reading a panel display. The included wired remote control has a 16.40-foot cable and a front plate measuring 4.3 × 2.6 × 1.3 inches, so the inverter can be mounted in a compartment or under a bed platform while the on\/off switch and status display remain accessible at a convenient location in the cabin or cab.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e1000W continuous \/ 2000W surge:\u003c\/strong\u003e handles sustained loads up to 1000W and brief startup surges up to 2000W for 2 seconds\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUPS transfer switch (10A rated):\u003c\/strong\u003e automatically switches between shore power and battery-backed inverter output without interrupting connected loads\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePure sine wave output:\u003c\/strong\u003e THD ≤3%, 120V AC ±3%, selectable 50\/60Hz output frequency\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bluetooth:\u003c\/strong\u003e pairs with the DC Home app for real-time voltage, current, and power monitoring\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThermally controlled cooling fans:\u003c\/strong\u003e fan speed adjusts to internal temperature; operating noise below 51dB\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-layer protection:\u003c\/strong\u003e over-voltage, over-current, and short-circuit protection with automatic shutdown and alarm thresholds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eModel\u003c\/td\u003e\n \u003ctd\u003eRIV1210PU-126\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContinuous Output Power\u003c\/td\u003e\n \u003ctd\u003e1000W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSurge Rating\u003c\/td\u003e\n \u003ctd\u003e2000W (@ 2s)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Waveform\u003c\/td\u003e\n \u003ctd\u003ePure Sine Wave\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Voltage\u003c\/td\u003e\n \u003ctd\u003e120V AC ±3%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Frequency\u003c\/td\u003e\n \u003ctd\u003e50\/60Hz\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContinuous Output Current\u003c\/td\u003e\n \u003ctd\u003e8.3A AC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTotal Harmonic Distortion (THD)\u003c\/td\u003e\n \u003ctd\u003e≤3%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Battery Input Voltage\u003c\/td\u003e\n \u003ctd\u003e12VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Input Voltage Range\u003c\/td\u003e\n \u003ctd\u003e11–15.5VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Continuous Battery Output Current\u003c\/td\u003e\n \u003ctd\u003e105A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInverter Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;92%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFull Load Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;87%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;12W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTransfer Switch Rating\u003c\/td\u003e\n \u003ctd\u003e10A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Overvoltage Shutdown\u003c\/td\u003e\n \u003ctd\u003e16.0VDC ±0.3VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Low Voltage Alarm\u003c\/td\u003e\n \u003ctd\u003e11.0VDC ±0.3VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Low Voltage Shutdown\u003c\/td\u003e\n \u003ctd\u003e10.5VDC ±0.3VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eAC Terminals\u003c\/td\u003e\n \u003ctd\u003e2 × AC Sockets + Terminal Block\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDC Terminals\u003c\/td\u003e\n \u003ctd\u003eM8-25\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCooling\u003c\/td\u003e\n \u003ctd\u003eThermally Controlled Fans\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eNoise Level\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;51dB\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n \u003ctd\u003eIP20\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-4°F ~ 113°F \/ -20°C ~ 45°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F ~ 158°F \/ -40°C ~ 70°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHumidity\u003c\/td\u003e\n \u003ctd\u003eMax 95%, Non-condensing\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n \u003ctd\u003e15.3 × 8.1 × 3.8 in \/ 388.5 × 205.4 × 95.3 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e3.7 kg \/ 8.2 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRegulatory\u003c\/td\u003e\n \u003ctd\u003eUL458, FCC Part 15 Class B\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIn the Box\u003c\/td\u003e\n \u003ctd\u003e1000W 12V Pure Sine Wave Inverter, 4AWG 3ft inverter cables (pair), wired remote control (16.40ft cable), 5m RJ12 ethernet cable, user manual\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis inverter suits overlanders, van builders, RV owners, and semi-truck operators running a 12V house battery bank who need clean AC power for laptops, CPAP machines, power tools, small appliances, or audio equipment up to 1000W continuous. The UPS transfer switch makes it a practical fit for anyone who alternates between shore power and battery power and needs connected devices to remain on through the transition.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe IP20 enclosure rating means this inverter requires a dry, enclosed installation with adequate ventilation clearance (at least 1.97 inches above the top and 4 inches on the busbar side) and is not rated for outdoor or exposed mounting. The UPS transfer switch is rated at 10A, so it is not suited for passing through high-amperage shore loads. Total connected AC load must not exceed 1000W; inductive appliances with high startup currents such as large air conditioners may trip the inverter if their peak demand exceeds the 2000W surge rating.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between a pure sine wave inverter and a modified sine wave inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 1000W pure sine wave inverter produces an AC output with total harmonic distortion at or below 3%, which is cleaner than grid power (up to 5% THD). Modified sine wave inverters typically produce 20–40% THD, which can cause motors and inductive loads to run hotter and noisier and can interfere with sensitive electronics. The pure sine wave output is compatible with a broader range of appliances, including variable-speed tools and audio equipment.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this inverter operate both on-grid and off-grid?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 1000W 12V pure sine wave inverter supports both on-grid and off-grid operation. When shore power is available, the UPS transfer switch passes it through to connected loads. When shore power is interrupted or unavailable, the inverter automatically switches to battery-backed AC output, keeping connected devices running through the transition without manual intervention.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the built-in Bluetooth work with this inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 1000W inverter's built-in Bluetooth connects to the DC Home app on a smartphone, providing real-time monitoring of output power, voltage, and current levels. This allows the inverter to be mounted in a compartment or enclosure while the operator checks system status from a phone, without needing physical access to the unit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat installation clearance does this inverter need?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 1000W inverter requires at least 1.97 inches of clearance above the top of the unit and at least 4 inches of clearance on the side with the busbars. The IP20 enclosure rating means the inverter must be installed in a dry, enclosed space with adequate airflow and is not rated for outdoor or exposed mounting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy might appliances trip when connected to this inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eTripping on the Renogy 1000W inverter can result from exceeding the 1000W continuous load limit when multiple appliances run simultaneously, from inductive loads such as refrigerators, air conditioners, or microwave ovens drawing high startup currents that exceed the surge rating, from a short circuit in a connected appliance, or from loose wiring connections. Keeping total connected load below 1000W and accounting for inductive startup peaks reduces the likelihood of nuisance trips.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656430161990,"sku":"RIV1210PU-126-G1-US","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RIV1210PU-126_84f2b7fd-bf6c-4469-8fc1-744343683699.png?v=1792209098"},{"product_id":"renogy-rego-30a-mppt-solar-charge-controller","title":"Renogy REGO 30A MPPT Solar Charge Controller","description":"\u003cp class=\"product-lead\"\u003eThe Renogy REGO 30A MPPT Solar Charge Controller is a multi-voltage solar charge controller for 12V, 24V, 36V, and 48V battery systems, rated for a 30A charge current and up to 150V open-circuit solar input. With greater than 99% MPPT tracking efficiency and greater than 97% conversion efficiency, the REGO 30A suits RV, van, off-grid cabin, and overlanding builds where maximizing harvest from a solar array is the priority.\u003c\/p\u003e\n\n\u003ch2\u003eHarvest More Power from Every Panel Configuration\u003c\/h2\u003e\n\u003cp\u003eThe REGO 30A accepts up to 150V open-circuit solar input, which means panels can be wired in series, parallel, or a series-parallel combination rather than being forced into a single low-voltage string. For a 12V battery bank the controller handles up to 440W of solar input; for a 24V bank, up to 880W; for a 36V bank, up to 1,314W; and for a 48V bank, up to 1,700W. That headroom lets a builder add panels incrementally without replacing the controller, and the Power Catcher MPPT algorithm continuously locks to the maximum power point as sunlight and temperature shift through the day.\u003c\/p\u003e\n\n\u003ch2\u003eMonitor and Manage from the DC HOME App\u003c\/h2\u003e\n\u003cp\u003eBuilt-in Bluetooth and RV-C connectivity let the REGO 30A communicate with the Renogy DC HOME app and RV-C-compatible displays without a separate adapter. A real-time clock logs up to a full year of power-generation data, so daily and seasonal performance trends are available for review rather than estimated. Over-the-air firmware updates can be applied remotely, and a rollback mechanism is included for recovery if an update fails.\u003c\/p\u003e\n\n\u003ch2\u003eStable Output in Heat and at Altitude\u003c\/h2\u003e\n\u003cp\u003eThe REGO 30A delivers its full 30A charge current at an ambient temperature of 45°C (113°F) and at altitudes up to 3,000 meters, conditions common in desert overlanding and high-elevation basecamp use. Heat dissipation is handled by an integrated heat sink rather than a fan, reducing moving parts. The enclosure carries an IP43 rating, providing protection against solid objects larger than 1mm and water spray up to 60° from vertical, suitable for protected indoor or enclosed-compartment mounting in humid environments.\u003c\/p\u003e\n\n\u003ch2\u003eError-Proof Wiring and Broad Battery Compatibility\u003c\/h2\u003e\n\u003cp\u003eAmphenol connectors and IP67-rated solar connectors are used at the panel input, designed to seat positively and resist loosening or slipping under vibration. The controller auto-detects battery voltage across the 8V–64V operating range, eliminating manual voltage selection for non-lithium banks. Battery type is selected via a front-panel button or the DC HOME app, covering AGM, Gel, SLD (sealed lead-acid), FLD (flooded), lithium (four cell groups), and a User mode for custom charge profiles. A battery temperature sensor is included in the box for temperature-compensated charging of non-lithium batteries.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e30A rated charge current:\u003c\/strong\u003e supports up to 1,700W solar input on a 48V battery system\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e150V max open-circuit solar input:\u003c\/strong\u003e enables series, parallel, and series-parallel panel wiring\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in Bluetooth and RV-C:\u003c\/strong\u003e connects to the DC HOME app and RV-C displays without an external adapter\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eReal-time clock with year-long data log:\u003c\/strong\u003e records daily generation history for performance review\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e13 built-in protection features:\u003c\/strong\u003e includes low-temperature protection and customizable settings\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP43 enclosure, IP67 solar connectors:\u003c\/strong\u003e rated for humid and splash-prone environments\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOTA firmware updates:\u003c\/strong\u003e remote software upgrades with rollback mechanism\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Charge Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Voltage\u003c\/td\u003e\n \u003ctd\u003e12V \/ 24V \/ 36V \/ 48V (auto recognition, non-lithium)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Operating Voltage Range\u003c\/td\u003e\n \u003ctd\u003e8V to 64V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e150VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Power (12V Battery)\u003c\/td\u003e\n \u003ctd\u003e440W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Power (24V Battery)\u003c\/td\u003e\n \u003ctd\u003e880W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Power (36V Battery)\u003c\/td\u003e\n \u003ctd\u003e1,314W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Power (48V Battery)\u003c\/td\u003e\n \u003ctd\u003e1,700W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMPPT Tracking Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;99%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConversion Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;97%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Consumption (12V \/ 24V \/ 36V \/ 48V)\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;0.57W \/ \u0026lt;0.67W \/ \u0026lt;0.97W \/ \u0026lt;1.34W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Compensation\u003c\/td\u003e\n \u003ctd\u003e3mV\/°C\/2V (non-lithium); 0mV\/°C\/2V (lithium)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharger Algorithm, Lead Acid\u003c\/td\u003e\n \u003ctd\u003e3-stage: Bulk, Boost, Float, Equalize*\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharger Algorithm, Lithium\u003c\/td\u003e\n \u003ctd\u003e2-stage: Bulk, Boost\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSupported Battery Types\u003c\/td\u003e\n \u003ctd\u003eAGM, Gel, SLD, FLD, LI (four cell groups), User Mode\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCommunication\u003c\/td\u003e\n \u003ctd\u003eBluetooth (built-in), RV-C, RS485, Renogy CAN\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eGrounding\u003c\/td\u003e\n \u003ctd\u003eCommon Negative\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n \u003ctd\u003eIP43\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCooling\u003c\/td\u003e\n \u003ctd\u003eHeat Sink\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-31°F to 149°F \/ -35°C to 65°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-31°F to 176°F \/ -35°C to 80°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHumidity\u003c\/td\u003e\n \u003ctd\u003e0%–95% RH\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (without solar connector)\u003c\/td\u003e\n \u003ctd\u003e9.84 × 7.40 × 3.17 in \/ 250 × 188 × 80 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (with solar connector)\u003c\/td\u003e\n \u003ctd\u003e9.84 × 8.58 × 3.17 in \/ 250 × 218 × 80 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e2.7 kg \/ 5.95 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eFCC, RoHS, CE, SAA, RCM, UL 1741\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIn the Box\u003c\/td\u003e\n \u003ctd\u003eSolar Charge Controller, Quick Guide, Battery Temperature Sensor, Mounting Screws (×4)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe REGO 30A is suited to RV, van conversion, overlanding trailer, and off-grid cabin solar builds running 12V, 24V, 36V, or 48V battery banks, particularly where panels are wired in series to exceed 18V open-circuit or where a single controller must handle up to 1,700W of array input. Builders who want app-based monitoring and RV-C bus integration without a separate Bluetooth module will benefit from the built-in connectivity.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe REGO 30A does not include a load output terminal for directly powering DC loads from the controller; a separate load distribution solution is required. No fuse is included: a 30A ANL fuse (sold separately) must be installed between the controller and the battery bank. The IP43 enclosure rating is not suitable for direct outdoor exposure. The unit requires a sheltered or enclosed mounting location such as inside a van, trailer, or equipment compartment.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan panels be wired in series with the REGO 30A?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe REGO 30A MPPT Solar Charge Controller accepts up to 150V open-circuit solar input, so panels can be wired in series, parallel, or a series-parallel combination. The only constraint is that the combined open-circuit voltage of the string must not exceed 150VDC.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow much solar can the REGO 30A handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eMaximum solar input power depends on battery bank voltage: 440W for a 12V system, 880W for a 24V system, 1,314W for a 36V system, and 1,700W for a 48V system. The rated charge current into the battery is 30A regardless of system voltage.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the REGO 30A work with lithium batteries?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe REGO 30A Solar Charge Controller supports lithium battery types across four cell groups using a 2-stage Bulk\/Boost algorithm. Battery type is selected via the front-panel button or the DC HOME app. Temperature compensation is set to 0mV\/°C for lithium, meaning no temperature-based voltage adjustment is applied.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs a fuse included, and where does it go?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo fuse is included with the REGO 30A. A fuse must be installed in the wiring between the charge controller and the battery bank. For a 30A controller, a 30A ANL fuse is the appropriate size; the fuse is sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the built-in Bluetooth connect to?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe REGO 30A's built-in Bluetooth connects to the Renogy DC HOME app, which displays real-time power generation data and allows battery type selection and other settings to be adjusted remotely. The controller also supports RV-C communication for integration with compatible RV monitoring systems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhere can the REGO 30A be mounted?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe REGO 30A carries an IP43 enclosure rating, which provides protection against solid objects larger than 1mm and water spray up to 60° from vertical. The unit is suited to sheltered or enclosed locations such as inside a van, trailer, or equipment compartment, rather than direct outdoor exposure. Four mounting screws are included.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656454344774,"sku":"RCC30REGO-G1-US","price":430.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RCC30REGO_01__59487.1735631705.1280.1280.jpg?v=1792209147"},{"product_id":"renogy-300a-nickel-plated-brass-busbar-for-48v-dc-systems","title":"Renogy 300A Nickel-Plated Brass Busbar for 48V DC Systems","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 300A Busbar is a surface-mountable electrical distribution block rated for up to 300A continuous current and 48V DC, built from nickel-plated brass bus contacts set in a glass-fiber-reinforced nylon housing. Available in red (positive) and black (negative) versions, each busbar ships with four M4×15mm fixing bolts and four M5×33mm round-head Phillips screws for direct panel or surface mounting in any orientation.\u003c\/p\u003e\n\n\u003ch2\u003eConductivity Without Corrosion\u003c\/h2\u003e\n\u003cp\u003eThe bus contacts and hex nuts are machined from brass and finished with a nickel plating. Brass carries current efficiently at high amperage; the nickel layer resists oxidation that would otherwise increase contact resistance over time in the damp, vibration-prone environments common to overlanding rigs, vans, and marine installations. Corroded busbars are a common source of voltage drop and heat buildup in high-draw systems, and the nickel finish addresses that directly.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible, Labeled Wiring in a Compact Housing\u003c\/h2\u003e\n\u003cp\u003eThe busbar housing is designed with removable windows on the sides, allowing wire runs to enter from multiple directions without sharp bends or forced routing. A blank writing surface at the top of the housing lets installers label each branch circuit directly on the busbar, which is useful when tracing a fault or adding a circuit months after the initial build. The non-slip sponge pad on the base reduces vibration transfer and keeps the unit stable on a flat surface before fasteners are fully torqued.\u003c\/p\u003e\n\n\u003ch2\u003eSurface-Mount in Any Orientation\u003c\/h2\u003e\n\u003cp\u003eFour included fixing screws allow the busbar box to be mounted flat on a panel, sidewall, or bulkhead in any direction: horizontal, vertical, or inverted. The glass-fiber-reinforced nylon housing provides mechanical strength without adding significant weight, as the complete unit weighs 0.882 lb. This makes the busbar practical for tight battery compartments in truck builds and van conversions where every inch of clearance matters.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eNickel-plated brass contacts:\u003c\/strong\u003e high conductivity with corrosion resistance for long-term reliability\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e300A continuous current rating at 48V DC:\u003c\/strong\u003e supports high-draw house battery and solar distribution applications\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRemovable side windows:\u003c\/strong\u003e allow flexible, barrier-free wire routing from multiple directions\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLabeled writing surface:\u003c\/strong\u003e blank space at top for marking individual branch circuits\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNon-slip sponge base:\u003c\/strong\u003e reduces vibration and increases stability on flat surfaces\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSurface-mountable in any direction:\u003c\/strong\u003e four fixing screws included for panel, wall, or bulkhead installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Continuous Current\u003c\/td\u003e\n \u003ctd\u003e300A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Voltage\u003c\/td\u003e\n \u003ctd\u003e48V DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBus \/ Hex Nut Material\u003c\/td\u003e\n \u003ctd\u003eBrass, nickel-plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBase \u0026amp; Cover Material\u003c\/td\u003e\n \u003ctd\u003eNylon, glass fiber reinforced\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e5.43 × 2.72 × 1.81 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.882 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded Hardware\u003c\/td\u003e\n \u003ctd\u003eM4×15mm fix bolts ×4, M5×33mm round-head Phillips screws ×4\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e1 year material and workmanship\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis busbar suits overlanders, van builders, and marine or off-grid cabin installers who need a compact, labeled distribution point for a 12V, 24V, or 48V DC house battery system drawing up to 300A continuous. It is available in red (positive rail) and black (negative rail) so both sides of a distribution block can be matched.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis busbar is rated for DC systems up to 48V only and is not rated for AC wiring. It is a distribution block with no built-in overcurrent protection; branch circuit fusing must be handled separately. The 300A rating applies to the busbar itself, and wire gauge and terminal torque must be sized to match by the installer.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow is the Renogy 300A Busbar mounted?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 300A Busbar is surface-mounted using four M5×33mm round-head Phillips screws included in the package. The housing can be fixed to a panel, sidewall, or bulkhead in any orientation (horizontal, vertical, or inverted), making it adaptable to tight battery compartments in truck builds, vans, and trailers.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the maximum current and voltage this busbar handles?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 300A Busbar is rated for a maximum continuous current of 300A and a maximum voltage of 48V DC. It is not rated for AC circuits. Installers should size wire gauge and terminal connections to match the busbar's rating and the demands of their specific system.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the busbar include overcurrent protection?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 300A Busbar is a distribution block, not a fuse block. It does not include fuses, breakers, or any built-in overcurrent protection. Each branch circuit connected to the busbar should be protected by an appropriately rated fuse or breaker installed separately between the busbar and the load.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy does the busbar come in red and black versions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 300A Busbar is sold separately in red and black to allow installers to designate a positive distribution rail (red) and a negative distribution rail (black) in a DC system. Using color-coded busbars reduces wiring errors and makes the system easier to trace during maintenance or troubleshooting.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat do the removable windows on the housing do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe removable side windows on the Renogy 300A Busbar housing allow wire runs to enter the enclosure from multiple directions without forcing sharp bends. Installers can open only the windows needed for their specific wire routing, keeping unused openings closed to reduce the chance of debris contact with the terminals.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Red","offer_id":50656454770758,"sku":"RPD300RBB-G1-US","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":50656454803526,"sku":"RPD300BBB-G1-US","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/61029_source_1724642991.jpg?v=1792209152"},{"product_id":"renogy-12-way-battery-terminal-distribution-block-pair","title":"Renogy 12-Way Battery Terminal Distribution Block Pair","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 12-Way Battery Terminal Distribution Block is a zinc alloy bus bar designed to expand a single battery post into 12 connection points: 6 hole-holders and 6 threaded studs, with a 400A current carrying capacity per terminal. It accepts wire sizes from 8 AWG through 4\/0 AWG and is compatible with lithium, AGM, MF, GEL, WET, and CA\/CA lead-acid batteries. This listing is sold as a pair of terminal blocks.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Connections for Complex Builds\u003c\/h2\u003e\n\u003cp\u003eRunning multiple loads or batteries off a single terminal creates crowded, unreliable connections. The 12-way layout gives each cable its own dedicated seat: hole-holders for ring-terminal lugs and threaded studs for nut-secured connections, so every circuit gets a clean, mechanically secure attachment point. For overlanding rigs, vans, or trailer builds where a house battery feeds a charge controller, inverter, DC-DC charger, fuse block, and auxiliary loads simultaneously, having 12 discrete connection points per terminal removes the need for daisy-chaining or stacking ring terminals on a single stud.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Handle High-Current Loads\u003c\/h2\u003e\n\u003cp\u003eZinc alloy construction gives the terminal block corrosion resistance alongside the structural rigidity needed to handle large-gauge cable terminations up to 4\/0 AWG without deforming under torque. The 400A continuous current carrying capacity per terminal means the block itself is not the limiting factor in most 12V house-battery systems, leaving headroom for the wiring and fusing to do their jobs without the terminal becoming a bottleneck or heat source.\u003c\/p\u003e\n\n\u003ch2\u003eSeries and Parallel Battery Configurations\u003c\/h2\u003e\n\u003cp\u003eThe 12 connection points per block support both series and parallel battery wiring arrangements, making the terminal blocks useful whether a build uses a single large-capacity battery or a multi-battery bank. The pair format means both the positive and negative sides of a battery bank can be terminated with matching hardware, keeping the installation symmetrical and the current paths balanced.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eZinc alloy construction:\u003c\/strong\u003e corrosion-resistant material suited to mobile and marine environments\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e12 connection points per block:\u003c\/strong\u003e 6 hole-holders and 6 threaded studs on each terminal\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e400A current carrying capacity:\u003c\/strong\u003e per terminal block\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide wire range:\u003c\/strong\u003e accepts 8 AWG through 4\/0 AWG cable sizes\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-chemistry compatible:\u003c\/strong\u003e works with lithium, AGM, MF, GEL, WET, and CA\/CA lead-acid batteries\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaterial\u003c\/td\u003e\n \u003ctd\u003eZinc alloy\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConnection points per block\u003c\/td\u003e\n \u003ctd\u003e12 (6 hole-holders, 6 threaded studs)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCurrent carrying capacity\u003c\/td\u003e\n \u003ctd\u003e400A per terminal\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible wire sizes\u003c\/td\u003e\n \u003ctd\u003e8 AWG to 4\/0 AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible battery types\u003c\/td\u003e\n \u003ctd\u003eLithium, AGM, MF, GEL, WET, CA\/CA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage dimensions\u003c\/td\u003e\n \u003ctd\u003e3.54 × 1.57 × 1.06 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage weight\u003c\/td\u003e\n \u003ctd\u003e1.5 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese terminal distribution blocks suit overlanders, van builders, RV owners, and marine or trailer installers who need to connect multiple large-gauge cables to a single battery post cleanly and securely. They work with any 12V system using lithium or lead-acid chemistry where the wiring demands more connection points than a standard battery terminal provides.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese blocks do not include fusing. They are distribution points only, not a fused bus bar. Wire sizing, fusing, and system protection remain the installer's responsibility. No IP or ingress-protection rating is stated for this product, so suitability for fully exposed or submerged installations cannot be confirmed.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many cables can each terminal block accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Renogy 12-Way Battery Terminal Distribution Block accepts up to 12 cables per block (6 through hole-holders and 6 via threaded studs) with a current carrying capacity of 400A per terminal. Both connection types accommodate wire sizes from 8 AWG through 4\/0 AWG.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauges fit the hole-holders and threaded studs?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth the hole-holders and the threaded studs on the Renogy terminal distribution block accept wire sizes ranging from 8 AWG to 4\/0 AWG. Detailed torque and installation specifications are provided in the included instructions.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this terminal block compatible with lithium batteries?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy 12-Way Battery Terminal Distribution Block is compatible with lithium batteries as well as lead-acid types including AGM, MF, GEL, WET, and CA\/CA. It functions as a passive distribution point and does not interact with battery chemistry directly.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes this block include built-in fusing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Renogy 12-Way Battery Terminal Distribution Block is a passive distribution terminal. It does not include fuses, circuit breakers, or overcurrent protection. Fusing must be installed separately in the wiring between the battery and the distribution block, per standard electrical installation practice.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat applications is this terminal block designed for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12-Way Battery Terminal Distribution Block is suited for RVs, SUVs, trucks, cars, houseboats, motorcycles, cranes, and forklifts. It is designed for any installation where a single battery post needs to feed multiple large-gauge cable runs simultaneously.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656461848646,"sku":"ROA03TB-G1-US","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1__27069.1724858979.1280.1280.jpg?v=1792209179"},{"product_id":"renogy-mrbf-terminal-fuse-for-solar-and-battery-systems","title":"Renogy MRBF Terminal Fuse for Solar and Battery Systems","description":"\u003cp class=\"product-lead\"\u003eThe Renogy MRBF Terminal Fuse is a compact, bolt-on circuit protection fuse rated up to 58V and available in amperage ratings from 30A to 400A, designed to mount directly to a battery's positive terminal copper plate and protect solar, RV, van, and off-grid electrical systems from overcurrent faults. The fuse body measures 23.5×20×11.5 mm and ships with an M8 terminal bolt. Eleven amperage options let builders size protection to match their system's wire gauge and load.\u003c\/p\u003e\n\n\u003ch2\u003eDirect Terminal Mounting Simplifies the Protection Circuit\u003c\/h2\u003e\n\u003cp\u003eThe MRBF fuse bolts directly to the positive terminal's copper plate through a 5\/16\" \/ M8 mounting hole, placing overcurrent protection at the battery itself rather than downstream in the wiring run. Locating the fuse at the source means a short anywhere in the circuit is interrupted before current can travel far enough to damage wiring, components, or the battery. The integrated design also removes the need for a separate inline fuse holder and its associated connections, reducing potential failure points in the circuit.\u003c\/p\u003e\n\n\u003ch2\u003eCeramic Body Handles High Interrupt Currents\u003c\/h2\u003e\n\u003cp\u003eThe MRBF fuse uses a ceramic insulating body, a material chosen for its ability to contain the arc energy released during a high-current fault. The interrupt rating (10,000A at 14VDC, 5,000A at 32VDC, and 2,000A at 58VDC) reflects the fuse's capacity to safely clear a dead short without rupturing or venting. For builders working with large lithium or AGM battery banks capable of delivering very high fault currents, that interrupt rating is a meaningful safety margin, not a theoretical ceiling.\u003c\/p\u003e\n\n\u003ch2\u003eWide Amperage Range Covers Most Off-Grid Builds\u003c\/h2\u003e\n\u003cp\u003eEleven current ratings from 30A to 400A let a builder select the fuse that matches the wire gauge and maximum continuous current of their specific circuit rather than settling for the nearest available size. Correct fuse sizing protects the wire, not just the load: a fuse rated too high for the conductor it protects offers little real protection. The consistent 23.5×20×11.5 mm footprint and M8 bolt pattern are the same across all ratings, so the same mounting location works regardless of which amperage is chosen.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eBolt-on terminal mount:\u003c\/strong\u003e attaches directly to the battery positive terminal copper plate via 5\/16\" \/ M8 hole, with no external fuse holder needed when used with a compatible combiner box\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e58V voltage rating:\u003c\/strong\u003e suitable for 12V, 24V, and 48V battery systems within that ceiling\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh interrupt rating:\u003c\/strong\u003e 10,000A @ 14VDC \/ 5,000A @ 32VDC \/ 2,000A @ 58VDC\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCeramic insulating body:\u003c\/strong\u003e arc-resistant material for safe fault clearing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePES cover material:\u003c\/strong\u003e protective cover over the fuse element\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEleven amperage options:\u003c\/strong\u003e 30A, 40A, 60A, 75A, 100A, 150A, 200A, 250A, 300A, 350A, 400A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCurrent Rating\u003c\/td\u003e\n \u003ctd\u003e30A \/ 40A \/ 60A \/ 75A \/ 100A \/ 150A \/ 200A \/ 250A \/ 300A \/ 350A \/ 400A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Rating\u003c\/td\u003e\n \u003ctd\u003e58V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInterrupt Rating\u003c\/td\u003e\n \u003ctd\u003e10,000A @ 14VDC \/ 5,000A @ 32VDC \/ 2,000A @ 58VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e23.5×20×11.5 mm \/ 0.93×0.79×0.45 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMounting Hole Size\u003c\/td\u003e\n \u003ctd\u003e5\/16\" \/ M8\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulating Body Material\u003c\/td\u003e\n \u003ctd\u003eCeramic\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCover Material\u003c\/td\u003e\n \u003ctd\u003ePES\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded Hardware\u003c\/td\u003e\n \u003ctd\u003eM8 Terminal Bolt ×1\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eRoHS, UL, CE\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy MRBF Terminal Fuse suits builders wiring solar, RV, van conversion, overlanding, marine, and cabin off-grid systems who need compact, direct-terminal overcurrent protection at the battery positive post. The 58V ceiling and 30A–400A range cover most 12V, 24V, and 48V house-battery circuits.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eWhen the MRBF fuse is installed without a compatible combiner box, a separate terminal fuse holder is required. The fuse alone does not provide its own housing in that configuration. The fuse is not rated above 58V, so it is not suitable for higher-voltage systems.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the MRBF fuse need a fuse holder?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWhen the Renogy MRBF Terminal Fuse is used with a compatible combiner box such as the Renogy 500A Combiner Box, no external fuse holder is required: the fuse mounts directly to the terminal. If the fuse is installed without a combiner box, a separate terminal fuse holder is required to house and secure it properly.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat voltage systems is this fuse rated for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy MRBF Terminal Fuse carries a 58V voltage rating, which covers 12V, 24V, and 48V battery systems that operate within that ceiling. It is not rated for systems exceeding 58V.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I choose the right amperage rating?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe correct amperage for an MRBF Terminal Fuse is determined by the wire gauge and maximum continuous current of the circuit being protected, not by the load alone. Selecting a fuse rated too high for the conductor provides little real protection. Eleven ratings from 30A to 400A are available so builders can match the fuse to their specific wire size.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Renogy MRBF Terminal Fuse ships with one MRBF Terminal Fuse and one M8 Terminal Bolt. No additional hardware or fuse holder is included.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the interrupt rating mean for my system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe interrupt rating of the Renogy MRBF Terminal Fuse (10,000A at 14VDC, 5,000A at 32VDC, and 2,000A at 58VDC) is the maximum fault current the fuse can safely clear without rupturing. Large lithium and AGM battery banks can deliver very high short-circuit currents, so a fuse with an adequate interrupt rating is necessary to clear a dead short safely rather than failing destructively.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"30A","offer_id":50656495337542,"sku":"RPD30TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":50656495370310,"sku":"RPD40TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"75A","offer_id":50656495403078,"sku":"RPD75TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"100A","offer_id":50656495435846,"sku":"RPD100TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"200A","offer_id":50656495468614,"sku":"RPD200TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"250A","offer_id":50656495501382,"sku":"RPD250TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"300A","offer_id":50656495534150,"sku":"RPD300TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"350A","offer_id":50656495566918,"sku":"RPD350TF-BL-G1-US","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/fuse-75A-_02__41746.1724858982.1280.1280.jpg?v=1792209218"},{"product_id":"renogy-m-branch-parallel-adapter-cable-pair-for-solar-panels","title":"Renogy M Branch Parallel Adapter Cable Pair for Solar Panels","description":"\u003cp class=\"product-lead\"\u003eThe Renogy M Branch Parallel Adapter Cable pair consists of one MMMF cable and one FFFM cable, together allowing three solar panels to be wired in parallel through a single M-type branch connection. Each connector is rated 30A and 1500V DC (IEC), with tin-plated copper contacts and a polycarbonate housing that meets IP67 protection when mated.\u003c\/p\u003e\n\n\u003ch2\u003eThree Panels, One Branch Connection\u003c\/h2\u003e\n\u003cp\u003eWiring three solar panels in parallel with the M Branch Parallel Adapter Cable pair keeps the system voltage the same as a single panel while combining their current output. That means a larger array can feed a charge controller without requiring a separate combiner box or additional wiring runs, saving both cost and installation complexity on a roof rack, trailer, or ground-mount setup.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Outdoor Conditions\u003c\/h2\u003e\n\u003cp\u003eThe M Branch connectors carry an IP67 protection rating when mated, meaning they are sealed against dust ingress and temporary water immersion. The polycarbonate housing resists UV degradation and high temperatures, and the tin-plated copper contacts resist oxidation over time. The operating temperature range of -40°C to 90°C (-40°F to 194°F) covers the extremes a rooftop or ground-mounted array encounters across seasons.\u003c\/p\u003e\n\n\u003ch2\u003eSecure Lock, Low Contact Resistance\u003c\/h2\u003e\n\u003cp\u003eA built-in locking mechanism holds each mated pair firmly in place without tools, preventing accidental disconnection from vibration or cable tension. Contact resistance of 0.5mΩ keeps resistive losses at the junction minimal, which matters in a high-current parallel branch where even small resistance differences between legs can affect current sharing. Disconnecting the connectors intentionally requires a connector removal spanner.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRated 30A \/ 1500V DC (IEC):\u003c\/strong\u003e suitable for high-voltage solar strings and large parallel arrays\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 mated \/ IP2X unmated:\u003c\/strong\u003e sealed against dust and temporary water immersion when connected\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTin-plated copper contacts:\u003c\/strong\u003e 0.5mΩ contact resistance with anti-oxidation treatment\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFits 14AWG to 10AWG wire:\u003c\/strong\u003e accommodates 2.5mm², 4mm², and 6mm² single-core cable\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in locking mechanism:\u003c\/strong\u003e secure connection without additional hardware\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUV and high-temperature resistant housing:\u003c\/strong\u003e polycarbonate insulation, UL94-V0 flame class\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Voltage\u003c\/td\u003e\n \u003ctd\u003e1500V DC (IEC)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Resistance\u003c\/td\u003e\n \u003ctd\u003e0.5mΩ\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Material\u003c\/td\u003e\n \u003ctd\u003eCopper, tin plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd\u003ePC (polycarbonate)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFlame Class\u003c\/td\u003e\n \u003ctd\u003eUL94-HB \/ UL94-V0\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Degree\u003c\/td\u003e\n \u003ctd\u003eIP67 mated \/ IP2X unmated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSafety Degree\u003c\/td\u003e\n \u003ctd\u003eII\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°C to 90°C \/ -40°F to 194°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible Cable Section\u003c\/td\u003e\n \u003ctd\u003e2.5mm², 4mm², 6mm² single core (14AWG to 10AWG)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertification\u003c\/td\u003e\n \u003ctd\u003eCE\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e1 year\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Contents\u003c\/td\u003e\n \u003ctd\u003e1 pair (1x MMMF cable + 1x FFFM cable)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.35 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe M Branch Parallel Adapter Cable pair suits builders wiring exactly three solar panels in parallel on an overlanding rig, trailer, van roof, or cabin array, using 14AWG to 10AWG (2.5mm² to 6mm²) single-core solar cable and standard M-type connectors.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis pair is not designed to connect fewer than three panels or to branch more than three panels in a single adapter. It is not rated for AC wiring. Wire sizes outside the 2.5mm² to 6mm² range are not compatible with this connector.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does this M Branch Parallel Adapter Cable pair actually do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe M Branch Parallel Adapter Cable pair connects three solar panels in parallel through a single branch junction. One MMMF cable and one FFFM cable work together so the combined current from all three panels flows to a single output connection, keeping system voltage equal to one panel's output voltage.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauges are compatible with these M Branch connectors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe M Branch connectors accept 14AWG to 10AWG solar wire, corresponding to single-core cable cross-sections of 2.5mm², 4mm², and 6mm². Wire outside this range is not compatible with the connector's cable entry.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhy do the M Branch connectors feel so tight once mated, and how are they removed?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe M Branch connectors use a built-in locking mechanism that holds the mated pair firmly sealed. The tight fit is intentional: it contributes to the IP67 protection rating. Disconnecting them requires a connector removal spanner; they are not designed to pull apart by hand.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the IP67 rating mean for these connectors in outdoor use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIP67 mated means the M Branch connectors are fully sealed against dust and can withstand temporary water immersion when connected. When unmated, the rating drops to IP2X, meaning the open contacts have limited protection, so connectors should be mated or capped when not in use in wet conditions.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656510181446,"sku":"RPC0110EC-M-G1-US","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/02__72683.1722929056.1280.1280.jpg?v=1792209314"},{"product_id":"renogy-rover-lite-60a-mppt-solar-charge-controller-12v-48v","title":"Renogy Rover Lite 60A MPPT Solar Charge Controller 12V–48V","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Rover Lite is a 60A MPPT solar charge controller compatible with 12V, 24V, 36V, and 48V battery systems, accepting up to 150V DC open-circuit solar input and delivering greater than 99% MPPT tracking efficiency and greater than 97% conversion efficiency. It supports AGM, Gel, Flooded, Lithium Iron Phosphate, and user-custom battery presets, making it a single controller for a wide range of off-grid builds: overlanding rigs, RVs, marine installations, and cabin systems. Two variants are available: Controller Only and a bundle that includes the BT-2 Bluetooth module for wireless monitoring.\u003c\/p\u003e\n\n\u003ch2\u003eInternal Potting for Reliable Heat Management\u003c\/h2\u003e\n\u003cp\u003eThe Rover Lite uses internal potting to transfer heat from its electronics to external metal heat sinks rather than relying on airflow alone. In a truck camper shell, a van build, or a trailer compartment where ventilation is limited, a controller that runs hot throttles output or fails prematurely. The potted design keeps operating temperatures in check across the controller's rated range, so charging performance stays consistent even during sustained high-current sessions on warm days.\u003c\/p\u003e\n\n\u003ch2\u003eLow Self-Consumption Keeps More Power in Your Batteries\u003c\/h2\u003e\n\u003cp\u003eThe Rover Lite draws just 0.18W from a 12V battery bank when the system is idle. In off-grid builds where the controller runs continuously, every watt the controller consumes for itself is a watt unavailable to run lights, a refrigerator, or a CPAP overnight. Lower standby draw is especially relevant for weekend overlanders who leave a rig parked mid-week and need the battery bank to hold charge between trips.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Temperature Protection for Lithium Batteries\u003c\/h2\u003e\n\u003cp\u003eThe Rover Lite includes low-temperature protection that suspends charging below 32°F, preventing damage to lithium iron phosphate cells during cold-weather operation. For overlanders and campers who run LiFePO4 batteries in climates where overnight temperatures drop below freezing, this protection removes the need for a separate low-temp cutoff device. The controller also applies temperature compensation for non-lithium chemistries using a -3 mV\/°C\/2V coefficient via the included battery temperature sensor.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e150V DC max solar input:\u003c\/strong\u003e accepts series, parallel, or series-parallel panel configurations up to 150V open-circuit voltage\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAuto system voltage recognition:\u003c\/strong\u003e detects 12V, 24V, 36V, or 48V battery banks automatically (non-lithium); lithium requires manual selection\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMultiple battery presets:\u003c\/strong\u003e AGM, Gel, Flooded, Lithium Iron Phosphate, and User Custom charging profiles\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRS485 communication port:\u003c\/strong\u003e enables integration with compatible monitoring systems\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e20A load output terminal:\u003c\/strong\u003e supports direct connection of 12V DC loads up to 20A\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLCD display with built-in buttons:\u003c\/strong\u003e shows real-time charging data without requiring an app or external device\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Charge Current\u003c\/td\u003e\n \u003ctd\u003e60A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Voltage (Non-Lithium)\u003c\/td\u003e\n \u003ctd\u003e12 \/ 24 \/ 36 \/ 48 VDC (Auto Recognition)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Input Voltage Range\u003c\/td\u003e\n \u003ctd\u003e9–64 VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e150 VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Solar Input Power\u003c\/td\u003e\n \u003ctd\u003e900W (12V) \/ 1800W (24V) \/ 2000W (36V) \/ 3200W (48V)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMPPT Tracking Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;99%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConversion Efficiency\u003c\/td\u003e\n \u003ctd\u003e\u0026gt;97%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSelf-Consumption\u003c\/td\u003e\n \u003ctd\u003e0.18W (12V system)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Consumption\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;15 mA (12V) \/ \u0026lt;11 mA (24V) \/ \u0026lt;8 mA (36V) \/ \u0026lt;7 mA (48V)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eLoad Output\u003c\/td\u003e\n \u003ctd\u003e20A max, 12V DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Presets\u003c\/td\u003e\n \u003ctd\u003eAGM, Gel, Flooded, Lithium Iron Phosphate, User Custom\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharger Algorithm (Lead Acid)\u003c\/td\u003e\n \u003ctd\u003e3-stage: Bulk, Boost, Float, Equalize\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCharger Algorithm (Lithium)\u003c\/td\u003e\n \u003ctd\u003e2-stage: Bulk, Boost\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Compensation\u003c\/td\u003e\n \u003ctd\u003e-3 mV\/°C\/2V (Non-Lithium); 0 mV\/°C\/2V (Lithium)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCommunication\u003c\/td\u003e\n \u003ctd\u003eRS485\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eGrounding\u003c\/td\u003e\n \u003ctd\u003eCommon Negative\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-31°F to 113°F \/ -35°C to 65°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to 176°F \/ -40°C to 80°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHumidity\u003c\/td\u003e\n \u003ctd\u003e0%–95% RH\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n \u003ctd\u003eIP32\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCooling\u003c\/td\u003e\n \u003ctd\u003eHeat Sink\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e305 x 205 x 99 mm \/ 12.01 x 8.07 x 3.90 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e3.5 kg \/ 7.71 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eFCC Part 15 Class B, CE, RoHS\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded\u003c\/td\u003e\n \u003ctd\u003eCharge controller, battery temperature sensor, mounting screws (x4), user manual\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBluetooth Module (W\/ BT Variant)\u003c\/td\u003e\n \u003ctd\u003eBT-2 module included; stores up to 2 years of system data\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Rover Lite 60A is suited for off-grid builds where the battery bank is 12V, 24V, 36V, or 48V and the solar array stays within 150V open-circuit voltage: overlanding trucks and trailers, RVs, marine vessels, and cabin or workshop installations running AGM, Gel, Flooded, or LiFePO4 batteries. The W\/ Bluetooth Module variant adds wireless monitoring and two-year data logging for builders who want remote visibility into system performance.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Rover Lite is rated IP32 and is not suitable for direct exposure to rain, spray, or dusty environments without additional enclosure protection. The load output terminal supports 12V DC loads only, up to 20A. AC loads require a separate inverter connected directly to the battery bank, not to the load terminals. The Rover Lite 60A does not support auto-recognition for 36V or 48V lithium battery systems; system voltage must be set manually for lithium chemistries.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat solar panel configurations does the Rover Lite 60A support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rover Lite 60A MPPT solar charge controller accepts series, parallel, or series-parallel panel wiring, as long as the combined open-circuit voltage does not exceed 150V DC and the array power stays within the rated maximum for the battery voltage in use: 900W at 12V, 1800W at 24V, 2000W at 36V, or 3200W at 48V.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich battery chemistries are compatible?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rover Lite 60A charge controller includes presets for AGM, Gel, Flooded lead-acid, and Lithium Iron Phosphate batteries, plus a User Custom profile for non-standard charging parameters. Temperature compensation is applied automatically for non-lithium chemistries using the included battery temperature sensor; lithium presets use no temperature compensation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan I connect DC appliances directly to the controller?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rover Lite 60A includes a load output terminal rated for 12V DC loads up to 20A. AC appliances require a separate inverter wired directly to the battery bank. The load terminal is not intended for inverter connection, and the battery bank must always remain connected to the controller when the load terminal is in use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Bluetooth variant require a separate app or device?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe W\/ Bluetooth Module variant includes the BT-2 module, which enables wireless monitoring and stores up to two years of system data. The Controller Only variant has an onboard LCD display and built-in buttons for real-time monitoring without Bluetooth; the BT-2 module can be added separately if needed later.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the operating temperature range?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Rover Lite 60A MPPT solar charge controller is rated for operation from -31°F to 113°F (-35°C to 65°C) and includes low-temperature protection that suspends charging below 32°F to protect lithium batteries from cold-weather damage. Storage is rated from -40°F to 176°F (-40°C to 80°C).\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Controller Only","offer_id":50656536985670,"sku":"RCC60RVRE-G1-US","price":249.99,"currency_code":"USD","in_stock":true},{"title":"W\/ Bluetooth Module","offer_id":50656537018438,"sku":"RCC60RVRE-BT-US","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RCC60RVRE-1.jpg?v=1792209338"},{"product_id":"renogy-40a-dc-dc-battery-charger-with-mppt","title":"Renogy 40A DC-DC Battery Charger with MPPT","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 40A DC-DC Battery Charger with MPPT is a 12V-to-12V onboard charging unit that draws from a vehicle alternator while driving and from a solar array when parked, delivering up to 40A of output current at 616W and 93% charging efficiency. It supports AGM, Gel, Flooded, and Lithium-iron Phosphate battery banks and is sized for overlanding rigs, campervans, boats, and off-grid trailers running a single 12V house battery system.\u003c\/p\u003e\n\n\u003ch2\u003eIntelligent Input Switching\u003c\/h2\u003e\n\u003cp\u003eThe Renogy 40A DC-DC Charger defaults to DC (alternator) priority and automatically transitions to solar input when alternator voltage drops below the defined threshold: 11.3V while the engine is running, or 12.7V with the engine off, provided solar input exceeds 13V. This automatic handoff means the house battery continues charging through a rest stop or overnight camp without any manual intervention. Solar priority mode is also selectable by pressing the SELECT button, useful when a large panel array can outpace alternator output during daylight hours.\u003c\/p\u003e\n\n\u003ch2\u003eSmart Alternator Compatibility\u003c\/h2\u003e\n\u003cp\u003eModern vehicles equipped with Euro 6 smart alternators vary their output voltage based on engine load and regenerative braking, which can confuse a direct battery-to-battery connection. The Renogy 40A DC-DC Charger handles both traditional alternators (13.2–16.0V DC input) and smart alternators (12–16.0V DC input) by reading the ignition signal through the included IGN\/ACC wire. Connecting that wire to the vehicle ignition port tells the charger when the engine is actually running, preventing it from drawing down the starter battery when the vehicle is parked.\u003c\/p\u003e\n\n\u003ch2\u003eBattery Type Flexibility and LED Configuration\u003c\/h2\u003e\n\u003cp\u003eBecause the charger carries no display screen, battery type is set by pressing and holding the SELECT button: LED indicators cycle through AGM, Gel, Flooded, and Lithium-iron Phosphate profiles in sequence. Each profile applies the correct absorption and float voltages for that chemistry, allowing the battery bank to reach a full 100% state of charge. The charger also includes a low-voltage recovery function for lithium batteries that have discharged below normal operating range.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual-input switching:\u003c\/strong\u003e alternator (DC) and solar inputs with automatic or user-selected priority\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e40A maximum output \/ 616W output power\u003c\/strong\u003e at 93% charging efficiency\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSmart alternator support\u003c\/strong\u003e via IGN\/ACC ignition-signal wire for Euro 6 vehicles\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFour battery chemistry profiles (AGM, Gel, Flooded, Lithium-iron Phosphate),\u003c\/strong\u003e selected by LED-guided SELECT button\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP31 enclosure rating\u003c\/strong\u003e with heat-sink passive cooling\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInput fuse 60A \/ output fuse 50A\u003c\/strong\u003e with idle draw under 10 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eRBC40D1S\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSystem Voltage\u003c\/td\u003e\n\u003ctd\u003e12V–12V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaximum Output Current\u003c\/td\u003e\n\u003ctd\u003e40A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Power\u003c\/td\u003e\n\u003ctd\u003e616W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharging Efficiency\u003c\/td\u003e\n\u003ctd\u003e93%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSolar Input Voltage\u003c\/td\u003e\n\u003ctd\u003e10–30V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDC Output Voltage\u003c\/td\u003e\n\u003ctd\u003e10–16V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAlternator Input, Traditional\u003c\/td\u003e\n\u003ctd\u003e13.2–16.0V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAlternator Input, Smart (Euro 6)\u003c\/td\u003e\n\u003ctd\u003e12–16.0V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSupported Battery Types\u003c\/td\u003e\n\u003ctd\u003eAGM, Gel, Flooded, Lithium-iron Phosphate\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInput Fuse Rating\u003c\/td\u003e\n\u003ctd\u003e60A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Fuse Rating\u003c\/td\u003e\n\u003ctd\u003e50A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eGrounding\u003c\/td\u003e\n\u003ctd\u003eCommon Negative\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP31\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eHeat Sink\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-4°F to 113°F \/ -20°C to 45°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-4°F to 140°F \/ -20°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e0%–90% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e195 × 149 × 48 mm \/ 7.68 × 5.87 × 1.89 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.2 kg \/ 2.65 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eFCC Part 15 Class B, CE, RoHS, SAA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-year material and workmanship\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eBattery Charger ×1, Heat-shrink tubing ×7, Mounting Screws ×4\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 40A DC-DC Battery Charger with MPPT suits overlanders, van-lifers, and boaters running a 12V house battery bank (AGM, Gel, Flooded, or LiFePO4) who want a single unit that charges from both the vehicle alternator while driving and a rooftop or hood-mounted solar array while parked. It is compatible with both traditional and Euro 6 smart alternators when the IGN\/ACC wire is connected to the ignition port.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis charger is a 12V-to-12V unit only and does not support 24V or 48V house battery systems. The IP31 enclosure rating means it is not designed for direct exposure to rain or spray and must be mounted in a protected location. Solar panels, battery cables, ANL fuses, and mounting hardware beyond the four included screws are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this charger work with a smart alternator?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A DC-DC Battery Charger supports both traditional alternators (13.2–16.0V DC input) and Euro 6 smart alternators (12–16.0V DC input). For smart alternator installations, the IGN\/ACC wire included with the charger must be connected to the vehicle ignition port so the unit can detect when the engine is running and avoid drawing down the starter battery.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich battery chemistries does the 40A DC-DC Charger support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A DC-DC Battery Charger supports AGM, Gel, Flooded, and Lithium-iron Phosphate (LiFePO4) battery banks. Battery type is selected by pressing and holding the SELECT button on the side of the unit; LED indicators cycle through the available profiles. Each profile applies the correct charge voltages for that chemistry and allows the bank to reach a full 100% state of charge.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow does the charger switch between solar and alternator inputs?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A DC-DC Battery Charger defaults to DC (alternator) priority. It automatically switches to solar input when the alternator voltage drops below 11.3V with the engine running, or below 12.7V with the engine off, provided solar input voltage exceeds 13V. Pressing the SELECT button once sets solar priority mode instead, which can be useful when solar input is the stronger source during daylight hours.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the enclosure rating, and where should the charger be mounted?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A DC-DC Battery Charger carries an IP31 enclosure rating, which provides protection against vertically falling water droplets but is not rated for rain exposure or spray. Mounting in a protected interior location (inside a vehicle, trailer, or enclosure) with adequate airflow around the heat-sink fins for passive cooling is required.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box with the charger?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A DC-DC Battery Charger ships with the charger unit, seven heat-shrink tubing pieces, and four mounting screws. Solar panels, battery interconnect cables, ANL fuse holders, and additional wiring are not included and must be sourced separately to complete the installation.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656652263494,"sku":"RBC40D1S-G1-US","price":205.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RBC40D1S-_01__81701.1751961750.1280.1280.jpg?v=1792209357"},{"product_id":"renogy-solar-double-cable-entry-gland","title":"Renogy Solar Double Cable Entry Gland","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Double Cable Entry Gland is a waterproof, UV-resistant cable routing accessory designed to seal solar panel wiring through rooftop surfaces on RVs, boats, cabins, farms, and other mobile or stationary installations. Made from 100% recyclable ABS plastic, it accommodates cables from 10AWG to 6AWG and installs without drilling using self-tapping screws and adhesive.\u003c\/p\u003e\n\n\u003ch2\u003eWeatherproof Where It Counts\u003c\/h2\u003e\n\u003cp\u003eSolar cable penetrations are one of the most common entry points for water damage on a rooftop installation. The Renogy Solar Double Cable Entry Gland seals around the cable with included MC-4 waterproof heads and O-ring-sealed self-tapping screws, blocking wind-driven rain and preventing the cable flex and vibration that can wear through less protected entries over time. A sealed penetration also keeps the cable path tidy and reduces the risk of chafing against a roof edge.\u003c\/p\u003e\n\n\u003ch2\u003eNo-Drill Installation\u003c\/h2\u003e\n\u003cp\u003eThe gland mounts with self-tapping screws and adhesive (Sikaflex 252 or a comparable sealant), so no core drilling is required. That matters on surfaces where drilling risks delamination or voiding a roof warranty. The installation surface must be flat and structurally sound, and the gland's sealing integrity should be verified before final mounting.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Last Outdoors\u003c\/h2\u003e\n\u003cp\u003eThe ABS plastic housing is formulated for UV and water resistance, which matters for a component that sits exposed on a rooftop year-round. The material is also 100% recyclable. The gland is compatible with all aluminum-framed solar panels, making it a straightforward addition to most residential-style panel installations regardless of brand.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eNo-drill mounting:\u003c\/strong\u003e installs with self-tapping screws and adhesive, no core drilling needed\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUV- and water-resistant housing:\u003c\/strong\u003e 100% recyclable ABS plastic rated for outdoor rooftop exposure\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual cable entry:\u003c\/strong\u003e two cable glands accommodate cables from 10AWG to 6AWG\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWind and rain resistance:\u003c\/strong\u003e seals against weather and dampens cable vibration and bending\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBroad panel compatibility:\u003c\/strong\u003e works with all aluminum-framed solar panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaterial\u003c\/td\u003e\n \u003ctd\u003eUV-resistant ABS Plastic (100% recyclable)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n \u003ctd\u003e7.15 x 3.72 x 1.57 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCable Gland Diameter Range\u003c\/td\u003e\n \u003ctd\u003e10AWG–6AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMatching Screw Size\u003c\/td\u003e\n \u003ctd\u003eSelf-tapping screws 5.5 x 38mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRecommended Adhesive\u003c\/td\u003e\n \u003ctd\u003eSikaflex 252 or equivalent\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePanel Compatibility\u003c\/td\u003e\n \u003ctd\u003eAll aluminum-framed solar panels\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWhat's Included\u003c\/td\u003e\n \u003ctd\u003eSolar Double Cable Entry Gland x1, Cable Gland x2, MC-4 Waterproof Head x2, Self-tapping Screw with O-Ring Seal x4\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Double Cable Entry Gland suits anyone routing solar panel cables through a rooftop on an RV, boat, cabin, farm structure, or mobile rig, particularly where a clean, weatherproof penetration is needed without drilling a large core hole. It works with any aluminum-framed solar panel and accepts cables from 10AWG to 6AWG.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe gland requires a flat, structurally secure mounting surface; it is not suitable for curved or soft surfaces that cannot support a stable seal. Compatibility with non-aluminum-framed panels is not stated. Adhesive (Sikaflex 252 or equivalent) is not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat cable sizes does the Renogy Solar Double Cable Entry Gland accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Double Cable Entry Gland accommodates cables in the 10AWG to 6AWG range through its two cable glands. This covers the wire gauges commonly used for solar panel output leads in residential-scale off-grid and mobile systems.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes installation really require no drilling?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Double Cable Entry Gland mounts using self-tapping screws and adhesive; no core drilling is required. The mounting surface must be flat and structurally sound. Sikaflex 252 or a comparable sealant is recommended as the adhesive but is not included in the package.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe package includes one Solar Double Cable Entry Gland body, two cable glands, two MC-4 waterproof heads, and four self-tapping screws with O-ring seals. Adhesive is not included.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the Renogy Solar Double Cable Entry Gland compatible with any solar panel brand?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Double Cable Entry Gland is compatible with all aluminum-framed solar panels regardless of brand. Compatibility with panels that use a non-aluminum frame is not stated.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat precautions should I take before installing the cable entry gland?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBefore installing the Renogy Solar Double Cable Entry Gland, verify that the gland's sealing components are intact and that the mounting surface is flat and structurally secure. An uneven or soft surface can compromise the weatherproof seal.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656998064198,"sku":"RMT01CE-G1-US","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__93614.1724858987.1280.1280.jpg?v=1792209441"},{"product_id":"renogy-40a-thermal-circuit-breaker","title":"Renogy 40A Thermal Circuit Breaker","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 40A Thermal Circuit Breaker is a resettable overcurrent protection device for 12V and 24V off-grid electrical systems in overlanding rigs, vans, trailers, and cabins. Rated for 40 amps, it shuts off power automatically during an overload or short circuit and resets with a single button press, with no fuse replacement required. The IP67-rated, 94V0 thermal plastic housing holds up in harsh environments, and the M6 terminal posts accept standard ring-terminal lugs.\u003c\/p\u003e\n\n\u003ch2\u003eResettable Protection Without Fuse Changes\u003c\/h2\u003e\n\u003cp\u003eA blown fuse in a remote location means a trip to find a replacement, or a system that stays offline until one is found. The Renogy 40A Thermal Circuit Breaker eliminates that problem: when the breaker trips on an overload or short circuit, power shuts off immediately to protect downstream devices, and a button press resets the breaker once the fault is cleared. For an overlanding rig or van build where access to spare fuses is not guaranteed, a resettable breaker at the 40A rating point means the system can be restored in seconds rather than minutes of searching.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Outdoor and Marine Environments\u003c\/h2\u003e\n\u003cp\u003eThe Renogy 40A Thermal Circuit Breaker carries an IP67 protection rating, meaning it is sealed against dust ingress and temporary water immersion. That is a meaningful spec for a component mounted in a truck bed, trailer bay, or engine-adjacent compartment where moisture and debris are routine. The housing is UL-rated 94V0 thermal plastic, a flame-retardant grade that limits fire spread if the component is ever exposed to extreme heat. The breaker meets SAE J553, J1625, J142830A, J1171, and UL1500 (Ignition Protected) standards, the last of which is specifically required for components installed near fuel systems in marine and vehicle applications.\u003c\/p\u003e\n\n\u003ch2\u003eWide Operating Temperature Range\u003c\/h2\u003e\n\u003cp\u003eThe Renogy 40A Thermal Circuit Breaker operates reliably from -32°C to 82°C (-25°F to 180°F). That range covers cold-weather camping where overnight temperatures drop well below freezing and engine-compartment or enclosed trailer installations where ambient heat builds during summer driving. A breaker that drifts or nuisance-trips outside a narrow temperature band creates intermittent faults that are difficult to diagnose; the stated range reduces that risk across the conditions overlanders and van builders typically encounter.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eResettable design:\u003c\/strong\u003e trips on overload or short circuit and resets with a button press, with no fuse replacement needed\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 protection rating:\u003c\/strong\u003e sealed against dust and temporary water immersion\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e94V0 thermal plastic housing:\u003c\/strong\u003e UL-rated flame-retardant material\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eM6 terminal posts:\u003c\/strong\u003e accept standard ring-terminal lugs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIgnition Protected (UL1500):\u003c\/strong\u003e meets SAE J553, J1625, J142830A, J1171, and UL1500 standards\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e rated -32°C to 82°C (-25°F to 180°F)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e40A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHousing Material\u003c\/td\u003e\n \u003ctd\u003eUL-rated 94V0 thermal plastic\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Post Size\u003c\/td\u003e\n \u003ctd\u003eM6\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-32°C to 82°C (-25°F to 180°F)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStandards\u003c\/td\u003e\n \u003ctd\u003eSAE J553, J1625, J142830A, J1171, UL1500 (Ignition Protected)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n \u003ctd\u003e5.59 x 2.87 x 2.13 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Weight\u003c\/td\u003e\n \u003ctd\u003e0.27 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRPD40CB-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 40A Thermal Circuit Breaker suits builders of overlanding rigs, van conversions, trailers, and off-grid cabins who need resettable overcurrent protection at the 40A rating point and want a component that meets marine and vehicle ignition-protection standards. The IP67 rating and wide operating temperature range make it appropriate for exposed or semi-exposed mounting locations.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis breaker is rated at 40A; circuits requiring 30A, 60A, or 80A protection need the corresponding Renogy variant. Voltage rating is not stated in available product data, so system voltage compatibility should be confirmed before installation. Cables, fuse boxes, and battery switches are not included.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this circuit breaker require fuse replacement after it trips?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A Thermal Circuit Breaker does not use a replaceable fuse. When the breaker trips on an overload or short circuit, it shuts off power to protect the circuit. Once the fault is resolved, pressing the reset button restores operation with no replacement parts needed.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat terminal lug size fits the posts on this breaker?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A Thermal Circuit Breaker uses M6 terminal posts. Standard ring-terminal lugs sized for M6 hardware are compatible. Confirm lug sizing against the wire gauge used in the circuit before installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this breaker rated for marine or vehicle fuel-system-adjacent installations?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A Thermal Circuit Breaker meets UL1500 (Ignition Protected) and SAE J553, J1625, J142830A, and J1171 standards. The UL1500 Ignition Protected rating is specifically required for components installed near fuel systems in marine and vehicle applications.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the operating temperature range of this breaker?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 40A Thermal Circuit Breaker is rated to operate from -32°C to 82°C (-25°F to 180°F), covering cold-weather and high-heat installation environments including engine compartments, trailer bays, and outdoor enclosures.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the IP67 rating mean for this circuit breaker?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe IP67 rating on the Renogy 40A Thermal Circuit Breaker means the housing is fully sealed against dust ingress and protected against temporary water immersion. This makes it suitable for mounting in truck beds, trailer compartments, and other locations exposed to moisture and debris.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656998195270,"sku":"RPD40CB-G1-US","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__13027.1724858978.1280.1280.jpg?v=1792209458"},{"product_id":"renogy-12v-20ah-lifepo4-trolling-motor-battery","title":"Renogy 12V 20Ah LiFePO4 Trolling Motor Battery","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 12V 20Ah LiFePO4 Trolling Motor Battery is a compact deep-cycle lithium iron phosphate battery designed for trolling motors, fish finders, portable ham radios, and electric scooters. At 5.95 lbs, it weighs approximately 50% less than a comparable lead-acid battery and delivers 30% more usable capacity per charge. A built-in BMS and IP65 rating make it suitable for on-water and outdoor use across a range of 12V applications.\u003c\/p\u003e\n\n\u003ch2\u003eHalf the Weight, More Time on the Water\u003c\/h2\u003e\n\u003cp\u003eAt 5.95 lbs, the Renogy 12V 20Ah LiFePO4 battery weighs approximately 50% less than a lead-acid battery of the same capacity. For a kayak angler or small-boat fisherman managing gear weight carefully, that reduction matters: lighter battery weight means more room for tackle, a more balanced hull, and less fatigue hauling gear to and from the water. The compact 7.13 x 3.03 x 6.61 in footprint fits tight battery compartments where a bulkier lead-acid unit would not.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt-In Protection for Harsh Conditions\u003c\/h2\u003e\n\u003cp\u003eA built-in battery management system provides more than 20 layers of protection, including overcharge, over-discharge, over-current, and short-circuit safeguards, with automatic disconnection at low and high temperatures. The IP65 rating protects the enclosure against water jets and dust ingress, so splashes, rain, and dusty trail conditions will not compromise the battery. The low-temperature cut-off prevents charging below 32°F (0°C), protecting cell integrity in cold-weather use.\u003c\/p\u003e\n\n\u003ch2\u003eLong Cycle Life and Expandable Capacity\u003c\/h2\u003e\n\u003cp\u003eRated for 4,000 cycles at 80% depth of discharge (0.5C, 25°C), the Renogy 12V 20Ah LiFePO4 battery lasts up to eight times longer than a comparable lead-acid battery. For a ham radio operator running Parks on the Air activations or a kayak angler making weekly trips, that longevity means years of reliable service without replacement. Up to 16 batteries of the same model and similar capacity can be connected in series and parallel to expand the system to a maximum of 4.096kWh, giving the battery room to grow with a larger rig or van build.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompact form factor:\u003c\/strong\u003e 7.13 x 3.03 x 6.61 in \/ 181 x 77 x 168 mm, fits tight battery compartments\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLightweight build:\u003c\/strong\u003e 5.95 lbs \/ 2.7 kg, approximately 50% lighter than a comparable lead-acid battery\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in BMS:\u003c\/strong\u003e 20+ protection layers including overcharge, over-discharge, over-current, short-circuit, and low\/high temperature auto-disconnect\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65 rated:\u003c\/strong\u003e protected against water jets and dust for outdoor and on-water use\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh cycle life:\u003c\/strong\u003e 4,000 cycles at 80% DOD (0.5C, 25°C)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eExpandable:\u003c\/strong\u003e connect up to 16 batteries of the same model in series and parallel for up to 4.096kWh total capacity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Capacity\u003c\/td\u003e\n\u003ctd\u003e20Ah (0.5C, 25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12.8V nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnergy\u003c\/td\u003e\n\u003ctd\u003e256Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e4,000 cycles (0.5C, 25°C, 80% DOD)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharging Voltage Range\u003c\/td\u003e\n\u003ctd\u003e10V to 14.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge Current\u003c\/td\u003e\n\u003ctd\u003e20A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Discharge Current\u003c\/td\u003e\n\u003ctd\u003e20A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n\u003ctd\u003e75A @ 5s\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Temperature Range\u003c\/td\u003e\n\u003ctd\u003e32°F to 131°F (0°C to 55°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDischarge Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-4°F to 140°F (-20°C to 60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-4°F to 140°F (-20°C to 60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Relative Humidity\u003c\/td\u003e\n\u003ctd\u003e10% to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e7.13 x 3.03 x 6.61 in \/ 181 x 77 x 168 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e5.95 lbs \/ 2.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminal Bolt Size\u003c\/td\u003e\n\u003ctd\u003eM6 x 1.25 x 10 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP65\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eMSDS, UN38.3, FCC, CE, PSE, RCM, IC, RoHS, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003e12.8V 20Ah LiFePO4 battery x1, terminal bolt M6 x 1.25 x 10 mm x2, user manual x1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 12V 20Ah LiFePO4 battery suits anglers, kayakers, and boaters running 12V trolling motors, fish finders, or depth sounders who want to reduce battery weight and extend time on the water. It also works well for portable ham radio operators, electric scooter users, and overlanders or van builders needing a compact 12V deep-cycle battery with a long service life. Before installation, confirm your charger is compatible with lithium iron phosphate chemistry and that the battery compartment allows 1.97–3.94 in (50–100 mm) of clearance above the battery and at least 7.87 in (200 mm) on the busbar side.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis battery does not include a Bluetooth port and cannot be paired with a Renogy Bluetooth Module for wireless monitoring; a Renogy 300A Battery Shunt (sold separately) is required for app-based monitoring. The battery does not include a self-heating function and will not accept a charge below 32°F (0°C), as the BMS disconnects charging at low temperatures to protect the cells. Verify charger and device compatibility before replacing an existing lead-acid battery, as not all systems are drop-in compatible without adjustment.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this battery replace an existing lead-acid battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIn most cases the Renogy 12V 20Ah LiFePO4 battery can replace a lead-acid battery of the same voltage and capacity, but compatibility with the existing charger and device must be verified before making the switch. Not all lead-acid chargers are suitable for lithium iron phosphate chemistry, and some systems may require a dedicated LiFePO4 charger.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat BMS protections does this battery include?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 20Ah LiFePO4 battery includes a built-in battery management system with more than 20 protection features, covering overcharge, over-discharge, over-current, and short-circuit conditions. The BMS also supports automatic disconnection at low and high temperatures to protect the cells during extreme-weather use.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many of these batteries can be connected together?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eUp to 16 Renogy 12V 20Ah LiFePO4 batteries of the same model and similar capacity can be connected in series and parallel combinations, expanding total system capacity to a maximum of 4.096kWh. Mixing batteries of different models or significantly different capacities is not recommended.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this battery be monitored wirelessly through the Renogy app?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis battery does not have a Bluetooth port and cannot be paired with a Renogy Bluetooth Module directly. Wireless monitoring through the Renogy app is possible by connecting the battery to a Renogy 300A Battery Shunt, which is sold separately and transmits battery status data via Bluetooth to the app.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow long does it take to fully charge this battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eCharging time depends on the charger's output current. Using a dedicated 10A lithium battery charger, the Renogy 12V 20Ah LiFePO4 battery takes approximately 2 hours to reach a full charge. A dedicated charger compatible with lithium iron phosphate chemistry is recommended rather than a standard lead-acid charger.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656998326342,"sku":"RBT1220LFP-TM-G1-US","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1600-1600_icon_bac2c79a-2eab-4870-83ea-23c626fafe9d.jpg?v=1792209570"},{"product_id":"renogy-class-t-fuse-with-set-150a-250a-350a","title":"Renogy Class T Fuse with Set 150A \/ 250A \/ 350A","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Class T Fuse with Set is a high-current overcurrent protection assembly available in 150A, 250A, and 350A ratings, designed to protect the connection between a battery and inverter or other high-draw loads in RV, marine, truck, and overlanding electrical systems. The V0-rated fireproof ABS polymer housing and arc-extinguishing fuse element are rated to 250V AC\/DC with a 10kA maximum interrupt current. All three amperage variants share the same housing and screw-terminal design.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Stop Overcurrent Before It Causes Damage\u003c\/h2\u003e\n\u003cp\u003eA Class T fuse sits at one of the most critical points in a 12V or 24V system: the short, high-current run between the battery bank and the inverter or main distribution point. When a fault occurs, the fuse must interrupt current fast enough to prevent damage to wiring, batteries, and connected equipment. The Renogy Class T Fuse with Set uses an arc-extinguishing fuse element rated to interrupt up to 10kA, which means it can safely break even a hard short-circuit current without the arc continuing to conduct after the element opens.\u003c\/p\u003e\n\n\u003ch2\u003eV0 Fireproof Housing for High-Stakes Installations\u003c\/h2\u003e\n\u003cp\u003eThe housing is molded from V0-rated ABS polymer, the highest standard flammability classification for self-extinguishing plastics. In an enclosed vehicle or cabin installation where a fuse failure could otherwise ignite surrounding materials, V0 housing provides a meaningful layer of passive protection. The housing is also sized to accommodate larger cable packs and the M8 (5\/16\") stud hardware needed for high-current terminations.\u003c\/p\u003e\n\n\u003ch2\u003eReplaceable Fuse Element Reduces Long-Term Cost\u003c\/h2\u003e\n\u003cp\u003eThe fuse element inside the Renogy Class T Fuse with Set is field-replaceable. Loosening two bolts allows the fuse to be removed from the housing without replacing the entire assembly. For overlanding and off-grid installations where a blown fuse in a remote location would otherwise mean replacing a more expensive holder, keeping a spare fuse element on hand is a practical contingency.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e250V AC\/DC voltage rating:\u003c\/strong\u003e suitable for 12V, 24V, and 48V DC systems as well as AC applications within the rated voltage\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10kA maximum interrupt current:\u003c\/strong\u003e arc-extinguishing element safely breaks high fault currents\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eV0 fireproof ABS polymer housing:\u003c\/strong\u003e self-extinguishing material rated to the highest standard flammability classification\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eM8 (5\/16\") stud terminals:\u003c\/strong\u003e screw-type connection accommodates large-gauge cable lugs for high-current runs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eReplaceable fuse element:\u003c\/strong\u003e two-bolt removal allows field replacement without discarding the housing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThree amperage options:\u003c\/strong\u003e 150A, 250A, and 350A variants to match system load requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e150A\u003c\/th\u003e\n \u003cth\u003e250A\u003c\/th\u003e\n \u003cth\u003e350A\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Rating\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e250V AC\/DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Interrupt Current\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e10kA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStud \/ Post Size\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eM8 (5\/16\")\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHousing Material\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eV0 Fireproof ABS Polymer\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConnector Type\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eScrew terminal\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Dimensions\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e4.96 × 1.46 × 1.77 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Weight\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e0.42 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRPD150CTF-SET-G1-US\u003c\/td\u003e\n \u003ctd\u003eRPD250CTF-SET-G1-US\u003c\/td\u003e\n \u003ctd\u003eRPD350CTF-SET-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Class T Fuse with Set suits builders of 12V, 24V, and 48V DC electrical systems in RVs, overlanding rigs, boats, trucks, and off-grid cabins who need a rated, replaceable overcurrent protection device at the battery-to-inverter or main-distribution connection. The 150A variant is sized for 12V systems running up to 1000W inverters; the 250A for up to 2000W; and the 350A for up to 3000W.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eNo cable is included with the Renogy Class T Fuse with Set. Cable must be sourced separately. This fuse set does not include ANL-style or MIDI fuses and is not interchangeable with those form factors.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the fuse element be replaced without replacing the entire housing?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes, the fuse element in the Renogy Class T Fuse with Set is replaceable. Loosening two bolts allows the fuse to be removed from the housing, making field replacement straightforward. Keeping a spare fuse element on hand is recommended for remote or off-grid installations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat stud or lug size does the fuse holder use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Class T Fuse with Set uses M8 (5\/16\") stud posts. Cable lugs sized for M8 studs are compatible with this holder.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich amperage rating should I choose for my inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eFor a 12V system, the 150A Class T Fuse with Set is sized for inverters up to 1000W, the 250A for inverters up to 2000W, and the 350A for inverters up to 3000W.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Renogy Class T Fuse with Set include a cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo cable is included. The Renogy Class T Fuse with Set contains only the fuse and housing assembly. Cable must be sourced separately.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"150A","offer_id":50656998522950,"sku":"RPD150CTF-SET-G1-US","price":26.99,"currency_code":"USD","in_stock":true},{"title":"250A","offer_id":50656998555718,"sku":"RPD250CTF-SET-G1-US","price":18.99,"currency_code":"USD","in_stock":true},{"title":"350A","offer_id":50656998588486,"sku":"RPD350CTF-SET-G1-US","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RPD150CTF-SET-_01__14569.1724858981.1280.1280.jpg?v=1792209582"},{"product_id":"renogy-3000w-12v-pro-pure-sine-wave-inverter-with-ecosleep-mode","title":"Renogy 3000W 12V Pro Pure Sine Wave Inverter with EcoSleep Mode","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 3000W 12V Pro Pure Sine Wave Inverter is a continuous-duty DC-to-AC inverter rated at 3000 watts continuous and 6000 watts surge, designed for overlanding rigs, vans, boats, and off-grid cabins running 12V house battery banks. It produces a pure sine wave output at 120Vac, making it compatible with sensitive electronics, inductive motor loads, and GFCI-protected marine circuits. The inverter ships with a wired remote control and supports optional Renogy ONE Core monitoring sold separately.\u003c\/p\u003e\n\n\u003ch2\u003e6000W Surge Headroom for Motor Loads\u003c\/h2\u003e\n\u003cp\u003eInductive loads (air conditioners, refrigerator compressors, microwave ovens, power tools) draw several times their running wattage at startup. The 6000W peak surge rating, sustained for up to 100 milliseconds, gives those loads the current spike they need to start cleanly without tripping the inverter's protection. That headroom reduces nuisance shutdowns when multiple appliances cycle on in sequence, which matters on a long overland trip or a live-aboard boat where reliable power is not optional.\u003c\/p\u003e\n\n\u003ch2\u003ePre-Charging and Dual-Polarity Reverse Protection\u003c\/h2\u003e\n\u003cp\u003eRenogy's pre-charging circuit controls the inrush current at startup, protecting both the inverter's internal components and the connected battery bank from the damaging current surges that occur when large capacitors charge from a dead stop. Dual-polarity reverse connection protection adds a second layer of reliability: if the DC cables are connected with reversed polarity, the inverter will not be damaged. Together these features reduce the risk of a costly installation mistake or a hard start destroying the unit in the field, where replacement is not straightforward.\u003c\/p\u003e\n\n\u003ch2\u003eEcoSleep Mode Cuts Idle Draw\u003c\/h2\u003e\n\u003cp\u003eWhen no load is detected, the inverter enters EcoSleep mode and drops its no-load power consumption to under 10 watts. On a 12V battery bank, parasitic draw from an always-on inverter is one of the fastest ways to drain capacity overnight. EcoSleep mode lets the inverter remain connected and ready without continuously pulling meaningful current from the bank, which extends usable battery runtime between charges during stationary camp or anchor situations.\u003c\/p\u003e\n\n\u003ch2\u003eGFCI Protection and IP21 Rating for Marine Use\u003c\/h2\u003e\n\u003cp\u003eThe inverter carries UL458 certification including the Marine supplement, and its AC output includes Ground Fault Circuit Interrupter (GFCI) protection. GFCI protection cuts power within milliseconds of detecting a ground fault, a critical safety feature in wet environments where shock risk is elevated. The IP21 ingress protection rating indicates resistance to vertically dripping water. These features make the inverter suitable for installation in boat cabins and other damp enclosures where a standard inverter without marine certification would not be appropriate.\u003c\/p\u003e\n\n\u003ch2\u003eBluetooth and RV-C Communication\u003c\/h2\u003e\n\u003cp\u003eBuilt-in Bluetooth and RS485\/RV-C communication allow real-time monitoring of inverter status through the Renogy mobile app and compatible RV-C network devices. The included wired remote control (approximately 16.4 ft cable) allows the inverter to be switched on and off from a distance without accessing the unit directly. This is useful when the inverter is mounted in a compartment, under a bed platform, or in a battery bay. The Renogy ONE Core display module, which provides panel-mounted monitoring, is sold separately and is not included.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePure sine wave output:\u003c\/strong\u003e 120Vac ±3% at 60Hz ±0.3Hz, THD under 3% on resistive loads\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThree AC output options:\u003c\/strong\u003e two standard AC sockets plus one DIY AC terminal for hardwired loads\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEcoSleep mode:\u003c\/strong\u003e idle power consumption under 10W when no load is detected\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePre-charging circuit:\u003c\/strong\u003e controls startup inrush current to protect the inverter and battery bank\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual-polarity reverse connection protection:\u003c\/strong\u003e prevents damage from reversed DC cable connections\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGFCI protection and UL458 Marine supplement certification:\u003c\/strong\u003e rated for marine installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Output Power\u003c\/td\u003e\n\u003ctd\u003e3000W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSurge Power (100ms)\u003c\/td\u003e\n\u003ctd\u003e6000W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e120Vac ±3%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Frequency\u003c\/td\u003e\n\u003ctd\u003e60Hz ±0.3Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Waveform\u003c\/td\u003e\n\u003ctd\u003ePure Sine Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAC Output Sockets\u003c\/td\u003e\n\u003ctd\u003e2× AC sockets + 1 DIY AC terminal\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eNominal Input Voltage\u003c\/td\u003e\n\u003ctd\u003e12VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003e11–15.5Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePeak Efficiency\u003c\/td\u003e\n\u003ctd\u003e≥90%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eFull-Load Efficiency\u003c\/td\u003e\n\u003ctd\u003e≥87%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eNo-Load Consumption (EcoSleep)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;10W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTHD\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3% (resistive load)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOverload Capacity\u003c\/td\u003e\n\u003ctd\u003e≥1 min @120%; ≥5s @150%; ≥100ms @200%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eShort Circuit Protection\u003c\/td\u003e\n\u003ctd\u003eSoftware protection\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eRS485 \/ RV-C; Bluetooth\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCompatible Battery Types\u003c\/td\u003e\n\u003ctd\u003eGEL, AGM, SLA, FLD, LI\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIP Rating\u003c\/td\u003e\n\u003ctd\u003eIP21\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature (Full Load)\u003c\/td\u003e\n\u003ctd\u003e-20°C to 40°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature (Derated)\u003c\/td\u003e\n\u003ctd\u003e40°C to 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to 70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003e0%–95%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eNoise\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;55dB\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e20.82 × 10.35 × 4.12 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e6 kg (13.228 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRemote Control Dimensions\u003c\/td\u003e\n\u003ctd\u003e2.8 × 4.3 × 1.3 in \/ 70 × 110 × 31.8 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRemote Wire Length\u003c\/td\u003e\n\u003ctd\u003eApprox. 16.4 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEMC\u003c\/td\u003e\n\u003ctd\u003eFCC Part 15 Class B\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSafety Certifications\u003c\/td\u003e\n\u003ctd\u003eUL458 (including Marine supplement) \/ CSA-C22.2 No. 107.1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 years (material and workmanship)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eRIV1230P2-126-G1-US\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWhat's Included\u003c\/td\u003e\n\u003ctd\u003e3000W Pure Sine Wave Inverter, wired remote control, user manual\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis inverter suits overlanders, van builders, boaters, and off-grid cabin owners running a 12V battery bank who need to power 120Vac appliances, including motor-driven loads like refrigerator compressors, microwaves, and power tools, at up to 3000 watts continuous. The UL458 Marine supplement certification and GFCI protection make it a fit for boat cabin installations where marine-rated equipment is required.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis inverter is designed for 12V DC input only and will not operate on a 24V or 48V battery bank. The Renogy ONE Core display panel is not included and must be purchased separately for panel-mounted monitoring. The IP21 rating covers vertically dripping water only and does not make the unit submersible or suitable for direct exposure to rain or spray.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill this inverter work with lithium (LiFePO4) batteries?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 3000W 12V Pro Pure Sine Wave Inverter lists LI (lithium) among its compatible battery types alongside GEL, AGM, SLA, and FLD. It accepts a 12V DC input in the range of 11–15.5Vdc, which covers the typical operating voltage of a 12V LiFePO4 bank. Battery sizing and BMS current limits should be confirmed against the inverter's 3000W continuous draw before installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is EcoSleep mode and when does it activate?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEcoSleep mode is an automatic idle state the Renogy 3000W inverter enters when it detects no connected load. In this state, the inverter's no-load power consumption drops to under 10 watts. The inverter wakes and resumes full output when a load is detected, allowing it to remain connected to the battery bank without continuously drawing significant current during periods of inactivity.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this inverter include GFCI protection for marine use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy 3000W 12V Pro Pure Sine Wave Inverter includes Ground Fault Circuit Interrupter (GFCI) protection on its AC output and carries UL458 certification including the Marine supplement. It also carries an IP21 water ingress protection rating. These features make it suitable for installation in boat cabin environments where marine-rated inverters are required.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the 3000W continuous rating and the 6000W surge rating?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 3000W continuous rating is the maximum steady-state load the Renogy 3000W inverter can sustain indefinitely under normal operating conditions. The 6000W surge rating is the peak power the inverter can deliver for up to 100 milliseconds to start inductive loads (motors, compressors, and similar appliances) that draw high current when first switched on. Running loads must not exceed 3000W combined for sustained operation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 3000W 12V Pro Pure Sine Wave Inverter ships with the inverter unit, one wired remote control (approximately 16.4 ft cable, remote dimensions 2.8 × 4.3 × 1.3 in), and a user manual. The Renogy ONE Core display panel is not included and is sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow much clearance does the inverter need for installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 3000W 12V Pro inverter requires at least 1.97 inches of clearance above the top of the unit and at least 4 inches of clearance on the side where the busbars are located. The inverter body measures 20.82 × 10.35 × 4.12 inches and weighs 6 kg (13.228 lb), so mounting surface load capacity and compartment dimensions should be confirmed before installation.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656998752326,"sku":"RIV1230P2-126-G1-US","price":824.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RIV1230P2-126-_01__56600.1751960289.1280.1280.jpg?v=1792209616"},{"product_id":"renogy-amphenol-to-3-8-in-lug-adapter-cable","title":"Renogy Amphenol to 3\/8 in Lug Adapter Cable","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Amphenol Adapter Cable connects Renogy devices with an Amphenol port to a battery bank or busbar fitted with 3\/8 in ring lug terminals, using 10AWG tinned copper wire rated for 70A continuous current and 600V. Color-coded BAT+ and BAT- conductors reduce wiring errors during installation. The cable is sold as a pair and is available in a 5 ft or 10 ft length.\u003c\/p\u003e\n\n\u003ch2\u003eLocked In, Even Off-Road\u003c\/h2\u003e\n\u003cp\u003eThe Amphenol connector uses an integrated locking mechanism that resists loosening from vibration and mechanical shock. For overlanding rigs, van builds, and trailer installations where road vibration is constant, a connection that stays seated without periodic retightening means one fewer failure point to monitor between trips.\u003c\/p\u003e\n\n\u003ch2\u003eWeatherproof from Connector to Lug\u003c\/h2\u003e\n\u003cp\u003eAn IP67 protection rating means the cable assembly is sealed against dust ingress and can withstand temporary water immersion, which matters for engine-bay or underfloor battery runs where condensation, rain intrusion, or wash-down is possible. The tinned copper conductor resists corrosion over time, and the cable is rated to operate across a temperature range of -40°C to 105°C (-40°F to 221°F), covering cold-weather storage and high-heat engine-compartment environments.\u003c\/p\u003e\n\n\u003ch2\u003eColor-Coded for Accurate Polarity\u003c\/h2\u003e\n\u003cp\u003eThe BAT+ and BAT- wires are color-coded throughout the cable length, so polarity is visually confirmed at both the Amphenol end and the ring lug end before any connection is made. This matters most during initial installation in tight spaces where a reversed connection could damage connected equipment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eAmphenol locking connector:\u003c\/strong\u003e integrated lock prevents loosening or deformation under vibration\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 rated:\u003c\/strong\u003e sealed against dust and temporary water immersion\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10AWG tinned copper wire:\u003c\/strong\u003e rated 70A continuous current, 600V\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eColor-coded conductors:\u003c\/strong\u003e BAT+ and BAT- labeled for polarity confirmation\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e one positive and one negative cable per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e5FT 10AWG\u003c\/th\u003e\n \u003cth\u003e10FT 10AWG\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRPC0510AR-G1-US\u003c\/td\u003e\n \u003ctd\u003eRPC1010AR-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e5 ft\u003c\/td\u003e\n \u003ctd\u003e10 ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire gauge\u003c\/td\u003e\n \u003ctd\u003e10AWG\u003c\/td\u003e\n \u003ctd\u003e10AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConductor\u003c\/td\u003e\n \u003ctd\u003eTinned copper\u003c\/td\u003e\n \u003ctd\u003eTinned copper\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated voltage\u003c\/td\u003e\n \u003ctd\u003e600V\u003c\/td\u003e\n \u003ctd\u003e600V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax continuous current\u003c\/td\u003e\n \u003ctd\u003e70A\u003c\/td\u003e\n \u003ctd\u003e70A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConnector (one end)\u003c\/td\u003e\n \u003ctd\u003eAmphenol (70A, C10-791435)\u003c\/td\u003e\n \u003ctd\u003eAmphenol (70A, C10-791435)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal (other end)\u003c\/td\u003e\n \u003ctd\u003e3\/8 in ring lugs (M8)\u003c\/td\u003e\n \u003ctd\u003e3\/8 in ring lugs (M8)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating temperature\u003c\/td\u003e\n \u003ctd\u003e-40°C to 105°C (-40°F to 221°F)\u003c\/td\u003e\n \u003ctd\u003e-40°C to 105°C (-40°F to 221°F)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection rating\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eUL, RoHS, ISO 9001\u003c\/td\u003e\n \u003ctd\u003eUL, RoHS, ISO 9001\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e3 years (material and workmanship)\u003c\/td\u003e\n \u003ctd\u003e3 years (material and workmanship)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight (shipped)\u003c\/td\u003e\n \u003ctd\u003e0.62 lb\u003c\/td\u003e\n \u003ctd\u003e1.21 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage contents\u003c\/td\u003e\n \u003ctd\u003e1 pair of cables\u003c\/td\u003e\n \u003ctd\u003e1 pair of cables\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis cable is for builders connecting a Renogy device with an Amphenol output port to a battery bank or busbar that uses 3\/8 in ring lug terminals, common in RV, van, trailer, and overlanding electrical systems where the Amphenol connector standard is already in use. The 5 ft length suits compact battery compartments; the 10 ft length accommodates longer runs between a charge controller or inverter and a remotely mounted battery.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cable terminates only in 3\/8 in (M8) ring lugs; installations requiring a different terminal size will need a different adapter. The 10AWG wire is rated to 70A; circuits requiring higher continuous current need a heavier gauge cable. An ANL fuse is not included and must be sourced separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices use the Amphenol connector this cable is designed for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Amphenol Adapter Cable is designed for Renogy devices that use the Amphenol 70A connector (specification C10-791435). The other end terminates in 3\/8 in (M8) ring lugs for connection to a battery bank or busbar. Confirm that the Renogy device in your system uses this Amphenol port before ordering.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes wire gauge affect how fast a battery charges?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWire gauge does not change the charge rate on its own. The charge controller or charger determines the current output. A heavier gauge wire allows more current to flow with less resistance over longer distances; undersized wire builds up heat as resistance increases. This cable's 10AWG conductor is rated for 70A continuous current at the lengths offered.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan the ring lug terminal be replaced if it is damaged?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe ring lug terminal on the Renogy Amphenol Adapter Cable is an M8 ring lug. If the terminal is damaged, a replacement terminal of the same M8 size can be crimped onto the wire. The Amphenol connector end uses the 70A Amphenol specification (C10-791435).\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs an ANL fuse included with this cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Renogy Amphenol Adapter Cable is sold as a pair of cables (positive and negative). An ANL fuse is not included and must be purchased separately for installations that require one between the cable and the battery bank.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"5 ft (10 AWG)","offer_id":50656999178310,"sku":"RPC0510AR-G1-US","price":59.99,"currency_code":"USD","in_stock":true},{"title":"10 ft (10 AWG)","offer_id":50656999211078,"sku":"RPC1010AR-G1-US","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1__79696.1735787371.1280.1280.jpg?v=1792209737"},{"product_id":"renogy-n-type-monocrystalline-solar-panel-100w-175w-200w","title":"Renogy N-Type Monocrystalline Solar Panel 100W \/ 175W \/ 200W","description":"\u003cp class=\"product-lead\"\u003eThe Renogy N-Type Monocrystalline Solar Panel is a rigid, aluminum-framed solar panel available in 100W, 175W, and 200W outputs, built for off-grid power systems in overlanding rigs, vans, RVs, and marine applications. N-Type monocrystalline cells with 9 busbars and PERC technology deliver a module efficiency of 19.2% (200W variant), with a guaranteed positive output tolerance of 0%–3% across all three wattage options.\u003c\/p\u003e\n\n\u003ch2\u003eN-Type Cells: More Output from the Same Sunlight\u003c\/h2\u003e\n\u003cp\u003eN-Type monocrystalline cells outperform conventional PERC cells in heat tolerance and long-term output stability. For an overlander or van-dweller running a panel through years of sun, heat, and vibration, that translates to more usable energy per day and less degradation over the life of the system. Renogy states first-year power loss at 1% or less, which matters when sizing a battery bank for a multi-day trip far from a grid connection.\u003c\/p\u003e\n\u003cp\u003eHalf-cut cell construction and bypass diodes keep the panel producing even when part of its surface is shaded (by a roof rack crossbar, a vent, or a tree branch). Rather than losing output from the entire panel when one section is blocked, the bypass diodes route current around the shaded cells, so the rest of the panel continues converting sunlight normally.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Stay Mounted Through Rough Conditions\u003c\/h2\u003e\n\u003cp\u003eThe anodized aluminum alloy frame is rated to withstand wind loads of 2,400 Pa (approximately 50 psf) and snow loads of 5,400 Pa (approximately 550 kg\/m²). For a panel mounted on a roof rack or van roof that sees highway speeds, trail vibration, and winter storms, those structural ratings mean the frame stays true and the glass stays sealed. Reinforced frame corners reduce impact damage during installation and transport.\u003c\/p\u003e\n\u003cp\u003eThe junction box carries an IP65 rating and the connectors carry an IP67 rating, providing protection against dust ingress and rain. The panel construction layers tempered low-iron glass over EVA and POE encapsulant layers, chosen for long-term durability through changing weather and UV exposure.\u003c\/p\u003e\n\n\u003ch2\u003eFast Installation with Flexible Mounting Options\u003c\/h2\u003e\n\u003cp\u003ePre-drilled holes on the panel back allow direct mounting to Renogy Z-Brackets, Pole Mounts, and Tilt Mounts without drilling the frame. The 200W panel ships with a 13 AWG output cable, 2.6 ft (0.9 m) long, terminated with solar connectors. A charge controller, battery, adapter kit cables, and tray cables are required to complete an off-grid system and are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN-Type monocrystalline cells:\u003c\/strong\u003e 9 busbars and PERC technology for 19.2% module efficiency (200W)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHalf-cut cells with bypass diodes:\u003c\/strong\u003e maintain output under partial shading and protect against hotspot overheating\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePositive output tolerance:\u003c\/strong\u003e 0%–3%, ensuring rated power or better at standard test conditions\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWind and snow rated:\u003c\/strong\u003e 2,400 Pa wind load and 5,400 Pa snow load resistance\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65 junction box \/ IP67 connectors:\u003c\/strong\u003e dust- and rain-resistant for all-weather outdoor use\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePre-drilled mounting holes:\u003c\/strong\u003e compatible with Renogy Z-Brackets, Pole Mounts, and Tilt Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e200W\u003c\/th\u003e\n \u003cth\u003e175W\u003c\/th\u003e\n \u003cth\u003e100W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Type\u003c\/td\u003e\n \u003ctd\u003eN-Type Monocrystalline\u003c\/td\u003e\n \u003ctd\u003eN-Type Monocrystalline\u003c\/td\u003e\n \u003ctd\u003eN-Type Monocrystalline\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Power at STC\u003c\/td\u003e\n \u003ctd\u003e200W\u003c\/td\u003e\n \u003ctd\u003e175W\u003c\/td\u003e\n \u003ctd\u003e100W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eModule Efficiency\u003c\/td\u003e\n \u003ctd\u003e19.2%\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e23V\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Voltage (Vmp)\u003c\/td\u003e\n \u003ctd\u003e19.2V\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShort Circuit Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e11.05A\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Current (Imp)\u003c\/td\u003e\n \u003ctd\u003e10.42A\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum System Voltage\u003c\/td\u003e\n \u003ctd\u003e600 VDC UL\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSolar Cells\u003c\/td\u003e\n \u003ctd\u003e68 Cells (4×17)\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Cable\u003c\/td\u003e\n \u003ctd\u003e13 AWG, 2.6 ft (0.9 m)\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e58.7 × 27.5 × 1.38 in \/ 1491 × 699 × 35 mm\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e26.46 lb (12 kg)\u003c\/td\u003e\n \u003ctd\u003e23.15 lb\u003c\/td\u003e\n \u003ctd\u003e14.99 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFrame\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eAnodized Aluminium Alloy\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eJunction Box Rating\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eIP65\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConnector Rating\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to 194°F \/ -40°C to 90°C\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003ctd\u003eNot provided\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWind Load Resistance\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e2,400 Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSnow Load Resistance\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e5,400 Pa\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Tolerance\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e0% to +3%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e12V and 24V systems\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePower Output Warranty\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e25 years (5yr\/95%, 10yr\/90%, 25yr\/80%)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaterial and Workmanship Warranty\u003c\/td\u003e\n \u003ctd colspan=\"3\"\u003e5 years\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese panels suit overlanders, van-dwellers, RV owners, and boaters building or expanding a 12V or 24V off-grid solar system. The three wattage options let buyers match panel output to available roof space and power demand, and the pre-drilled frame makes roof mounting straightforward with compatible Renogy mounting hardware.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eA charge controller, battery bank, adapter cables, and tray cables are not included and must be purchased separately to build a functioning system. Electrical specifications beyond weight are available for the 200W variant only; buyers sizing a charge controller or calculating string voltage for the 100W or 175W variants should obtain those panels' datasheets before selecting a controller.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat else do I need to build a working off-grid solar system with this panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy N-Type Solar Panel must be paired with a charge controller to regulate current, a deep-cycle battery to store power, adapter kit cables to connect the panel to the controller, and tray cables from the controller to the battery. None of those components are included with the panel and are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the positive output tolerance mean for real-world performance?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA 0%–3% positive output tolerance means the panel is tested to produce at or above its rated wattage at standard test conditions. For the 200W variant, that means the panel delivers 200W to 206W under ideal conditions, never below its nameplate rating. This matters when sizing a charge controller or battery bank.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do half-cut cells and bypass diodes help when part of the panel is shaded?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIn a conventional panel, shading one section can drag down output from the entire string. The Renogy N-Type Solar Panel uses half-cut cells and bypass diodes so that shaded sections are routed around electrically, allowing the unshaded portion of the panel to continue producing power. This is particularly useful on vehicle roofs where a rack crossbar, vent, or antenna casts a partial shadow.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan these panels be wired in series, in parallel, or both?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy N-Type Solar Panel supports series, parallel, and combined series-parallel wiring. Wiring panels in series adds their voltages while keeping current the same; wiring in parallel adds their currents while keeping voltage the same. The wiring method affects which charge controller is compatible, so the controller's maximum PV input voltage must be confirmed against the string voltage before connecting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat mounting hardware is compatible with this panel?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003ePre-drilled holes on the back of the Renogy N-Type Solar Panel are compatible with Renogy Z-Brackets, Pole Mounts, and Tilt Mounts. Mounting hardware is not included with the panel and is sold separately.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"200W","offer_id":50656999243846,"sku":"RSP200DC-G1-US","price":179.99,"currency_code":"USD","in_stock":true},{"title":"175W","offer_id":50656999276614,"sku":"RSP175DC-G1-US","price":159.99,"currency_code":"USD","in_stock":true},{"title":"100W","offer_id":50656999309382,"sku":"RSP100DC-G1-US","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1__73574.1751963554.1280.1280.jpg?v=1792209748"},{"product_id":"renogy-12v-100ah-duoheat-lifepo4-battery-with-self-heating","title":"Renogy 12V 100Ah DuoHeat LiFePO4 Battery with Self-Heating","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 12V 100Ah DuoHeat LiFePO4 Battery is a Group 22NF lithium iron phosphate house battery built for overlanding rigs, van builds, off-grid trailers, and cabin systems that operate in freezing conditions. Its integrated DuoHeat dual-heating pad system delivers 110W of thermal output, activating automatically at 41°F (5°C) to enable charging down to -22°F (-30°C), a range where standard lithium batteries cannot accept a charge. The battery ships in a single-unit configuration and can be wired in series or parallel up to a 4S4P arrangement.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Cold-Weather Charging\u003c\/h2\u003e\n\u003cp\u003eThe DuoHeat system addresses the most common failure point of lithium batteries in winter use: the inability to accept a charge when cell temperature drops below freezing. The dual heating pads draw from an incoming charge source, warming the cells automatically when cell temperature falls to 41°F (5°C) and shutting off once cells reach 50°F (10°C) to avoid wasting energy. This means a battery stored in a cold truck bed or trailer overnight can begin accepting a charge without manual intervention or moving the battery indoors. Renogy states the battery can reach ready-to-charge status from as low as -22°F (-30°C) in approximately 60 minutes under these conditions.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Footprint, Full 100Ah Capacity\u003c\/h2\u003e\n\u003cp\u003eThe battery occupies a Group 22NF footprint: 9.02 × 5.43 × 8.39 inches (229 × 138 × 213 mm), which Renogy states is 45% smaller than comparable-capacity batteries. At 21.38 lbs (9.7 kg), the compact size and reduced weight matter in tight battery compartments common to truck campers, drawer systems, and van builds where every cubic inch of space competes with other gear. The smaller envelope also simplifies retrofitting into existing battery trays designed for Group 22NF lead-acid batteries.\u003c\/p\u003e\n\n\u003ch2\u003eLong Cycle Life and Comprehensive BMS Protection\u003c\/h2\u003e\n\u003cp\u003eGrade-A LiFePO4 cells are rated for 5,000 cycles at 80% depth of discharge (tested at 0.5C, 77°F\/25°C), which Renogy states exceeds industry standards for this chemistry. The integrated 100A Battery Management System monitors and protects against overcharge, over-discharge, overcurrent, short circuit, temperature extremes, and reverse polarity, covering more than 25 protective functions in total. Cell balancing runs continuously to keep individual cells within safe operating parameters, which preserves capacity over the battery's service life rather than allowing one weak cell to drag down the pack.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDuoHeat dual-heating pads:\u003c\/strong\u003e 110W combined output activates at 41°F (5°C), enables charging from -22°F (-30°C)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGroup 22NF form factor:\u003c\/strong\u003e 9.02 × 5.43 × 8.39 in, 21.38 lbs, fits standard Group 22NF battery trays\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e100A BMS with 25+ protections:\u003c\/strong\u003e covers temperature, current, voltage, cell balancing, and reverse polarity\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e5,000-cycle rated life:\u003c\/strong\u003e at 80% DOD, 0.5C rate, 77°F\/25°C test conditions\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65 enclosure:\u003c\/strong\u003e dust-tight and splash-resistant for exposed or outdoor installations\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUp to 4S4P scalability:\u003c\/strong\u003e series and parallel connections supported for larger system builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Type\u003c\/td\u003e\n\u003ctd\u003eLithium Iron Phosphate (LiFePO4)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Capacity\u003c\/td\u003e\n\u003ctd\u003e100Ah (0.5C, 25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage Range\u003c\/td\u003e\n\u003ctd\u003e10V to 14.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Voltage\u003c\/td\u003e\n\u003ctd\u003e14.6V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge Current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Discharge Current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n\u003ctd\u003e300A (10 seconds)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e5,000 cycles at 80% DOD (0.5C, 77°F\/25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e9.02 × 5.43 × 8.39 in (229 × 138 × 213 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e21.38 lbs (9.7 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eGroup Size\u003c\/td\u003e\n\u003ctd\u003eGroup 22NF\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminal Bolt Size\u003c\/td\u003e\n\u003ctd\u003eM8 × 1.25 × 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRecommended Terminal Torque\u003c\/td\u003e\n\u003ctd\u003e53.1 to 70.8 inch-lbs (6 to 8 N·m)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eConnection\u003c\/td\u003e\n\u003ctd\u003eSeries and Parallel, up to 4S4P\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (dust-tight and splash-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-22°F to 131°F (-30°C to 55°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDischarge Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-4°F to 140°F (-20°C to 60°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-4°F to 113°F (-20°C to 45°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Humidity\u003c\/td\u003e\n\u003ctd\u003e10% to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSelf-Heating Activation\u003c\/td\u003e\n\u003ctd\u003e41°F (5°C) cell temperature; deactivates at 50°F (10°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSelf-Heating Power\u003c\/td\u003e\n\u003ctd\u003e110W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBluetooth\u003c\/td\u003e\n\u003ctd\u003eNone built in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eMSDS, UN38.3, FCC, CE, PSE, IC, RoHS, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInstallation Clearance\u003c\/td\u003e\n\u003ctd\u003e1.97–3.94 in (5–10 cm) above; 7.87 in (20 cm) on busbar side\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIncluded in Box\u003c\/td\u003e\n\u003ctd\u003eBattery, M8 × 1.25 × 12 mm terminal bolts (×2), insulating sleeves (×2), user manual\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 12V 100Ah DuoHeat LiFePO4 Battery suits overlanders, van builders, and off-grid cabin or trailer owners who need a compact 12V house battery that can charge reliably in sub-freezing conditions without manual warm-up steps. The Group 22NF footprint makes it a direct-fit replacement for existing Group 22NF battery trays, and the 4S4P expansion capability supports larger system builds.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis battery does not include built-in Bluetooth monitoring; an external Renogy monitoring device is required for real-time status tracking. The battery does not discharge reliably below -4°F (-20°C), and charging halts if cell temperature drops below 32°F (0°C) until the heating pads restore cell temperature. Restoring cell temperature requires an active charge source supplying at least 10A per battery to trigger the heating function. Cables, charge controllers, inverters, and fuses are sold separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the self-heating function work automatically, or does it need to be switched on?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe DuoHeat system in the Renogy 12V 100Ah LiFePO4 Battery activates automatically when cell temperature drops to 41°F (5°C) and shuts off once cells reach 50°F (10°C). No manual switch is required. The heating function draws power from an incoming charge source, so a charge source supplying at least 10A per battery must be connected for the heating pads to operate.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the lowest temperature at which this battery can charge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah DuoHeat LiFePO4 Battery can accept a charge from as low as -22°F (-30°C) because the integrated heating pads warm the cells before charging begins. Standard LiFePO4 batteries without self-heating stop accepting a charge at 32°F (0°C). If cell temperature is below 32°F (0°C), charging pauses until the heating system brings cells to that threshold.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this battery be connected to other batteries to increase capacity or voltage?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah DuoHeat LiFePO4 Battery supports series and parallel connections up to a 4S4P configuration, allowing builders to scale voltage or capacity for larger off-grid systems. Cables, busbars, and fusing hardware for multi-battery configurations are not included and must be sourced separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this battery have Bluetooth monitoring built in?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah DuoHeat LiFePO4 Battery does not include built-in Bluetooth. Renogy states the battery is compatible with Renogy external monitoring devices that provide real-time status, current usage, and system health data; those devices are sold separately.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does IP65 mean for this battery's installation options?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIP65 means the Renogy 12V 100Ah DuoHeat LiFePO4 Battery's enclosure is rated dust-tight and resistant to water splashing from any direction. This allows installation in exposed locations such as truck bed battery boxes or open trailer compartments, though the battery should not be submerged or subjected to sustained water jets beyond what splash-resistance covers.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656999342150,"sku":"RBT12100LFP-H-G1-US","price":356.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__70495.1750405640.1280.1280.jpg?v=1792209756"},{"product_id":"renogy-2000w-24v-pure-sine-wave-inverter","title":"Renogy 2000W 24V Pure Sine Wave Inverter","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 2000W 24V Pure Sine Wave Inverter converts 24V DC battery power to 120V AC at up to 2000 watts continuous, with a 4000W surge rating for inductive loads, making it suited to overlanding rigs, vans, boats, and off-grid cabins running 24V house battery banks. It ships with a wired remote control and two inverter cables. Two AC sockets plus a terminal block provide connection flexibility for a range of AC loads.\u003c\/p\u003e\n\n\u003ch2\u003eClean Power for Sensitive Electronics and Motor Loads\u003c\/h2\u003e\n\u003cp\u003eA pure sine wave output keeps total harmonic distortion below 3%, which matters when running laptops, audio equipment, medical devices, or any load that reacts poorly to the stepped waveform of a modified sine wave inverter. Motors and compressors run cooler and draw less current on a clean sine wave, which reduces wear and lowers the risk of nuisance trips during extended use.\u003c\/p\u003e\n\n\u003ch2\u003e4000W Surge Headroom for Inductive Loads\u003c\/h2\u003e\n\u003cp\u003eInductive loads (refrigerator compressors, air conditioner motors, power tools) draw several times their running current at startup. The Renogy 2000W 24V inverter handles surge demands up to 4000W for two seconds, giving motors enough headroom to spin up without tripping the inverter's protection. Starting the highest-draw inductive load first, before switching on additional appliances, keeps total startup current within the inverter's surge window.\u003c\/p\u003e\n\n\u003ch2\u003eEfficiency and Thermal Management\u003c\/h2\u003e\n\u003cp\u003eThe inverter reaches up to 92% conversion efficiency, meaning less energy is lost as heat during conversion and more of the stored battery capacity reaches the AC load. Thermally controlled fans run only as needed, reducing noise during light loads and extending fan life. Idle power consumption stays below 19.2W, which limits parasitic draw when loads are light or the inverter is on standby.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePure sine wave output:\u003c\/strong\u003e 120V AC ±3%, THD below 3%, Power Factor 1\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e4000W surge rating:\u003c\/strong\u003e handles inductive load startup surges for up to 2 seconds\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWired remote control included:\u003c\/strong\u003e 16.40 ft cable lets you switch the inverter on or off from a distance\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTwo AC outputs plus terminal block:\u003c\/strong\u003e M8-1.25×25 DC terminals; 2 × AC sockets and a terminal block for wired AC runs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThermally controlled cooling fans:\u003c\/strong\u003e fans activate based on temperature rather than running continuously\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBattery protection thresholds:\u003c\/strong\u003e low-voltage alarm at 22.4VDC, shutdown at 21.8VDC, overvoltage shutdown at 33.3VDC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eContinuous Output Power\u003c\/td\u003e\n\u003ctd\u003e2000W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSurge Rating\u003c\/td\u003e\n\u003ctd\u003e4000W (@ 2s)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Waveform\u003c\/td\u003e\n\u003ctd\u003ePure Sine Wave\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e120V AC ±3%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Frequency\u003c\/td\u003e\n\u003ctd\u003e50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eContinuous Output Current\u003c\/td\u003e\n\u003ctd\u003e16.6A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTotal Harmonic Distortion (THD)\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;3%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePower Factor\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Battery Input Voltage\u003c\/td\u003e\n\u003ctd\u003e24VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Input Voltage Range\u003c\/td\u003e\n\u003ctd\u003e23–30.7VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Battery Output Current\u003c\/td\u003e\n\u003ctd\u003e106A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInverter Efficiency (max)\u003c\/td\u003e\n\u003ctd\u003e92%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eFull Load Efficiency\u003c\/td\u003e\n\u003ctd\u003e89%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIdle Power Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;19.2W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Overvoltage Shutdown\u003c\/td\u003e\n\u003ctd\u003e33.3VDC ±0.5VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Low Voltage Alarm\u003c\/td\u003e\n\u003ctd\u003e22.4VDC ±0.5VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBattery Low Voltage Shutdown\u003c\/td\u003e\n\u003ctd\u003e21.8VDC ±0.5VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAC Terminals\u003c\/td\u003e\n\u003ctd\u003e2 × AC Sockets + Terminal Block\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDC Terminals\u003c\/td\u003e\n\u003ctd\u003eM8-1.25×25\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWired Remote Cable Length\u003c\/td\u003e\n\u003ctd\u003e16.40 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-4°F–131°F \/ -20°C–55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°F–158°F \/ -40°C–70°C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eMax 95%, Non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eThermally Controlled Fans\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L × W × H)\u003c\/td\u003e\n\u003ctd\u003e16.94 × 8.99 × 3.75 in \/ 430.3 × 228.4 × 95.3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e10.14 lb \/ 4.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEMC\u003c\/td\u003e\n\u003ctd\u003eFCC Part 15 Class B\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSafety Certifications\u003c\/td\u003e\n\u003ctd\u003eUL458 (including Marine supplement) \/ CSA-C22.2 No 107.1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e1 Year (material and workmanship)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIn the Box\u003c\/td\u003e\n\u003ctd\u003eRenogy 2000W 24V Pure Sine Wave Inverter ×1, Inverter Remote Control ×1, Inverter Cables ×2\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 2000W 24V Pure Sine Wave Inverter suits overlanders, van builders, boaters, and off-grid cabin owners who have built or are building a 24V house battery bank and need clean AC power for sensitive electronics, motor-driven appliances, or both. The UL458 Marine supplement certification makes it a documented choice for marine DC electrical systems.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis inverter requires a 24V DC source within the 23–30.7VDC input range; it is not compatible with 12V or 48V battery banks. The IP20 enclosure rating does not protect against water ingress, so the inverter must be installed in a dry, ventilated interior location away from rain, spray, and condensation. It does not include a battery, charge controller, or solar panels.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between a pure sine wave inverter and a modified sine wave inverter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W 24V Pure Sine Wave Inverter produces a smooth AC waveform with total harmonic distortion below 3%, closely matching utility grid power. A modified sine wave inverter produces a stepped waveform that can cause noise, heat, and reduced efficiency in motors and may cause glitches or shortened lifespan in sensitive electronics such as computers and audio equipment.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan this inverter handle appliances with high startup current, like a refrigerator compressor or air conditioner?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W 24V inverter has a 4000W surge rating for up to two seconds, which provides headroom for the high inrush current inductive loads draw at startup. Starting the highest-draw inductive load first, before switching on other appliances, helps keep total startup current within the inverter's surge capacity and reduces the risk of a protection trip.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this inverter suitable for use on a boat?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W 24V Pure Sine Wave Inverter carries UL458 certification including the Marine supplement, which covers its use in marine DC electrical systems. The IP20 enclosure rating does not protect against water spray or splash, so the inverter must be installed in a dry, ventilated interior location. Grounding the inverter to the boat's electrical ground and using GFCI outlets on the AC side are standard safety practices for marine installations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many appliances can run simultaneously?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 2000W 24V inverter supports a combined continuous AC load of up to 2000 watts across its two AC sockets and terminal block. Running loads whose combined wattage exceeds 2000W will trigger the inverter's overload protection. Checking the running wattage of each appliance before connecting multiple loads helps avoid tripping the protection.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the wired remote control do, and how far does the cable reach?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe included wired remote control lets you switch the Renogy 2000W 24V inverter on or off from a distance without reaching the inverter itself, which is useful when the unit is mounted under a seat, in a cabinet, or in another out-of-reach location. The remote cable is 16.40 ft long.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656999374918,"sku":"RIV2420P2-12S-G1-US","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RIV2420P2-_01__21952.1751960341.1280.1280.jpg?v=1792209757"},{"product_id":"renogy-120v-30-amp-automatic-transfer-switch-for-off-grid-systems","title":"Renogy 120V 30 Amp Automatic Transfer Switch for Off-Grid Systems","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 120V 30 Amp Automatic Transfer Switch is a relay-based switching unit rated for 30A at 120VAC\/60Hz, designed to automatically shift between two power sources in off-grid, RV, van, and cabin electrical systems. The ABS shell houses a built-in 20–30 second time delay to protect connected loads during source transitions. One unit is included per order.\u003c\/p\u003e\n\n\u003ch2\u003eAutomatic Switching Without Manual Intervention\u003c\/h2\u003e\n\u003cp\u003eWhen grid power fails or a generator comes online, the Renogy 30 Amp Transfer Switch detects the change and shifts the load automatically using its internal relay. The built-in 20–30 second time delay prevents rapid cycling between sources, which can stress inverters, generators, and sensitive electronics. For an overlanding rig or cabin where power transitions happen without anyone watching the panel, that automatic handoff means connected loads keep running without a manual flip of a breaker or switch.\u003c\/p\u003e\n\n\u003ch2\u003eRated for Real Loads at 30 Amps\u003c\/h2\u003e\n\u003cp\u003eAt 30A continuous and 120VAC, this transfer switch covers the shore-power or generator circuits common in RV and van builds. That rating provides enough headroom for a converter charger, air conditioner circuit, or a bank of outlets feeding camp equipment. The 3000A RMS symmetrical fault current rating indicates the switch is built to handle the short-circuit currents that can appear in properly protected residential and RV-grade panels, not just steady-state loads.\u003c\/p\u003e\n\n\u003ch2\u003eStraightforward Panel Integration\u003c\/h2\u003e\n\u003cp\u003eThe 8 × 8 × 3 inch ABS enclosure provides four M5 mounting points and ten 0.91-inch knockout holes for conduit or cable entry, so the switch can be surface-mounted in a van electrical cabinet, a trailer utility bay, or a cabin sub-panel without custom fabrication. Relay and ground bar cables in the 6–14 AWG range are supported, covering the wire gauges typical of 30A branch circuits. Installation requires a qualified electrician and must follow local electrical safety codes.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRelay-based automatic switching:\u003c\/strong\u003e transfers load between two 120VAC sources with no manual intervention\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBuilt-in time delay:\u003c\/strong\u003e 20–30 second relay delay prevents rapid source cycling\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e30A \/ 120VAC \/ 60Hz rating:\u003c\/strong\u003e sized for standard RV and residential branch circuits\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e3000A RMS symmetrical fault current rating:\u003c\/strong\u003e compatible with properly protected panels\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e10 knockout holes (0.91 inch):\u003c\/strong\u003e flexible conduit and cable routing options\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eABS enclosure with 4 × M5 mounting points:\u003c\/strong\u003e surface-mountable in cabinets or utility bays\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Voltage\u003c\/td\u003e\n \u003ctd\u003e120VAC, 60Hz\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSwitch Type\u003c\/td\u003e\n \u003ctd\u003eRelay (20–30 sec delay)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRMS Symmetrical Amps\u003c\/td\u003e\n \u003ctd\u003e3000A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Gauge (relay and ground bar)\u003c\/td\u003e\n \u003ctd\u003e6–14 AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShell Material\u003c\/td\u003e\n \u003ctd\u003eABS\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e8 × 8 × 3 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e2.36 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMounting\u003c\/td\u003e\n \u003ctd\u003e4 × M5 knockout holes\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eKnockout Holes\u003c\/td\u003e\n \u003ctd\u003e10 × 0.91 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStandard\u003c\/td\u003e\n \u003ctd\u003eETL listed\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e1-year material and workmanship\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Contents\u003c\/td\u003e\n \u003ctd\u003e120V 30 Amp Automatic Transfer Switch × 1\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 120V 30 Amp Automatic Transfer Switch suits builders of RV, van, trailer, and off-grid cabin electrical systems who need automatic source switching between shore power, a generator, or an inverter on a 120VAC\/60Hz, 30A branch circuit. Installation must be performed by a qualified electrician in accordance with local electrical safety codes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis switch is rated for 120VAC\/60Hz only and is not suitable for 240V, 50A, or DC applications. It does not include wiring, conduit, a sub-panel, or any additional electrical components; those must be sourced separately. It is not a surge protector or a UPS.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I choose the right transfer switch amperage for my system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eSelecting the correct transfer switch starts with identifying the maximum current draw of all devices that will run on the circuit simultaneously. The Renogy 30 Amp Transfer Switch is rated for 30A at 120VAC\/60Hz; if the combined load of connected devices exceeds 30A, a higher-rated switch is required. Verify that the input voltage of your power sources matches 120VAC\/60Hz before installation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes this transfer switch require a licensed electrician to install?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy 120V 30 Amp Automatic Transfer Switch involves line-voltage AC connections and must be installed by a qualified electrician following local electrical safety codes and standards. Before installation, confirm the power and current ratings of all connected devices do not exceed the switch's 30A maximum to avoid overloading the circuit.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauges are compatible with this transfer switch?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 30 Amp Transfer Switch supports 6–14 AWG cables for the relay and ground bar connections. Use cables or conduits of appropriate size for any reserved wiring holes. Consult the product manual's wiring diagram and disconnect all power before making any connections.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat should I do if the transfer switch fails or shows sparks or smoke?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eIf the Renogy 30 Amp Transfer Switch shows signs of failure (including sparks or smoke), immediately turn off the switch and disconnect the power supply. Do not attempt self-repair. Contact a qualified electrician for inspection; possible causes include poor wiring, overload, or internal failure. Do not restore power until a professional has assessed the unit.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656999440454,"sku":"RTS1230-G1-US","price":102.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RTS1230-1__84590.1746526838.1280.1280.jpg?v=1792209853"},{"product_id":"renogy-core-series-12v-100ah-lifepo4-trolling-motor-battery-with-bluet","title":"Renogy Core Series 12V 100Ah LiFePO4 Trolling Motor Battery with Bluetooth","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Core Series 12V 100Ah LiFePO4 Trolling Motor Battery is a lithium iron phosphate house battery built for marine, overlanding, and off-grid power systems, rated for 150A continuous discharge and 300A peak discharge for 30 seconds. At 21.83 lbs in a Group 24 footprint, it delivers 1280Wh of usable energy with IP67 waterproof protection and built-in Bluetooth 5.3 for real-time monitoring via the Renogy App. One variant is available.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for the Demands of On-Water and Off-Road Use\u003c\/h2\u003e\n\u003cp\u003eAn IP67 waterproof rating means the battery is fully protected against dust ingress and temporary submersion, a meaningful distinction for a battery mounted in a boat hull, truck bed, or trailer where water exposure is routine rather than exceptional. The marine-grade protection is built into the enclosure itself, not added as an afterthought, so the battery does not require a separate waterproof box to meet that standard.\u003c\/p\u003e\n\u003cp\u003eThe 150A BMS includes low-temperature cut-off, which prevents charging below the rated threshold and protects cell chemistry during cold-weather launches or winter overlanding trips. The operating discharge range of -4°F to 131°F (-20°C to 55°C) covers the conditions most users encounter, while the charge range of 32°F to 131°F (0°C to 55°C) reflects the low-temperature protection built into the BMS.\u003c\/p\u003e\n\n\u003ch2\u003eTrolling Motor Compatibility and Scalable Voltage\u003c\/h2\u003e\n\u003cp\u003eThe battery supports 12V to 36V trolling motors. A single battery runs 30 to 55 lb thrust motors; two batteries connected in series power 70 to 90 lb thrust motors; three in series support 112 to 115 lb thrust motors. Compatibility includes Minn Kota and other major trolling motor brands. The same scalability applies to off-grid and RV systems: up to four batteries can be connected in series and four in parallel (4S4P, 16 batteries total), reaching a combined capacity of 20.48 kWh.\u003c\/p\u003e\n\n\u003ch2\u003eReal-Time Monitoring via Bluetooth 5.3\u003c\/h2\u003e\n\u003cp\u003eThe built-in Bluetooth 5.3 module connects to the Renogy App, giving the user access to system overview data, battery status, and fault alerts without opening a panel or reading a physical gauge. For a battery mounted in a hard-to-reach compartment on a boat or in a truck bed box, the ability to check state of charge and receive fault notifications remotely reduces the need to physically inspect the battery during a trip.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e150A Continuous \/ 300A Peak Discharge:\u003c\/strong\u003e handles high-draw trolling motors and off-grid inverter loads\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 Waterproof:\u003c\/strong\u003e fully sealed against dust and temporary submersion for marine and outdoor installations\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBluetooth 5.3:\u003c\/strong\u003e connects to the Renogy App for real-time battery status, fault alerts, and system overview\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e150A BMS with Low-Temp Cut-Off:\u003c\/strong\u003e protects cell chemistry during cold-weather charging\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGroup 24 Footprint:\u003c\/strong\u003e fits existing battery trays sized for Group 24 without modification\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e4S4P Expandable:\u003c\/strong\u003e up to 16 batteries in series-parallel for systems up to 20.48 kWh\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRated Capacity\u003c\/td\u003e\n\u003ctd\u003e100Ah (0.5C, 25°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eEnergy\u003c\/td\u003e\n\u003ctd\u003e1280Wh\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCycle Life\u003c\/td\u003e\n\u003ctd\u003e5000 cycles (0.5C\/1C, 25°C, 80% DOD)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Charge Current\u003c\/td\u003e\n\u003ctd\u003e100A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Voltage Range\u003c\/td\u003e\n\u003ctd\u003e10.8V to 14.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Continuous Discharge Current\u003c\/td\u003e\n\u003ctd\u003e150A\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePeak Discharge Current\u003c\/td\u003e\n\u003ctd\u003e300A @ 30s\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBMS\u003c\/td\u003e\n\u003ctd\u003e150A with low-temperature cut-off\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCharge Temperature\u003c\/td\u003e\n\u003ctd\u003e32°F to 131°F (0°C to 55°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDischarge Temperature\u003c\/td\u003e\n\u003ctd\u003e-4°F to 131°F (-20°C to 55°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e32°F to 113°F (0°C to 45°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperating Relative Humidity\u003c\/td\u003e\n\u003ctd\u003e5% to 95%\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimensions (L x W x H)\u003c\/td\u003e\n\u003ctd\u003e10.24 x 6.61 x 8.23 in \/ 260 x 168 x 209 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e21.83 lbs \/ 9.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eGroup Size\u003c\/td\u003e\n\u003ctd\u003eGroup 24\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminal Bolt Size\u003c\/td\u003e\n\u003ctd\u003eM8 x 1.25 x 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eProtection Rating\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBluetooth\u003c\/td\u003e\n\u003ctd\u003e5.3\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTrolling Motor Voltage Support\u003c\/td\u003e\n\u003ctd\u003e12V to 36V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMax Series-Parallel Configuration\u003c\/td\u003e\n\u003ctd\u003e4S4P (16 batteries, up to 20.48 kWh)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eRCM, MSDS, UN38.3, FCC, CE, PSE, IC, RoHS, UKCA\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5-year prorated material and workmanship\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIncluded in Box\u003c\/td\u003e\n\u003ctd\u003eBattery x1, Long Terminal Bolts x2, Insulating Sleeves x2, User Manual x1\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eRBT12100LFP-TM-BT-G2-US\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis battery suits anglers running Minn Kota or comparable trolling motors from 30 to 115 lb thrust (using one to three batteries in series), overlanders and van-build owners building 12V to 36V house battery banks, and off-grid cabin or trailer setups where IP67 waterproofing, a compact Group 24 footprint, and remote Bluetooth monitoring are priorities.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis battery does not include a solar charge controller, DC-DC charger, or inverter; those components must be sourced separately and must be rated compatible with lithium iron phosphate chemistry. Charging is not supported below 32°F (0°C) due to the BMS low-temperature cut-off, so installations in unheated environments that regularly drop below freezing require a self-heating battery or an external heating solution not included here. Installation requires a minimum clearance of 1.97 to 3.94 inches above the battery and at least 7.87 inches on the busbar side.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat trolling motor thrust ratings is this battery designed to support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah Trolling Motor LiFePO4 Battery supports 12V to 36V trolling motors. A single battery is suited for 30 to 55 lb thrust motors. Two batteries connected in series support 70 to 90 lb thrust motors. Three batteries in series support 112 to 115 lb thrust motors. Compatibility includes Minn Kota and other major trolling motor brands.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this battery be connected in series or parallel to build a larger system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah Trolling Motor LiFePO4 Battery supports series, parallel, and series-parallel connections. Up to four batteries can be connected in series to increase system voltage, up to four in parallel to increase capacity, or up to 16 in a 4S4P series-parallel configuration for a combined capacity of 20.48 kWh. Batteries of the same model and similar capacity are required for multi-battery configurations.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the IP67 rating mean for a battery used on the water?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAn IP67 rating means the Renogy 12V 100Ah Trolling Motor LiFePO4 Battery is fully sealed against dust ingress and rated to withstand temporary submersion. For marine installations where spray, rain, and bilge moisture are routine, this rating indicates the enclosure provides protection without requiring an additional waterproof housing around the battery.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat charger types are compatible with this LiFePO4 battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah Trolling Motor LiFePO4 Battery can be recharged via solar with a compatible MPPT or PWM solar charge controller, a DC-DC on-board battery charger, or an AC-DC charger. Any charger used must be rated compatible with lithium iron phosphate battery chemistry and set to the appropriate charge profile; chargers configured for AGM or flooded lead-acid profiles are not suitable.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the box with this battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 12V 100Ah Trolling Motor LiFePO4 Battery ships with the battery unit, two long terminal bolts, two insulating sleeves, and a user manual. A solar charge controller, DC-DC charger, inverter, and cables are not included and must be purchased separately.\u003c\/p\u003e\n","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50656999473222,"sku":"RBT12100LFP-TM-BT-G2-US","price":318.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1600-1600.jpg?v=1792209864"},{"product_id":"renogy-4-to-1-solar-branch-connectors-mmmmf-ffffm-pair","title":"Renogy 4-to-1 Solar Branch Connectors MMMMF+FFFFM Pair","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 4-to-1 Solar Branch Connectors are a matched pair of MC4-style branch connectors that wire four solar panels in parallel without extra tools or tangled cables. One connector combines four male inputs to one female output (MMMMF); the other combines four female inputs to one male output (FFFFM). The pair is primarily suited for 400W solar kits and supports panel installation in portrait or landscape orientation.\u003c\/p\u003e\n\n\u003ch2\u003eClean Parallel Wiring Without the Cable Chaos\u003c\/h2\u003e\n\u003cp\u003eRunning four panels in parallel typically means managing multiple short jumper cables that bunch up on a roof, truck bed, or trailer. These branch connectors consolidate four panel leads into a single trunk line at each polarity, so the wiring run to the charge controller stays tidy and the connections stay accessible. Fewer loose cables also means fewer points where a connection can work loose over rough terrain.\u003c\/p\u003e\n\n\u003ch2\u003eNo Tools Needed to Connect or Disconnect\u003c\/h2\u003e\n\u003cp\u003eThe hard plastic PC\/PA housing snaps together and releases by hand. Panels can be added, swapped, or removed without a disconnect tool, which matters when reconfiguring a system at a campsite or adjusting panel count between trips. The copper silver-plated contacts seat firmly and release cleanly without the corrosion that bare copper develops over time in outdoor environments.\u003c\/p\u003e\n\n\u003ch2\u003eWeatherproof Construction for Outdoor Installations\u003c\/h2\u003e\n\u003cp\u003eAn IP67 protection rating means the connectors are sealed against dust ingress and can withstand temporary submersion, making them suitable for roof-mounted, hood-mounted, or ground-deployed panel arrays exposed to rain, road spray, and washing. The operating temperature range of -40°F to +194°F covers cold-weather camping and high-desert summer heat without degrading the seal or the insulation.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMatched pair:\u003c\/strong\u003e includes one MMMMF (four male to one female) and one FFFFM (four female to one male) connector\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTool-free assembly:\u003c\/strong\u003e plugs connect and disconnect without any additional instrument\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 weatherproof:\u003c\/strong\u003e sealed against dust and temporary water immersion\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSilver-plated copper contacts:\u003c\/strong\u003e PC\/PA insulation housing with corrosion-resistant contact material\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e rated from -40°F to +194°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWithstanding Voltage\u003c\/td\u003e\n \u003ctd\u003e1000V DC (TUV), 600V (UL)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTest Voltage\u003c\/td\u003e\n \u003ctd\u003e6500V (50Hz, 5 min)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMain Wire Size\u003c\/td\u003e\n \u003ctd\u003e10AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBranch Wire Size\u003c\/td\u003e\n \u003ctd\u003e12AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOverall Length\u003c\/td\u003e\n \u003ctd\u003e3.5ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBranch Length\u003c\/td\u003e\n \u003ctd\u003e1.5ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd\u003ePC\/PA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Material\u003c\/td\u003e\n \u003ctd\u003eCopper, silver plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to +194°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity\u003c\/td\u003e\n \u003ctd\u003ePair (1 MMMMF + 1 FFFFM)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese connectors suit builders wiring four solar panels in parallel for a 400W solar kit, whether panels are mounted in portrait or landscape orientation on a roof rack, van roof, trailer, or ground array. The tool-free design and IP67 rating make them practical for mobile and outdoor installations where conditions change.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese connectors do not support series wiring configurations. The branch legs are fixed at 12AWG and the main trunk at 10AWG, so they are not suitable for systems requiring different wire gauges at those positions. They combine exactly four panels per connector and are not designed for two-panel or three-panel branch configurations.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat exactly comes in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 4-to-1 Solar Branch Connectors are sold as a pair: one MMMMF connector (four male inputs combining to one female output) and one FFFFM connector (four female inputs combining to one male output). Both connectors are needed together to complete the positive and negative parallel connections for a four-panel array.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauges do these branch connectors use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe main trunk wire on each Renogy 4-to-1 Solar Branch Connector is 10AWG, and each of the four branch legs is 12AWG. The overall connector length is 3.5ft, with each branch leg measuring 1.5ft.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these connectors rated for outdoor and wet-weather use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy 4-to-1 Solar Branch Connectors carry an IP67 protection rating, meaning they are sealed against dust and can withstand temporary water immersion. The operating temperature range of -40°F to +194°F covers most outdoor installation environments, from cold-weather camping to high-temperature summer rooftop use.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need a special tool to connect or disconnect the plugs?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo special tool is required. The Renogy 4-to-1 Solar Branch Connectors are designed for quick assembly and simple plug removal by hand, without any additional instrument. This makes reconfiguring or disconnecting panels straightforward in the field.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat solar system size are these connectors designed for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 4-to-1 Solar Branch Connectors are primarily suited for 400W solar kits wired in parallel. Each connector branches exactly four panels, so a matched pair handles the full positive and negative parallel connection for a four-panel array.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657000030278,"sku":"RNG-CNCT-MC4BC-G1-US","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/3edd4c80a08eaa5c12819b741f6239a3ebf15b6a5932ddaaad30533d9db2.jpg?v=1792210054"},{"product_id":"renogy-n-type-portable-solar-panel-blanket-200w-400w","title":"Renogy N-Type Portable Solar Panel Blanket 200W \/ 400W","description":"\u003cp class=\"product-lead\"\u003eThe Renogy N-Type Portable Solar Panel Blanket is a multi-fold, packable solar panel built for overlanders, van campers, and off-grid travelers who need high-efficiency charging capacity without the bulk or fragility of rigid panels. N-type cells deliver 25% efficiency and an IP65 rating handles dust and water spray. Two output levels are available: 200W and 400W.\u003c\/p\u003e\n\n\u003ch2\u003eN-Type Cells for Real-World Output\u003c\/h2\u003e\n\u003cp\u003eThe Renogy Solar Panel Blanket uses N-type solar cells rated at 25% efficiency, generating 3–7% more energy than PERC cells under the same conditions. That margin matters in diffuse light, at higher elevations, or on partly cloudy days, where more of the available light becomes usable power rather than heat loss. The rated 200W or 400W output is based on Standard Test Conditions (STC: 1000 W\/m² irradiance, 25°C, 1.5 air mass); real-world output will be lower depending on panel angle, temperature, shading, and wiring losses, which is normal for any solar panel.\u003c\/p\u003e\n\n\u003ch2\u003ePackable Size, Flexible Placement\u003c\/h2\u003e\n\u003cp\u003eThe Solar Panel Blanket folds down to backpack size and ships with a shoulder strap, so it travels as carry-on gear rather than strapped cargo. In the field it can lie flat on the ground, drape over a vehicle hood or roof, mount to the side of a truck camper or vehicle windshield, or hang from a rope, positioned wherever the angle to the sun is best. Renogy recommends keeping the blanket at 90° to direct, unshaded sunlight for maximum output. The IP65 rating means dust and low-pressure water spray won't damage the panel during use.\u003c\/p\u003e\n\n\u003ch2\u003ePartial-Unfold Power Levels and USB Output\u003c\/h2\u003e\n\u003cp\u003eThe 400W Solar Panel Blanket can operate at 300W, 200W, or 100W when only partially unfolded, so a tight campsite or a partially shaded vehicle doesn't force a choice between full deployment and no power at all. The 400W variant also supports series or parallel wiring when connecting multiple panels, making it practical to scale a system over time. The 200W Solar Panel Blanket includes built-in USB-C and USB-A output ports for charging phones, tablets, and other small devices directly, with no charge controller needed for USB loads.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN-type cells, 25% efficiency:\u003c\/strong\u003e generates 3–7% more energy than PERC under equivalent conditions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP65-rated:\u003c\/strong\u003e protected against dust ingress and low-pressure water spray from any direction.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFolds to backpack size:\u003c\/strong\u003e includes shoulder strap and carry handle for transport and field deployment.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMultiple mounting options:\u003c\/strong\u003e lay flat on the ground, drape over a vehicle, or hang from a rope or hook.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e200W: built-in USB-C and USB-A output ports\u003c\/strong\u003e charge small devices directly without additional hardware.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e400W: partial-unfold power levels\u003c\/strong\u003e of 300W, 200W, or 100W without full deployment; supports series and parallel multi-panel wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e200W\u003c\/th\u003e\n \u003cth\u003e400W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell type\u003c\/td\u003e\n \u003ctd\u003eN-type\u003c\/td\u003e\n \u003ctd\u003eN-type\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell efficiency\u003c\/td\u003e\n \u003ctd\u003e25%\u003c\/td\u003e\n \u003ctd\u003e25%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated power output\u003c\/td\u003e\n \u003ctd\u003e200W\u003c\/td\u003e\n \u003ctd\u003e400W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePartial-unfold power levels\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003ctd\u003e300W, 200W, 100W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBuilt-in USB output\u003c\/td\u003e\n \u003ctd\u003eUSB-C and USB-A\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIP rating\u003c\/td\u003e\n \u003ctd\u003eIP65\u003c\/td\u003e\n \u003ctd\u003eIP65\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e11.46 lb\u003c\/td\u003e\n \u003ctd\u003e16.09 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSeries\/parallel wiring\u003c\/td\u003e\n \u003ctd\u003e—\u003c\/td\u003e\n \u003ctd\u003eSupported\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible loads\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003ePortable power stations; 12V\/24V batteries (charge controller required for battery charging)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIncluded\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eSolar blanket x1, shoulder strap x1\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRPP200SB-SE-G1-US\u003c\/td\u003e\n \u003ctd\u003eRSP400SB-G3-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Panel Blanket suits overlanders, van campers, and off-grid travelers who need a packable, high-efficiency solar source for portable power stations or 12V\/24V battery banks. The 200W variant is well matched to solo or light-use setups that also need direct USB device charging; the 400W suits larger power demands, multi-panel arrays, and situations where only partial deployment is possible.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Solar Panel Blanket does not connect directly to a 12V\/24V battery without a separate solar charge controller, which is not included. Connecting to a non-Renogy power station requires a solar adapter cable, which is not confirmed as included in the box. This blanket is not designed for permanent fixed mounting and is not a rigid rooftop panel.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhy does the Solar Panel Blanket produce less than its rated wattage?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Panel Blanket's rated 200W or 400W output is measured under Standard Test Conditions (1000 W\/m² irradiance, 25°C, and 1.5 air mass). In the field, panel angle, ambient temperature, shading, wiring losses, and the efficiency of the connected device all reduce output below that rating. Positioning the blanket at a 90° angle to direct, unshaded sunlight gives the best real-world result.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Solar Panel Blanket require a charge controller to charge a battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA solar charge controller is required between the Renogy Solar Panel Blanket and any 12V or 24V battery; the blanket does not connect to a battery bank directly. For portable power stations, no charge controller is needed. Connect the blanket directly to the power station's solar input, and confirm the blanket's open-circuit voltage does not exceed the station's maximum DC input voltage.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Solar Panel Blanket work with power stations from other brands?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Panel Blanket is compatible with portable power stations from other brands. A solar adapter cable is required for non-Renogy power stations. Before connecting, confirm that the blanket's open-circuit voltage does not exceed the maximum DC input voltage of the power station being used.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan multiple Solar Panel Blankets be wired together?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 400W Solar Panel Blanket supports both series and parallel wiring configurations. Series wiring increases system voltage while keeping current the same; parallel wiring increases current while keeping voltage the same. In either configuration, the combined open-circuit voltage must not exceed the maximum DC input of the connected charge controller or power station.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the IP65 rating mean for outdoor use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Panel Blanket's IP65 rating means it is fully protected against dust ingress and resistant to low-pressure water spray from any direction. This makes the blanket suitable for use in rain, dusty terrain, and other typical outdoor conditions encountered during overlanding or camping, though it is not rated for submersion.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"400W","offer_id":50657000063046,"sku":"RSP400SB-G3-US","price":469.99,"currency_code":"USD","in_stock":true},{"title":"200W","offer_id":50657000095814,"sku":"RPP200SB-SE-G1-US","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RSP400SB-1.jpg?v=1792210065"},{"product_id":"renogy-copper-battery-interconnect-cable-for-5-16-in-lugs","title":"Renogy Copper Battery Interconnect Cable for 5\/16 in Lugs","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Copper Battery Interconnect Cable connects batteries in series or parallel configurations using 5\/16\" (M8) tin-plated copper ring terminals at both ends. Built from 100% copper with Class K 30 gauge bare copper stranding, it is rated for 600\/1000 V and handles temperatures up to 221°F dry and 167°F wet. Available in 12 in 4AWG, 16 in 4AWG, and 12 in 1AWG. Each cable is sold individually, not as a set.\u003c\/p\u003e\n\n\u003ch2\u003eTin-Plated Copper for Lasting Conductivity\u003c\/h2\u003e\n\u003cp\u003eThe Renogy Battery Interconnect Cable uses 100% copper conductors with a tin coating over Class K 30 gauge bare copper stranding. Tin plating improves heat dissipation and resists corrosion at the terminal contact points, a meaningful advantage in the moisture-prone environments common to overlanding rigs, RV battery compartments, and marine installations. A cable that maintains low resistance at the terminal connection keeps the batteries in a bank working equally together rather than one cell carrying a disproportionate load.\u003c\/p\u003e\n\n\u003ch2\u003eHeat-Shrink Insulation for Abrasion and Moisture Resistance\u003c\/h2\u003e\n\u003cp\u003eHeat-shrink tubing covers the terminal ends of each cable, providing a sealed barrier against water, humidity, and abrasion. The cable is rated UV resistant and waterproof, and meets TUV standards for PV solar applications. For off-grid systems mounted in truck beds, van builds, or outdoor enclosures where cables are exposed to vibration and weather, that physical protection at the lug end reduces the risk of insulation failure at the most vulnerable point in the connection.\u003c\/p\u003e\n\n\u003ch2\u003eEqual-Length Cables Keep Battery Banks Balanced\u003c\/h2\u003e\n\u003cp\u003eWhen wiring multiple batteries in series, parallel, or series-parallel, using cables of equal length between each battery ensures equal resistance across all connections. Unequal cable lengths create unequal resistance, which causes batteries in the bank to charge and discharge unevenly over time. Selecting the correct length for your specific battery layout and using matched cables throughout is the straightforward way to protect the long-term health of the battery bank.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e5\/16\" (M8) ring terminals:\u003c\/strong\u003e tin-plated copper lugs at both ends, compatible with standard battery post hardware\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e100% copper conductor:\u003c\/strong\u003e Class K 30 gauge bare copper stranding with tin coating for conductivity and corrosion resistance\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eVoltage rating:\u003c\/strong\u003e 600\/1000 V\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTemperature rating:\u003c\/strong\u003e 221°F dry, 167°F wet\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUV resistant and waterproof:\u003c\/strong\u003e meets TUV standards for PV solar applications\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHeat-shrink tubing:\u003c\/strong\u003e insulates terminal ends against abrasion, water, and humidity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e12 in 4AWG\u003c\/th\u003e\n \u003cth\u003e16 in 4AWG\u003c\/th\u003e\n \u003cth\u003e12 in 1AWG\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eLength\u003c\/td\u003e\n \u003ctd\u003e12 in\u003c\/td\u003e\n \u003ctd\u003e16 in\u003c\/td\u003e\n \u003ctd\u003e12 in\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Gauge\u003c\/td\u003e\n \u003ctd\u003e4AWG\u003c\/td\u003e\n \u003ctd\u003e4AWG\u003c\/td\u003e\n \u003ctd\u003e1AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConductor\u003c\/td\u003e\n \u003ctd\u003e100% copper, tin-coated\u003c\/td\u003e\n \u003ctd\u003e100% copper, tin-coated\u003c\/td\u003e\n \u003ctd\u003e100% copper, tin-coated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStranding\u003c\/td\u003e\n \u003ctd\u003eClass K 30 gauge bare copper\u003c\/td\u003e\n \u003ctd\u003eClass K 30 gauge bare copper\u003c\/td\u003e\n \u003ctd\u003eClass K 30 gauge bare copper\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal\u003c\/td\u003e\n \u003ctd\u003e5\/16 in battery rings, both ends\u003c\/td\u003e\n \u003ctd\u003e5\/16 in battery rings, both ends\u003c\/td\u003e\n \u003ctd\u003e5\/16 in battery rings, both ends\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Rating\u003c\/td\u003e\n \u003ctd\u003e600\/1000 V\u003c\/td\u003e\n \u003ctd\u003e600\/1000 V\u003c\/td\u003e\n \u003ctd\u003e600\/1000 V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Rating\u003c\/td\u003e\n \u003ctd\u003e221°F dry \/ 167°F wet\u003c\/td\u003e\n \u003ctd\u003e221°F dry \/ 167°F wet\u003c\/td\u003e\n \u003ctd\u003e221°F dry \/ 167°F wet\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSold as\u003c\/td\u003e\n \u003ctd\u003eSingle cable\u003c\/td\u003e\n \u003ctd\u003eSingle cable\u003c\/td\u003e\n \u003ctd\u003eSingle cable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.2 lb\u003c\/td\u003e\n \u003ctd\u003e0.22 lb\u003c\/td\u003e\n \u003ctd\u003e0.67 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Battery Interconnect Cable suits builders wiring battery banks in series or parallel for off-grid solar systems, overlanding rigs, RVs, marine installations, trucks, and cabins. The 5\/16\" ring terminals fit standard M8 battery post hardware, and the UV-resistant, waterproof construction holds up in exposed or outdoor enclosures.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eEach listing is a single cable, not a set. A parallel connection requires two cables. The cable terminates in 5\/16\" (M8) ring lugs at both ends; it does not fit battery posts requiring a different lug size. The 4AWG and 1AWG variants are not interchangeable for a given application; select the gauge appropriate for your system's current requirements.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is this cable used for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Battery Interconnect Cable is designed to link batteries together in series or parallel configurations within an off-grid power system. It uses 5\/16\" tin-plated copper ring terminals at both ends and is rated for 600\/1000 V, making it suitable for solar, RV, overlanding, marine, and cabin battery banks.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many cables do I need for a parallel connection?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA parallel connection between two batteries requires two cables: one connecting the negative terminal of the first battery to the negative terminal of the second, and one connecting the positive terminal of the first to the positive terminal of the second. Each Renogy Battery Interconnect Cable is sold individually, so two would need to be purchased for a parallel link.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDoes cable length matter when wiring a battery bank?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. When wiring batteries in series, parallel, or series-parallel, all interconnect cables between batteries should be the same length. Equal cable lengths produce equal resistance across all connections, ensuring every battery in the bank charges and discharges at the same rate. Mismatched lengths create unequal resistance and can cause uneven battery wear over time.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat lug size do these cables use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Battery Interconnect Cable uses 5\/16\" (M8) tin-plated copper ring terminals at both ends. These are a standard size for many battery posts, but the cable is not suitable for battery hardware requiring a different lug diameter.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the 4AWG and 1AWG variants?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 1AWG cable has a larger conductor cross-section than the 4AWG cable, which means it can carry higher current with lower resistance. Both share the same terminal type, voltage rating, and temperature rating. The appropriate gauge depends on the current requirements of the specific battery system being built; the 4AWG and 1AWG variants are not interchangeable for a given application.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"12In 4AWG","offer_id":50657001799750,"sku":"RNG-BATTERYCB-12IN-4-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"16In 4AWG","offer_id":50657001832518,"sku":"RNG-BATTERYCB-16IN-4-G1-US","price":14.99,"currency_code":"USD","in_stock":true},{"title":"12In 1AWG","offer_id":50657001865286,"sku":"RBCCB12IN1-G1-US","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__08169.1724858955.1280.1280.jpg?v=1792210186"},{"product_id":"renogy-n-type-lightweight-portable-solar-panel-suitcase","title":"Renogy N-Type Lightweight Portable Solar Panel Suitcase","description":"\u003cp class=\"product-lead\"\u003eThe Renogy N-Type Lightweight Portable Solar Panel Suitcase is a foldable, field-ready solar panel built for overlanders, van lifers, RV users, and campers who need reliable off-grid charging without a permanent roof mount. N-type cells deliver 24.80% cell efficiency, and an IP67 weather resistance rating protects the panel in demanding outdoor conditions. The suitcase is available in 100W and 300W configurations.\u003c\/p\u003e\n\n\u003ch2\u003eHigh Cell Efficiency in a Compact, Lightweight Frame\u003c\/h2\u003e\n\u003cp\u003eN-type solar cells achieve 24.80% cell efficiency, which means the Renogy N-Type Suitcase produces more power per unit of surface area than conventional polycrystalline or standard monocrystalline panels. For an overlander or camper working with limited space on a vehicle roof or campsite, that efficiency translates directly into a smaller, lighter panel that still meets meaningful charging demands. The 100W version weighs 8.86 lb and folds to 523 × 625 × 40 mm; the 300W version weighs 18.74 lb and folds to 588 × 745 × 80 mm. Both fold to dimensions that fit in a truck bed, cargo area, or trailer without consuming the space a rigid panel would.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt to Stay in the Field\u003c\/h2\u003e\n\u003cp\u003eThe Renogy N-Type Suitcase uses a fiberglass panel construction reinforced with an ETFE coating and corner protection at each edge. Fiberglass resists flex and impact better than aluminum-framed panels in transport, and ETFE adds a weather-resistant outer layer that holds up against UV exposure and light hail. The IP67 rating means the panel is dust-tight and can withstand water immersion up to one meter, a threshold that covers rain, stream crossings, and muddy campsites where a panel left out overnight faces real exposure. Robust kickstands hold the panel at a working angle on uneven ground without requiring a separate mounting fixture.\u003c\/p\u003e\n\n\u003ch2\u003eFlexible Deployment for Existing and New Systems\u003c\/h2\u003e\n\u003cp\u003eThe Renogy N-Type Suitcase connects directly to a compatible portable power station for plug-and-play charging, and two panels can be wired in parallel to increase current output for higher-demand scenarios. The panel also connects to a charge controller as part of a larger off-grid system. Both variants share a 600VDC maximum system voltage and a 15A maximum series fuse rating, which determines how they can be integrated into a series or parallel array. Users should confirm that their power station or charge controller's solar input voltage range is compatible with the panel's output before connecting.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eN-type cells, 24.80% cell efficiency:\u003c\/strong\u003e high output relative to panel size and weight across both variants\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 weather resistance:\u003c\/strong\u003e dust-tight and water-immersion rated for outdoor deployment\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFiberglass construction with ETFE coating:\u003c\/strong\u003e impact-resistant body with UV- and weather-resistant outer layer\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCorner protection:\u003c\/strong\u003e reinforced edges for durability in transport and field use\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRobust kickstands:\u003c\/strong\u003e hold the panel at a working angle on uneven terrain without a separate mount\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eParallel-connection capable:\u003c\/strong\u003e two panels can be wired in parallel to increase current output\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e100W\u003c\/th\u003e\n \u003cth\u003e300W\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eSKU\u003c\/td\u003e\n \u003ctd\u003eRSP100LSC-G1-US\u003c\/td\u003e\n \u003ctd\u003eRSP300LSC-G1-US\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Power at STC\u003c\/td\u003e\n \u003ctd\u003e100W\u003c\/td\u003e\n \u003ctd\u003e300W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e21.6V\u003c\/td\u003e\n \u003ctd\u003e30.03V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShort Circuit Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e5.83A\u003c\/td\u003e\n \u003ctd\u003e12.6A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Voltage (Vmp)\u003c\/td\u003e\n \u003ctd\u003e18.7V\u003c\/td\u003e\n \u003ctd\u003e25.2V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Current (Imp)\u003c\/td\u003e\n \u003ctd\u003e5.4A\u003c\/td\u003e\n \u003ctd\u003e11.9A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Efficiency\u003c\/td\u003e\n \u003ctd\u003e24.80%\u003c\/td\u003e\n \u003ctd\u003e24.80%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eModule Efficiency\u003c\/td\u003e\n \u003ctd\u003e15.2%\u003c\/td\u003e\n \u003ctd\u003e17.0%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum System Voltage\u003c\/td\u003e\n \u003ctd\u003e600VDC\u003c\/td\u003e\n \u003ctd\u003e600VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Series Fuse Rating\u003c\/td\u003e\n \u003ctd\u003e15A\u003c\/td\u003e\n \u003ctd\u003e15A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F~185°F \/ -40°C~85°C\u003c\/td\u003e\n \u003ctd\u003e-40°F~185°F \/ -40°C~85°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (unfolded)\u003c\/td\u003e\n \u003ctd\u003e1048 × 625 × 20 mm\u003c\/td\u003e\n \u003ctd\u003e2358 × 745 × 20 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (folded)\u003c\/td\u003e\n \u003ctd\u003e523 × 625 × 40 mm\u003c\/td\u003e\n \u003ctd\u003e588 × 745 × 80 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e4.02 kg \/ 8.86 lb\u003c\/td\u003e\n \u003ctd\u003e8.5 kg \/ 18.74 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeather Resistance\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConstruction\u003c\/td\u003e\n \u003ctd\u003eFiberglass with ETFE coating\u003c\/td\u003e\n \u003ctd\u003eFiberglass with ETFE coating\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCertifications\u003c\/td\u003e\n \u003ctd\u003eCE, ISO 9001, RoHS, CA65\u003c\/td\u003e\n \u003ctd\u003eCE, ISO 9001, RoHS, CA65\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWarranty\u003c\/td\u003e\n \u003ctd\u003e3-year materials and workmanship\u003c\/td\u003e\n \u003ctd\u003e3-year materials and workmanship\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy N-Type Suitcase suits overlanders, van lifers, RV users, and campers who need a portable, ground-deployable solar panel that can charge a portable power station or feed into a charge-controller-based off-grid system. The IP67 rating and fiberglass construction make it appropriate for extended outdoor exposure in rain, dust, and variable terrain.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Renogy N-Type Suitcase is not designed for permanent rooftop or on-grid installation. No charge controller, adapter cables, or portable power station is included; those components are sold separately. Before connecting this panel to any power station, users must confirm that the power station's solar DC input voltage range is compatible with the panel's output voltage.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Renogy N-Type Suitcase include a charge controller or cables?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy N-Type Suitcase ships as a solar panel only. No charge controller, adapter kit cables, or tray cables are included. A charge controller is required to regulate current into a battery bank, and adapter cables are needed to connect the panel to a controller or power station. These components are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eCan I connect two of these panels together for more power?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eTwo Renogy N-Type Suitcase panels can be wired in parallel to increase current output for higher-demand charging scenarios. When connecting panels in parallel, the system current output adds up while the voltage stays the same as a single panel. Users should verify that their charge controller or power station can handle the combined current before connecting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat does IP67 mean for a solar panel used outdoors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eAn IP67 rating means the Renogy N-Type Suitcase is fully dust-tight and rated to withstand water immersion up to one meter. In practical outdoor use, this covers rain exposure, splashing from stream crossings, and muddy or dusty environments common on overlanding trips and extended camping.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this panel work with my portable power station?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy N-Type Suitcase is compatible with most portable power stations, but users must verify that the power station's solar DC input voltage range matches the panel's output. The 100W variant has a Voc of 21.6V and Vmp of 18.7V; the 300W variant has a Voc of 30.03V and Vmp of 25.2V. Check the power station's specifications before connecting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the difference between the 100W and 300W versions?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eBoth versions of the Renogy N-Type Suitcase use the same N-type cells at 24.80% cell efficiency and share the same IP67 rating, fiberglass construction, and ETFE coating. The 300W panel produces three times the power output, is larger unfolded (2358 × 745 mm vs. 1048 × 625 mm), and weighs 18.74 lb compared to 8.86 lb for the 100W. The output voltages also differ, so users should check compatibility with their system before choosing a variant.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"300W","offer_id":50657001898054,"sku":"RSP300LSC-G1-US","price":386.99,"currency_code":"USD","in_stock":true},{"title":"100W","offer_id":50657001930822,"sku":"RSP100LSC-G1-US","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RSP300LSC_01__86050.1751960196.1280.1280.jpg?v=1792210195"},{"product_id":"renogy-e-flex-30w-portable-solar-panel","title":"Renogy E.Flex 30W Portable Solar Panel","description":"\u003cp class=\"product-lead\"\u003eThe Renogy E.Flex 30W Portable Solar Panel is a foldable, lightweight solar charger designed for camping, hiking, and other off-grid activities where keeping phones, tablets, and other low-power devices charged matters. Weighing 1.23 lbs and folding to 10.55 x 8.86 x 0.71 in, it fits in or attaches to a backpack and deploys in seconds. It charges two devices at once through a USB-C PD3.0 port (20W max) and a USB-A QC3.0 port (18W max), plus a DC output port for additional device types.\u003c\/p\u003e\n\n\u003ch2\u003eCompact Enough to Carry Every Day\u003c\/h2\u003e\n\u003cp\u003eAt 1.23 lbs and folded to roughly the footprint of a small laptop, the E.Flex 30W goes where rigid panels cannot. Four included carabiners clip directly to a pack, a tent line, or a branch, so the panel can harvest sun while you move through camp or rest on the trail. Six metal hanging holes give additional attachment options when carabiners are not the right tool. The result is a charging solution that does not require a dedicated bag or a flat surface to be useful.\u003c\/p\u003e\n\n\u003ch2\u003e23% Cell Efficiency in a Shade-Tolerant Design\u003c\/h2\u003e\n\u003cp\u003eThe E.Flex 30W achieves a cell efficiency of at least 22.4% and is rated for a maximum power output of 30W at standard test conditions. The panel uses a fully parallel cell design that reduces power-generation losses when part of the panel is shaded, which matters on a trail where tree cover is intermittent. Optimum operating voltage is 15.96V at 1.88A. The panel operates across a temperature range of 14°F to 149°F (-10°C to +65°C), covering most conditions from cold-morning starts to hot desert afternoons.\u003c\/p\u003e\n\n\u003ch2\u003eDual Fast-Charge Ports for Two Devices at Once\u003c\/h2\u003e\n\u003cp\u003eThe USB-C port supports PD3.0 at up to 20W, and the USB-A port supports QC3.0 at up to 18W, so a phone and a tablet, or two phones, can charge simultaneously without splitting a single slow port. A DC output port extends compatibility to device types that do not use USB. Charging speed depends on available sunlight; for best results, orient the panel toward direct outdoor sun rather than placing it near a window.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e30W rated output:\u003c\/strong\u003e max power at STC, cell efficiency ≥22.4%\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual fast-charge ports:\u003c\/strong\u003e USB-C PD3.0 (20W max) and USB-A QC3.0 (18W max), plus DC output\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFoldable and lightweight:\u003c\/strong\u003e 1.23 lbs, folds to 10.55 x 8.86 x 0.71 in\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFour carabiners included:\u003c\/strong\u003e clip to a backpack, tree, or tent line; six metal hanging holes\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eParallel cell design:\u003c\/strong\u003e reduces output loss under partial shade\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide operating temperature:\u003c\/strong\u003e 14°F to 149°F (-10°C to +65°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Power at STC\u003c\/td\u003e\n \u003ctd\u003e30W\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCell Efficiency\u003c\/td\u003e\n \u003ctd\u003e≥22.4%\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOpen Circuit Voltage (Voc)\u003c\/td\u003e\n \u003ctd\u003e19.04V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShort Circuit Current (Isc)\u003c\/td\u003e\n \u003ctd\u003e1.97A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Voltage (Vmp)\u003c\/td\u003e\n \u003ctd\u003e15.96V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOptimum Operating Current (Imp)\u003c\/td\u003e\n \u003ctd\u003e1.88A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e14°F to 149°F (-10°C to +65°C)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (folded)\u003c\/td\u003e\n \u003ctd\u003e10.55 x 8.86 x 0.71 in \/ 267.9 x 225 x 18 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions (unfolded)\u003c\/td\u003e\n \u003ctd\u003e36.34 x 10.55 x 0.08 in \/ 923 x 267.9 x 2 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e1.23 lbs \/ 0.56 kg\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Ports\u003c\/td\u003e\n \u003ctd\u003eUSB-C PD3.0 (20W max), USB-A QC3.0 (18W max), DC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIn the Box\u003c\/td\u003e\n \u003ctd\u003eSolar panel, USB-A to USB-C cable, 4 carabiners, user manual, warranty card\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe E.Flex 30W suits hikers, backpackers, and car campers who need to keep phones, tablets, and similarly sized low-power devices charged without carrying a heavy rigid panel. The carabiner attachment system makes it practical for anyone who wants to charge while moving or hanging the panel from camp gear rather than propping it on a flat surface.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe E.Flex 30W is designed for low-power consumer electronics and is not intended to charge a house battery bank or feed a solar charge controller. It does not include a charge controller, battery, or mounting hardware for a fixed vehicle or rooftop installation.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat devices can the E.Flex 30W charge?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy E.Flex 30W Portable Solar Panel is designed for low-power consumer electronics such as mobile phones and tablets. The USB-C PD3.0 port delivers up to 20W and the USB-A QC3.0 port delivers up to 18W, and a DC output port is also available for compatible devices.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow do I attach the panel to my backpack or camp setup?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe E.Flex 30W includes four carabiners and has six metal hanging holes, so it can clip directly to a backpack, a tent line, or a tree branch. No tools or additional hardware are required to hang or carry the panel during outdoor activities.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWill the panel work if part of it is in shade?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe E.Flex 30W uses a fully parallel cell design that reduces power-generation losses when part of the panel is shaded. Output will still decrease under partial shade, but the parallel layout limits how much a shaded section affects the rest of the panel compared to a series-wired design.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan the panel charge through a window?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe E.Flex 30W can produce some output through a window, but output will be low due to reduced sunlight intensity indoors. For best results, the panel should be used outdoors in direct sunlight.\u003c\/p\u003e\n","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657001996358,"sku":"RPP30EF-LN-G1-US","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/RPP30SE-LN-G1-_01__26756.1751363839.1280.1280.jpg?v=1792210240"},{"product_id":"renogy-solar-connector-to-sae-adapter-cable-12-awg","title":"Renogy Solar Connector to SAE Adapter Cable 12 AWG","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Connector to SAE Adapter Cable is a 12 AWG, PV-rated adapter cable just over 10.5 inches long that connects a solar connector input to an SAE output, allowing Renogy solar panels and suitcases to plug into SAE solar-ready RVs. One cable is included per order.\u003c\/p\u003e\n\n\u003ch2\u003eDirect Connection Between Solar Panels and SAE-Ready RVs\u003c\/h2\u003e\n\u003cp\u003eMany RVs include SAE solar-ready ports, while solar panels use solar connectors. This cable bridges that gap with a single, tool-free connection. The 12 AWG wire gauge handles the current load appropriate for solar panel wiring, and the PV-rated insulation is built for outdoor electrical use rather than repurposed from a lower-rated cable.\u003c\/p\u003e\n\n\u003ch2\u003eStraightforward Compatibility with Renogy Panels\u003c\/h2\u003e\n\u003cp\u003eThe adapter is compatible with all Renogy panels, including Renogy solar suitcases. For anyone already in the Renogy ecosystem, no additional adapters or pigtails are needed to connect a portable or mounted panel to an SAE-equipped RV port.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eWire gauge:\u003c\/strong\u003e 12 AWG, PV rated\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e just over 10.5 inches\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInput connector:\u003c\/strong\u003e Solar connector\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOutput connector:\u003c\/strong\u003e SAE\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInsulation material:\u003c\/strong\u003e PVC 55P black\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePanel compatibility:\u003c\/strong\u003e All Renogy panels, including suitcases\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Gauge\u003c\/td\u003e\n \u003ctd\u003e12 AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Rating\u003c\/td\u003e\n \u003ctd\u003ePV rated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCable Length\u003c\/td\u003e\n \u003ctd\u003eJust over 10.5 inches\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInput Connector\u003c\/td\u003e\n \u003ctd\u003eSolar connector\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOutput Connector\u003c\/td\u003e\n \u003ctd\u003eSAE\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd\u003ePVC 55P black\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity Included\u003c\/td\u003e\n \u003ctd\u003e1 cable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis adapter suits owners of SAE solar-ready RVs who want to connect a Renogy solar panel or Renogy solar suitcase to their vehicle's built-in SAE port without additional wiring work.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cable does not include multiple connectors or a second adapter for non-SAE output ports. It is not intended for systems that do not use an SAE solar-ready input on the RV side, and it is not a replacement for a full wiring harness or charge controller connection.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat connectors does this adapter cable use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector to SAE Adapter Cable has a solar connector on the input end and an SAE connector on the output end. This allows a solar panel with a solar connector to plug into an SAE solar-ready port on an RV.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauge is this cable, and why does it matter?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe adapter uses 12 AWG, PV-rated wire. PV-rated insulation is designed for photovoltaic outdoor electrical applications, making it appropriate for solar panel wiring rather than a general-purpose cable substituted into a solar circuit.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow long is the cable?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector to SAE Adapter Cable is just over 10.5 inches long. It is designed as a short adapter to bridge connector types at the panel or port, not as an extension cable to span distance between a panel and an RV.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich Renogy panels is this compatible with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis adapter is compatible with all Renogy panels, including Renogy solar suitcases. It is intended for use with SAE solar-ready RVs and connects the solar connector output of a Renogy panel to the RV's SAE input port.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many cables come in one order?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOne Renogy Solar Connector to SAE Adapter Cable is included per order.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657002029126,"sku":"RNG-CNCT-MC4-SAE-G1-US","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/6687e8aaa1aad706992cbdcd713f377210462d6202b3e13194cd01f4d0dc.jpg?v=1792210274"},{"product_id":"renogy-solar-panel-to-charge-controller-adaptor-kit","title":"Renogy Solar Panel to Charge Controller Adaptor Kit","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Panel to Charge Controller Adaptor Kit is a matched pair of solar wiring cables designed to connect a Renogy solar panel directly to a charge controller in off-grid installations, whether roof-mounted or ground-level. Each kit includes solar connectors on one end and exposed wire on the other, and is rated IP 65 with a voltage rating of 600\/1000V and an operating temperature range of -40°F to +185°F. Six variants are available, spanning lengths from 9 inches to 40 feet and conductor sizes of 10AWG or 12AWG.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Outdoor Conditions\u003c\/h2\u003e\n\u003cp\u003eThe Renogy Adaptor Kit uses weatherproof, insulated black cable with sunlight-resistant jacketing. An IP 65 protection rating means the cable and connectors resist dust ingress and direct water jets, which matters for roof-mounted panels exposed to rain, road spray, and UV over years of use. The tinned copper conductor resists corrosion at the strand level, maintaining conductivity in humid or coastal environments where bare copper would oxidize.\u003c\/p\u003e\n\n\u003ch2\u003eSecure, Tool-Free Connection at Both Ends\u003c\/h2\u003e\n\u003cp\u003eHard plastic solar connectors at the panel end use interlocking male and female contacts that lock together without tools, reducing the chance of an accidental disconnect during travel or in high-vibration installations. The exposed wire at the charge controller end feeds directly into the controller's terminal block, so no additional adaptor is needed on that side. The kit also extends and locks the built-in cables already attached to Renogy panels, giving more routing flexibility when the panel and controller are not mounted close together.\u003c\/p\u003e\n\n\u003ch2\u003eLength and Gauge Options for Different Layouts\u003c\/h2\u003e\n\u003cp\u003eChoosing the right length keeps voltage drop in check without leaving excess cable to manage. The 9-inch variant suits installations where the panel and controller mount within the same enclosure or very close together. The 10AWG conductor (6.0mm² cross-section, 84 strands) carries more current with lower resistance than the 12AWG (4.0mm², 56 strands), making 10AWG the better choice for longer runs or higher-current panels. Renogy states this kit is suited for off-grid systems ranging from 100W to 400W.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMatched pair:\u003c\/strong\u003e each kit includes one positive and one negative cable\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSolar connectors at panel end:\u003c\/strong\u003e interlocking male and female hard plastic connectors for a secure, tool-free connection\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eExposed wire at controller end:\u003c\/strong\u003e feeds directly into charge controller terminal block\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP 65 rated:\u003c\/strong\u003e weatherproof, insulated, sunlight-resistant black jacketing\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTinned copper conductor:\u003c\/strong\u003e corrosion-resistant stranded wire rated 600\/1000V\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide operating range:\u003c\/strong\u003e -40°F to +185°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e10AWG Variants\u003c\/th\u003e\n \u003cth\u003e12AWG Variants\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eAvailable Lengths\u003c\/td\u003e\n \u003ctd\u003e9 in, 10 ft, 20 ft, 30 ft, 40 ft\u003c\/td\u003e\n \u003ctd\u003e9 in, 10 ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConductor\u003c\/td\u003e\n \u003ctd\u003eTinned copper wire\u003c\/td\u003e\n \u003ctd\u003eTinned copper wire\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCross-Sectional Area\u003c\/td\u003e\n \u003ctd\u003e6.0 mm²\u003c\/td\u003e\n \u003ctd\u003e4.0 mm²\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eNumber of Strands\u003c\/td\u003e\n \u003ctd\u003e84\u003c\/td\u003e\n \u003ctd\u003e56\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConductor Diameter\u003c\/td\u003e\n \u003ctd\u003e3.02±0.08 mm\u003c\/td\u003e\n \u003ctd\u003e3.02±0.08 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMin. Insulation Wall Thickness\u003c\/td\u003e\n \u003ctd\u003e0.85 mm\u003c\/td\u003e\n \u003ctd\u003e0.78 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMin. Sheath Wall Thickness\u003c\/td\u003e\n \u003ctd\u003e1.08 mm\u003c\/td\u003e\n \u003ctd\u003e0.97 mm\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Rating\u003c\/td\u003e\n \u003ctd\u003e600\/1000V\u003c\/td\u003e\n \u003ctd\u003e600\/1000V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to +185°F\u003c\/td\u003e\n \u003ctd\u003e-40°F to +185°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eIP Rating\u003c\/td\u003e\n \u003ctd\u003eIP 65\u003c\/td\u003e\n \u003ctd\u003eIP 65\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity per Kit\u003c\/td\u003e\n \u003ctd\u003e1 pair (2 cables)\u003c\/td\u003e\n \u003ctd\u003e1 pair (2 cables)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Panel to Charge Controller Adaptor Kit suits builders wiring a Renogy solar panel to a charge controller in an off-grid system, whether in an overland rig, van, RV, cabin, or ground-mount installation. The range of lengths from 9 inches to 40 feet covers tight same-enclosure runs and longer roof-to-interior routes.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe adaptor kit does not include a charge controller, solar panel, or any other system component; each is sold separately. The 12AWG variants are available only in 9-inch and 10-foot lengths in the current lineup; longer 12AWG runs are not offered as a listed variant. This kit is designed for use with Renogy solar panels and may not be compatible with panels using different connector types.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eHow many cables come in one kit?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Renogy Solar Panel to Charge Controller Adaptor Kit includes one pair of cables (one positive and one negative), so a single kit is all that is needed to connect one solar panel to one charge controller input.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat connector type is on the solar panel end?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe solar panel end of the Renogy Adaptor Kit uses hard plastic solar connectors with interlocking male and female contacts. The charge controller end has exposed wire that connects directly to the controller's terminal block.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this cable rated for outdoor and rooftop use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Adaptor Kit carries an IP 65 protection rating and uses a black, sunlight-resistant jacket rated for operating temperatures from -40°F to +185°F, making it suitable for rooftop and ground-level outdoor installations exposed to weather and UV.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhich gauge should I choose, 10AWG or 12AWG?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe 10AWG variant has a larger 6.0mm² cross-section with 84 strands and lower resistance, which is better suited for longer cable runs or higher-current panels. The 12AWG variant has a 4.0mm² cross-section with 56 strands and is available in 9-inch and 10-foot lengths. Both gauges share the same voltage rating and IP 65 weatherproofing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat system sizes is this adaptor kit designed for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eRenogy states the Solar Panel to Charge Controller Adaptor Kit is suited for off-grid systems ranging from 100W to 400W. It is designed for use with Renogy solar panels and charge controllers.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"10FT \/ 12AWG","offer_id":50657002094662,"sku":"RNG-AK-10FT-12-G1-US","price":43.99,"currency_code":"USD","in_stock":true},{"title":"10FT \/ 10AWG","offer_id":50657002127430,"sku":"RNG-AK-10FT-10-G1-US","price":38.99,"currency_code":"USD","in_stock":true},{"title":"20FT \/ 10AWG","offer_id":50657002160198,"sku":"RNG-AK-20FT-10-G1-US","price":58.99,"currency_code":"USD","in_stock":true},{"title":"30FT \/ 10AWG","offer_id":50657002192966,"sku":"RNG-AK-30FT-10-G1-US","price":69.99,"currency_code":"USD","in_stock":true},{"title":"40FT \/ 10AWG","offer_id":50657002225734,"sku":"RNG-AK-40FT-10-G1-US","price":74.99,"currency_code":"USD","in_stock":true},{"title":"9IN \/ 12AWG","offer_id":50657002258502,"sku":"RNG-AK-9IN-12-G1-US","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/59546_source_1702886897.jpg?v=1792210320"},{"product_id":"renogy-battery-to-charge-controller-tray-cables-for-3-8-in-lugs","title":"Renogy Battery to Charge Controller Tray Cables for 3\/8 in Lugs","description":"\u003cp class=\"product-lead\"\u003eRenogy tray cables connect a solar charge controller to a battery bank in off-grid solar systems for overlanding rigs, RVs, marine vessels, cabins, and camp setups. Each cable is terminated with a 3\/8 in ring lug on one end for bolt-on connection to the battery terminal and left stripped on the other end for direct insertion into the charge controller's screw terminal. Two variants are available: 8 FT \/ 8AWG and 16 FT \/ 10AWG, each sold as a matched pair.\u003c\/p\u003e\n\n\u003ch2\u003eOxygen-Free Copper for Maximum Conductivity\u003c\/h2\u003e\n\u003cp\u003eRenogy tray cables are built from pure oxygen-free copper stranded wire with tin-plated copper ring terminals. Oxygen-free copper carries current with minimal resistance, which matters in a solar system where even small losses in the battery-to-controller run reduce the charge current reaching your battery bank. Tin plating on the terminals slows oxidation at the connection point, keeping resistance low over years of use in humid, salty, or dusty environments.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Outdoor and Mobile Installations\u003c\/h2\u003e\n\u003cp\u003eThe tray cables are UV-resistant and waterproof, and they meet TUV standards for PV solar applications. Heat-shrink tubing over the terminations provides abrasion resistance and electrical insulation, protecting the connection where the cable is most vulnerable to chafing against a rack, frame rail, or battery box edge. The cables are rated to perform in high-temperature conditions, which is relevant for engine-bay-adjacent or rooftop installations where ambient heat is a factor.\u003c\/p\u003e\n\n\u003ch2\u003eStraightforward Two-Step Connection\u003c\/h2\u003e\n\u003cp\u003eInstallation requires a wire crimper and a screwdriver. The ring lug end bolts directly to the battery terminal; the stripped end inserts into the charge controller's battery terminal block and is secured by tightening the terminal screw. No soldering is required. The stated cable length is the length of each individual cable in the pair, not the combined length of both. Confirm this before routing cables in a tight battery compartment.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eOxygen-free copper conductor:\u003c\/strong\u003e pure stranded copper wire for maximum conductivity\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eTin-plated ring terminals:\u003c\/strong\u003e 3\/8 in round center hole, corrosion-resistant\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHeat-shrink insulation:\u003c\/strong\u003e abrasion resistance and electrical safety at terminations\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUV-resistant and waterproof:\u003c\/strong\u003e TUV-listed for PV solar applications\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh-temperature rated:\u003c\/strong\u003e maintains performance in elevated ambient conditions\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e one positive and one negative cable per package\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e8 FT \/ 8AWG\u003c\/th\u003e\n \u003cth\u003e16 FT \/ 10AWG\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCable length (per cable)\u003c\/td\u003e\n \u003ctd\u003e8 ft\u003c\/td\u003e\n \u003ctd\u003e16 ft\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire gauge\u003c\/td\u003e\n \u003ctd\u003e8AWG\u003c\/td\u003e\n \u003ctd\u003e10AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eConductor material\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eOxygen-free copper, stranded\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal material\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eTin-plated copper\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eLug hole size\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003e3\/8 in round center hole\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eHeat-shrink tubing\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eUV resistance\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eYes\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWaterproof\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eYes\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eListing standard\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003eTUV (PV solar application)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity per package\u003c\/td\u003e\n \u003ctd colspan=\"2\"\u003e1 pair (2 cables)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShip weight\u003c\/td\u003e\n \u003ctd\u003e0.63 lb\u003c\/td\u003e\n \u003ctd\u003e0.86 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese cables suit anyone building or wiring a solar charging system that uses a Renogy charge controller with screw-terminal battery inputs and a battery bank with 3\/8 in ring-lug terminals. Typical applications include overlanding builds, RV solar setups, marine installations, cabin off-grid systems, and truck campers. The 8 FT \/ 8AWG variant is suited to higher-amperage charge controllers; the 16 FT \/ 10AWG variant works where a longer run is needed and the charge controller's terminal block accepts 10AWG wire.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese cables do not include a fuse or circuit breaker. A fuse between the charge controller and battery bank is a separate purchase. The ring terminals are sized for 3\/8 in lugs; battery terminals requiring a different lug size are not compatible. The 12AWG and 4AWG gauge options visible on Renogy's own site are not available in this listing.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does a tray cable do in a solar system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA tray cable carries current between the charge controller and the battery bank. The Renogy tray cable has a ring lug on one end that bolts to the battery terminal and a stripped wire end that inserts directly into the charge controller's battery terminal block, completing the charge path from the solar panels through the controller to the battery.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs the stated cable length the length of each cable or the combined length of both?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe stated length is the length of each individual cable in the pair. An 8 FT listing means each of the two cables in the package is 8 ft long, giving you 8 ft of reach from the charge controller to the battery terminal on both the positive and negative runs.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I choose between 8AWG and 10AWG?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eWire gauge should match the current the system will carry and the terminal size the charge controller accepts. A heavier gauge like 8AWG handles higher amperage with less voltage drop; a thinner gauge like 10AWG may be required if the charge controller's terminal block has a maximum wire size. Check the charge controller's manual for the accepted wire gauge range before selecting.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need a fuse between the charge controller and the battery?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eA fuse or circuit breaker between the charge controller and battery bank protects the wiring and connected devices if a short circuit occurs. The tray cable itself does not include a fuse. To size the fuse, match its amperage rating to the amperage rating of the charge controller. Fuses and circuit breakers are sold separately.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat tools are needed to install these cables?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eInstalling the Renogy tray cables requires a wire crimper and a screwdriver. The ring lug end bolts to the battery terminal; the stripped end is inserted into the charge controller's terminal block and secured by tightening the terminal screw. No soldering is required.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre the conductors copper or tin?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe tray cables use stranded oxygen-free copper wire as the conductor. The ring terminals are tin-plated copper. The tin plating on the terminals reduces oxidation at the connection point without affecting the copper conductor's conductivity.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"8 FT \/ 8AWG","offer_id":50657002422342,"sku":"RNG-TRAYCB-8FT-8-G2-US","price":29.99,"currency_code":"USD","in_stock":true},{"title":"16 FT \/ 10AWG","offer_id":50657002455110,"sku":"RNG-TRAYCB-16FT-10-G2-US","price":31.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/59555_source_1702886916.jpg?v=1792210378"},{"product_id":"renogy-solar-panel-cable-connectors-5-pairs-male-and-female","title":"Renogy Solar Panel Cable Connectors 5 Pairs Male and Female","description":"\u003cp class=\"product-lead\"\u003eRenogy Solar Panel Cable Connectors are a set of 5 male and 5 female connectors rated for 30A continuous current and up to 1000VDC, built for permanent photovoltaic installations in demanding mechanical and weather conditions. The silver-plated copper contacts and PA\/PC insulation housing carry an IP67 protection rating, making these connectors suitable for exposed outdoor wiring in solar arrays. Compatible with 10 AWG and 12 AWG solar cable.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Permanent PV Installations\u003c\/h2\u003e\n\u003cp\u003eSolar array wiring is not a set-it-and-forget-it task where any connector will do. A connector rated to 30A and 1000VDC handles the current and voltage demands of residential and off-grid solar strings without becoming a weak point in the system. The 1000VDC maximum voltage rating accommodates series-wired panel strings common in larger arrays, so the connectors do not limit system design options.\u003c\/p\u003e\n\n\u003ch2\u003eIP67 Protection Against Water and Dust\u003c\/h2\u003e\n\u003cp\u003eAn IP67 protection rating means the connectors are sealed against dust ingress and can withstand temporary water immersion, a meaningful spec for connectors mounted on a roof, a van, a trailer, or ground-mounted racking where rain, condensation, and debris are ongoing realities. The PA\/PC (polyamide\/polycarbonate) insulation housing resists UV and temperature extremes from -40°F to +194°F, covering cold-weather storage and hot rooftop surface conditions.\u003c\/p\u003e\n\n\u003ch2\u003eLow-Resistance Silver-Plated Copper Contacts\u003c\/h2\u003e\n\u003cp\u003eContact resistance below 0.5mΩ per the specification keeps resistive losses at the connection point minimal, which matters in a DC system where every milliohm of added resistance translates directly to heat and lost efficiency. Silver-plated copper contacts maintain conductivity over repeated connection cycles better than bare copper, which oxidizes at the surface over time.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 30A continuous\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum voltage:\u003c\/strong\u003e 1000VDC\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompatible wire gauges:\u003c\/strong\u003e 10 AWG and 12 AWG\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eContact material:\u003c\/strong\u003e silver-plated copper, contact resistance \u0026lt;0.5mΩ\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProtection rating:\u003c\/strong\u003e IP67 waterproof and dust-sealed\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -40°F to +194°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity\u003c\/td\u003e\n \u003ctd\u003e5 pairs (5 male, 5 female)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Voltage\u003c\/td\u003e\n \u003ctd\u003e1000VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible Wire Gauge\u003c\/td\u003e\n \u003ctd\u003e10 AWG, 12 AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Material\u003c\/td\u003e\n \u003ctd\u003eSilver-plated copper\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Resistance\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;0.5mΩ\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd\u003ePA\/PC (polyamide\/polycarbonate)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Rating\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to +194°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThese connectors suit builders wiring or expanding a photovoltaic solar array (rooftop, van, trailer, ground mount, or off-grid cabin) who need IP67-rated, 30A-rated connections for 10 AWG or 12 AWG solar cable in permanent outdoor installations. They are designed for parallel array applications.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese connectors are not suitable for wire gauges outside 10 AWG and 12 AWG, and are not intended for temporary or indoor-only wiring runs where weatherproofing is not a requirement. No compatibility is stated for any specific solar panel brand or charge controller brand beyond the standard PV connector form factor.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauges do these solar connectors accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Panel Cable Connectors are rated for 10 AWG and 12 AWG solar cable. These are the two most common gauges for residential and off-grid PV wiring runs. Wire gauges outside this range are not listed as compatible in the product specifications.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these connectors waterproof?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eYes. The Renogy Solar Panel Cable Connectors carry an IP67 protection rating, meaning they are sealed against dust and rated to withstand temporary water immersion. The PA\/PC housing and silver-plated copper contacts are designed for permanent outdoor installations exposed to rain, condensation, and temperature swings from -40°F to +194°F.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many connectors are included in this set?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis listing includes 5 pairs (5 male connectors and 5 female connectors), for a total of 10 individual connectors. The set is intended to complete or extend a photovoltaic solar panel array, typically in parallel wiring configurations.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the maximum voltage and current rating?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Panel Cable Connectors are rated for a maximum of 1000VDC and 30A continuous current. The contact resistance is specified at less than 0.5mΩ, which keeps resistive losses at the connection point low in DC solar systems.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657002553414,"sku":"RNG-CNCT-MC4x5-G1-US","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/11__10963__99463.1680196966.1280.1280.jpg?v=1792210451"},{"product_id":"renogy-72v-anl-fuse-with-corrosion-resistant-terminals","title":"Renogy 72V ANL Fuse with Corrosion-Resistant Terminals","description":"\u003cp class=\"product-lead\"\u003eThe Renogy ANL fuse protects batteries, wiring, and charge controllers from overcurrent damage in 12V, 24V, and 48V off-grid electrical systems. Built from alloy and brass copper with gold\/nickel plated terminal contacts, each fuse is voltage-rated to 72V. A clear non-conductive cover lets you confirm open status at a glance without removing the fuse from the holder. Four ratings are available: 20A, 30A, 40A, and 100A.\u003c\/p\u003e\n\n\u003ch2\u003eInstant Visual Status Check\u003c\/h2\u003e\n\u003cp\u003eThe ANL fuse element is visible through a clear protective non-conductive cover, so a blown fuse is identifiable without pulling the unit from the block. On an overlanding rig or van build where the fuse block may be tucked under a seat or inside a cabinet, confirming fuse status without disassembly saves real diagnostic time when something stops working on the road.\u003c\/p\u003e\n\n\u003ch2\u003eCorrosion-Resistant Contacts for Long-Term Reliability\u003c\/h2\u003e\n\u003cp\u003eGold\/nickel plated terminal contacts resist the oxidation that can develop on bare copper terminals in humid, dusty, or marine environments. Corroded fuse contacts increase resistance at the connection point, which can cause voltage drops or heat buildup even when the fuse element itself is intact. The plated contacts help maintain a clean, low-resistance connection over the life of the installation.\u003c\/p\u003e\n\n\u003ch2\u003eIgnition-Protected and RoHS-Compliant Construction\u003c\/h2\u003e\n\u003cp\u003eThe ANL fuse carries ignition-protected status, meaning its construction is designed to prevent it from becoming an ignition source for flammable vapors. This matters in enclosed spaces such as van cargo areas, trailer battery compartments, and cabin battery banks where gases from batteries can accumulate. RoHS compliance confirms the fuse is manufactured without the restricted hazardous substances covered by that standard.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eClear status window:\u003c\/strong\u003e visible fuse element through non-conductive cover for quick open-status identification\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGold\/nickel plated terminals:\u003c\/strong\u003e corrosion-resistant contact surfaces for reliable long-term connections\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIgnition protected:\u003c\/strong\u003e construction designed to prevent ignition of flammable vapors\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e72V voltage rating:\u003c\/strong\u003e covers 12V, 24V, and 48V nominal battery systems across all four amp variants\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRoHS compliant:\u003c\/strong\u003e manufactured without restricted hazardous substances\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRenogy ANL Fuse Block compatible:\u003c\/strong\u003e designed for use with the Renogy ANL Fuse Block\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003e20A\u003c\/th\u003e\n \u003cth\u003e30A\u003c\/th\u003e\n \u003cth\u003e40A\u003c\/th\u003e\n \u003cth\u003e100A\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eCurrent Rating\u003c\/td\u003e\n \u003ctd\u003e20A\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003ctd\u003e40A\u003c\/td\u003e\n \u003ctd\u003e100A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eVoltage Rating\u003c\/td\u003e\n \u003ctd\u003e72V\u003c\/td\u003e\n \u003ctd\u003e72V\u003c\/td\u003e\n \u003ctd\u003e72V\u003c\/td\u003e\n \u003ctd\u003e72V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInterrupt Capacity\u003c\/td\u003e\n \u003ctd\u003e180A (48V)\u003c\/td\u003e\n \u003ctd\u003e200A (48V)\u003c\/td\u003e\n \u003ctd\u003e240A (48V)\u003c\/td\u003e\n \u003ctd\u003e500A (48V)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBody Material\u003c\/td\u003e\n \u003ctd colspan=\"4\"\u003eAlloy and brass copper\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTerminal Contacts\u003c\/td\u003e\n \u003ctd colspan=\"4\"\u003eGold\/nickel plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCover\u003c\/td\u003e\n \u003ctd colspan=\"4\"\u003eClear protective non-conductive\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompliance\u003c\/td\u003e\n \u003ctd colspan=\"4\"\u003eRoHS compliant; ignition protected\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy ANL fuse suits builders of 12V, 24V, and 48V off-grid electrical systems (overlanding rigs, van conversions, travel trailers, and cabin battery banks) who need a rated overcurrent protection device on battery cables, charge controller outputs, or inverter feeds. The 20A and 30A ratings suit lighter circuits; the 40A and 100A ratings suit higher-current battery interconnects and inverter feeds.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe ANL fuse is designed for use with the Renogy ANL Fuse Block, which is sold separately and not included. Compatibility with fuse blocks from other manufacturers is not stated.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhich amp rating should I choose for my system?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe correct ANL fuse rating depends on the wire gauge and the maximum continuous current of the circuit being protected, such as a charge controller output, battery interconnect, or inverter feed. No wire-gauge recommendation per rating is specified; consult your system's wiring diagram or a qualified installer to match the fuse rating to your cable size and load.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat voltage systems is this fuse compatible with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach Renogy ANL fuse variant carries a 72V voltage rating, which covers 12V, 24V, and 48V nominal battery systems. The interrupt capacity figures are specified at 48V: 180A for the 20A fuse, 200A for the 30A, 240A for the 40A, and 500A for the 100A variant.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow do I know if the fuse has blown?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL fuse element is visible through a clear non-conductive protective cover, allowing visual confirmation of open status without removing the fuse from the holder. A broken or discolored fuse element visible through the window indicates the fuse has opened and needs replacement.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat fuse block does this fuse work with?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL fuse is designed for use with the Renogy ANL Fuse Block, which is sold separately. Compatibility with fuse blocks from other manufacturers is not stated, and a fuse block is not included with this listing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the fuse made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy ANL fuse body is constructed from alloy and brass copper, with gold\/nickel plated terminal contacts for corrosion resistance. A clear protective non-conductive cover is included with each fuse.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"20A","offer_id":50657002586182,"sku":"RNG-ANL-FUSE20-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"30A","offer_id":50657002618950,"sku":"RNG-ANL-FUSE30-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"40A","offer_id":50657002651718,"sku":"RNG-ANL-FUSE40-G1-US","price":12.99,"currency_code":"USD","in_stock":true},{"title":"100A","offer_id":50657002684486,"sku":"RNG-ANL-FUSE100-G1-US","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1ab899b7a1b45752e6e83a69e61f129ed294cae77d83d05e484fb191cc23.jpg?v=1792210480"},{"product_id":"renogy-solar-y-branch-connectors-mmf-ffm-pair","title":"Renogy Solar Y Branch Connectors MMF+FFM Pair","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Y Branch Connectors MMF+FFM Pair are wiring connectors sold as a matched set (one male MMF and one female FFM) for connecting solar panels in parallel. Parallel wiring with these connectors keeps the array voltage consistent with the battery bank while combining panel output. The pair is rated for 50A continuous current and carries an IP67 protection rating when mated.\u003c\/p\u003e\n\n\u003ch2\u003eParallel Wiring Without Voltage Mismatch\u003c\/h2\u003e\n\u003cp\u003eWhen solar panels are wired in parallel, each additional panel adds current without raising the array voltage. The Renogy Solar Y Branch Connectors are designed specifically for this configuration: the Y-branch geometry lets two panel leads combine into a single run to the charge controller, keeping the voltage at the level the battery bank expects. Getting this right matters because a voltage mismatch between the array and the battery can reduce charging efficiency or stress the charge controller.\u003c\/p\u003e\n\n\u003ch2\u003eIP67 Weatherproof Construction\u003c\/h2\u003e\n\u003cp\u003eThe Solar Y Branch Connectors carry an IP67 protection rating when mated, meaning the connection is sealed against dust ingress and temporary water immersion. The insulation is PC\/PA hard plastic with a UL94-V0 or UL94-5VA flame class rating, and the contacts are copper with silver plating. The operating temperature range of -40°F to +194°F covers the conditions a roof-mounted or ground-deployed solar array will see across seasons and climates.\u003c\/p\u003e\n\n\u003ch2\u003eSecure, High-Current Connection\u003c\/h2\u003e\n\u003cp\u003eThe connectors are rated for 50A continuous current and withstand up to 1000V DC (TUV) \/ 600V (UL). At an unmating force of 147.51 Ft·lb, the connection resists accidental disconnection from vibration or cable movement, which matters for panels mounted on a vehicle or trailer. The silver-plated copper contacts keep contact resistance low for efficient current transfer.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e one MMF (male) and one FFM (female) Y-branch connector included\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e50A rated current:\u003c\/strong\u003e supports high-output parallel solar panel configurations\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 protection (mated):\u003c\/strong\u003e sealed against dust and temporary water immersion\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePC\/PA hard plastic insulation:\u003c\/strong\u003e UL94-V0 or UL94-5VA flame class rating\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSilver-plated copper contacts:\u003c\/strong\u003e low contact resistance for efficient current transfer\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e rated -40°F to +194°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e50A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWithstanding Voltage\u003c\/td\u003e\n \u003ctd\u003e1000V DC (TUV), 600V (UL)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Resistance\u003c\/td\u003e\n \u003ctd\u003e1m\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Degree\u003c\/td\u003e\n \u003ctd\u003eIP67, mated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eProtection Class\u003c\/td\u003e\n \u003ctd\u003eClass II\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eOperating Temperature\u003c\/td\u003e\n \u003ctd\u003e-40°F to +194°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eUnmating Force\u003c\/td\u003e\n \u003ctd\u003e147.51 Ft·lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsulation Material\u003c\/td\u003e\n \u003ctd\u003ePC\/PA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Material\u003c\/td\u003e\n \u003ctd\u003eCopper, silver plated\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFlame Class\u003c\/td\u003e\n \u003ctd\u003eUL94-V0 or UL94-5VA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContents\u003c\/td\u003e\n \u003ctd\u003e1 x MMF connector, 1 x FFM connector\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.32 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Y Branch Connectors suit overlanders, van builders, RV owners, and cabin or off-grid system builders who are wiring two solar panels in parallel into a single cable run and need a weatherproof, high-current branch connection rated for outdoor use.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese connectors are compatible with Solar (MC4-style) connectors only and are not intended for series wiring configurations or for connector types other than Solar connectors. No cable, crimping tool, or additional hardware is included in the pair.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the MMF+FFM designation mean?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Y Branch Connectors come as two pieces: one MMF connector (male-male-female, branching two male inputs to one female output) and one FFM connector (female-female-male, branching two female inputs to one male output). Together the pair handles both the positive and negative legs of a parallel solar panel connection.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eAre these connectors waterproof?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Y Branch Connectors carry an IP67 protection rating when mated, meaning the joined connection is sealed against dust and against temporary water immersion. The rating applies to the mated state; unmated connectors are not rated IP67.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat current and voltage are these connectors rated for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Y Branch Connectors are rated for 50A continuous current and a withstanding voltage of 1000V DC (TUV) or 600V (UL), making them suitable for most residential-scale and off-grid parallel solar panel arrays.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauge do these connectors accept?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Y Branch Connectors do not include a compatible wire gauge specification in the available product data. Confirm wire gauge compatibility with Renogy before purchasing if your system uses an unusual cable size.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe package contains one pair of Renogy Solar Y Branch Connectors: one MMF connector and one FFM connector. No cable, crimping tool, or mounting hardware is included.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657002979398,"sku":"RNG-CNCT-MC4Y-G2-US","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MC4-Y.jpg?v=1792210547"},{"product_id":"renogy-solar-connector-assembly-tool-for-custom-wiring","title":"Renogy Solar Connector Assembly Tool for Custom Wiring","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Connector Assembly Tool is a hard plastic hand tool designed to simplify the assembly and disassembly of custom solar connector wires. Weighing 0.3 ounces and measuring 5.5 × 2 × 1 inches, it suits both first-time builders and experienced installers working on off-grid solar wiring projects.\u003c\/p\u003e\n\n\u003ch2\u003eFaster Connector Work, Fewer Fumbles\u003c\/h2\u003e\n\u003cp\u003eThe Renogy Solar Connector Assembly Tool's double quick screw-down mechanism lets users tighten connector hardware without improvising with other tools. For anyone building or servicing a custom solar wiring harness, having a dedicated assembly tool reduces the risk of cross-threading or under-tightening connectors, both of which can compromise a connection in a mobile or remote installation where rework is inconvenient.\u003c\/p\u003e\n\n\u003ch2\u003eCompact and Lightweight for Field Use\u003c\/h2\u003e\n\u003cp\u003eAt 0.3 ounces and sized to fit in a tool pouch or glove box, the Renogy Solar Connector Assembly Tool adds negligible weight to a kit. Installers working in tight spaces (a van cargo area, a truck bed, or a trailer electrical bay) can reach awkward connector positions without a bulky tool getting in the way.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eHard plastic construction:\u003c\/strong\u003e durable material suited to connector assembly tasks.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDouble quick screw-down:\u003c\/strong\u003e speeds tightening and loosening of connector hardware.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eCompact form factor:\u003c\/strong\u003e 5.5 × 2 × 1 inches, 0.3 ounces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaterial\u003c\/td\u003e\n \u003ctd\u003eHard Plastic\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e5.5 × 2 × 1 inches\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.3 ounces\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Contents\u003c\/td\u003e\n \u003ctd\u003e1× Solar Connector Assembly Tool\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy Solar Connector Assembly Tool suits installers building or servicing custom solar connector wiring on overlanding rigs, vans, trailers, and off-grid cabins: anyone who regularly assembles or disassembles solar connectors by hand.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis tool is not compatible with the solar connectors used in Renogy Solar Suitcase products. It is not a crimping tool and does not include any connector hardware.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the Renogy Solar Connector Assembly Tool actually do?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector Assembly Tool is designed to tighten and take apart solar connector wires during custom wiring builds or repairs. Its double quick screw-down mechanism makes it easier to seat and release connector hardware without improvising with other tools.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the tool made of?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector Assembly Tool is made of hard plastic. It measures 5.5 × 2 × 1 inches and weighs 0.3 ounces, making it light enough to keep in a tool pouch or glove box.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWill this tool work with Renogy Solar Suitcase connectors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo. The Renogy Solar Connector Assembly Tool is not compatible with the solar connectors found in Renogy Solar Suitcase products. It is intended for use with custom solar connector wiring only.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eEach package includes one Renogy Solar Connector Assembly Tool. No connector hardware, crimping tools, or additional accessories are included.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657003012166,"sku":"RNG-TOOL-MC4-G1-US","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/0E7884B6-8696-406c-9BE2-3C0B938EC786__54732.1596521215.1280..jpg?v=1792210573"},{"product_id":"renogy-3-to-1-solar-branch-connectors-mmmf-fffm-pair","title":"Renogy 3 to 1 Solar Branch Connectors MMMF+FFFM Pair","description":"\u003cp class=\"product-lead\"\u003eThe Renogy 3 to 1 Solar Branch Connectors in MMMF+FFFM configuration connect three solar panels in parallel using a single pair of branch connectors. Rated for 50A continuous current and a maximum working voltage of DC1000V, these connectors suit overlanding rigs, van builds, trailers, and off-grid cabin arrays where three panels feed a single charge controller input. The pair ships as one MMMF connector and one FFFM connector.\u003c\/p\u003e\n\n\u003ch2\u003eBuilt for Outdoor Exposure\u003c\/h2\u003e\n\u003cp\u003eAn IP67 shell protection rating means the Renogy 3 to 1 Solar Branch Connectors resist dust ingress and temporary water immersion, keeping the connection sealed when panels are mounted on a roof rack through rain, dust, and trail debris. High aging resistance and UV endurance extend service life in direct sun without the housing becoming brittle or the seal degrading. The -40°C to +85°C ambient temperature range covers cold-weather camping and desert heat without derating.\u003c\/p\u003e\n\n\u003ch2\u003eNo-Tool Connection and Disconnection\u003c\/h2\u003e\n\u003cp\u003eA rivet-and-lock cable retention system secures the wire inside each connector body without crimping tools or additional hardware at assembly time. The same mechanism releases cleanly for disassembly, so panels can be reconfigured or swapped in the field without carrying a dedicated connector tool. Insertion force is rated at ≤50N and withdrawal force at ≥50N, meaning the connector seats with moderate hand pressure and holds firmly against vibration and cable tension once locked.\u003c\/p\u003e\n\n\u003ch2\u003eElectrical Safety Construction\u003c\/h2\u003e\n\u003cp\u003eThe connector body carries a UL94-V0 flame class rating, indicating the housing material self-extinguishes rather than propagating a flame (relevant in enclosed van or trailer wiring runs where a fault could otherwise spread). Contact resistance is rated at ≤5mΩ, keeping resistive losses at the junction low across the 50A rated current. Safety Level Class II construction means the connector relies on reinforced insulation rather than a ground connection for shock protection.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRated current:\u003c\/strong\u003e 50A continuous\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMaximum working voltage:\u003c\/strong\u003e DC1000V\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP67 shell protection:\u003c\/strong\u003e dust-tight and water-immersion resistant\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFlame class UL94-V0:\u003c\/strong\u003e self-extinguishing housing material\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNo-tool assembly and disassembly:\u003c\/strong\u003e rivet-and-lock cable retention\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -40°C to +85°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Current\u003c\/td\u003e\n \u003ctd\u003e50A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMaximum Working Voltage\u003c\/td\u003e\n \u003ctd\u003eDC1000V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eInsertion Force\u003c\/td\u003e\n \u003ctd\u003e≤50N\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWithdrawal Force\u003c\/td\u003e\n \u003ctd\u003e≥50N\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eContact Resistance\u003c\/td\u003e\n \u003ctd\u003e≤5mΩ\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eShell Protection\u003c\/td\u003e\n \u003ctd\u003eIP67\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eFlame Class\u003c\/td\u003e\n \u003ctd\u003eUL94-V0\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePollution Degree\u003c\/td\u003e\n \u003ctd\u003e2\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSafety Level\u003c\/td\u003e\n \u003ctd\u003eClass II\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eAmbient Temperature Range\u003c\/td\u003e\n \u003ctd\u003e-40°C to +85°C\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Contents\u003c\/td\u003e\n \u003ctd\u003e1 pair (1 × MMMF connector, 1 × FFFM connector)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.32 lb\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Renogy 3 to 1 Solar Branch Connectors suit builders wiring exactly three solar panels in parallel into a single charge controller input, common in overlanding roof-rack arrays, van solar builds, trailer systems, and off-grid cabin installations where panel count is three per string.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThese connectors are designed specifically for a three-panel parallel branch and are not a two-panel Y-connector or a four-or-more panel branch solution.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does the MMMF+FFFM configuration mean?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 3 to 1 Solar Branch Connectors ship as a matched pair: one MMMF connector (two male inputs and one female output) and one FFFM connector (two female inputs and one male output). Together, the pair allows three panels to be wired in parallel: two panels connect to the branch inputs on each connector, and the single output side runs to the charge controller.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat current and voltage are these connectors rated for?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 3 to 1 Solar Branch Connectors are rated for 50A continuous current and a maximum working voltage of DC1000V. These ratings apply to the connector junction itself; the overall system current and voltage limits are determined by the panels, charge controller, and wiring in the installation.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eAre these connectors weatherproof for outdoor roof-mount use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy 3 to 1 Solar Branch Connectors carry an IP67 shell protection rating, meaning the housing is dust-tight and resistant to temporary water immersion. The housing material also has high aging resistance and UV endurance, making the connectors suitable for permanent outdoor exposure on roof racks and panel mounts across a -40°C to +85°C ambient temperature range.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eDo I need a special tool to assemble or disconnect these connectors?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eNo dedicated tool is required. The Renogy 3 to 1 Solar Branch Connectors use a rivet-and-lock mechanism to secure the cable inside the connector body, and the same mechanism releases for disassembly without additional tools. This makes field reconfiguration or panel swaps straightforward without carrying a connector crimping or extraction tool.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat is included in the package?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe package contains one pair of Renogy 3 to 1 Solar Branch Connectors: one MMMF connector and one FFFM connector. No additional cables, panels, or mounting hardware are included.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657003044934,"sku":"RNG-CNCT-MC4Y-M-G1-US","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/MC4-M.jpg?v=1792210606"},{"product_id":"renogy-solar-connector-to-alligator-clips-14-awg-cable","title":"Renogy Solar Connector to Alligator Clips 14 AWG Cable","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Solar Connector to Alligator Clips 14 AWG Cable connects a solar charge controller to a battery using alligator clips, making it a straightforward option for temporary or mobile off-grid setups where permanent battery wiring is not needed.\u003c\/p\u003e\n\n\u003ch2\u003eQuick Connection Without Permanent Wiring\u003c\/h2\u003e\n\u003cp\u003eFor overlanders, van builds, and portable power setups that change configuration between trips, running permanent cable terminations to a battery is not always practical. The Renogy Solar Connector to Alligator Clips 14 AWG Cable lets you attach and detach a charge controller quickly, so the system can be broken down, moved, or reconfigured without cutting or re-terminating wire. That flexibility matters when the vehicle or trailer serves multiple purposes and the electrical setup needs to adapt.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e14 AWG wire:\u003c\/strong\u003e the gauge this cable is built with.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eAlligator clip termination:\u003c\/strong\u003e clips directly to battery terminals without permanent hardware.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSolar connector end:\u003c\/strong\u003e mates with the solar connector port on a compatible charge controller.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMobile-system design:\u003c\/strong\u003e intended for temporary or on-the-go charge controller connections rather than fixed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eWire Gauge\u003c\/td\u003e\n \u003ctd\u003e14 AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eController End Termination\u003c\/td\u003e\n \u003ctd\u003eSolar connector\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery End Termination\u003c\/td\u003e\n \u003ctd\u003eAlligator clips\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eQuantity Included\u003c\/td\u003e\n \u003ctd\u003e1 cable\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThis cable suits overlanders, campers, and off-grid users who want to connect a solar charge controller to a battery quickly and temporarily, without committing to a permanent terminal connection. It is a practical choice for mobile systems that are assembled and disassembled between uses.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThis cable is not designed as a permanent, fixed-installation wiring solution. Cable length, current rating, and connector-type compatibility with specific charge controller models are not stated in the available product data; confirm compatibility with your charge controller before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat does this cable connect?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector to Alligator Clips 14 AWG Cable connects the solar connector port on a charge controller to a battery using alligator clips on the battery end, allowing a temporary electrical connection without permanent wiring.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauge does this cable use?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThis cable is built with 14 AWG wire. No current or amperage rating is stated in the available product data; consult your charge controller's documentation to confirm this gauge is appropriate for your system.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eHow many cables are included?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eOne Renogy Solar Connector to Alligator Clips 14 AWG Cable is included per listing.\u003c\/p\u003e\n\n\u003ch3 class=\"product-faq-q\"\u003eIs this cable suitable for a permanent installation?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Renogy Solar Connector to Alligator Clips 14 AWG Cable is designed for mobile and temporary setups where a charge controller does not need to be permanently secured to a battery. It is not described as a permanent installation cable.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657003077702,"sku":"RNG-TRAYCB-ALGTR-G1-US","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/1__14504.1705459899.1280.1280.jpg?v=1792210615"},{"product_id":"renogy-wanderer-li-30a-pwm-solar-charge-controller","title":"Renogy Wanderer Li 30A PWM Solar Charge Controller","description":"\u003cp class=\"product-lead\"\u003eThe Renogy Wanderer Li 30A PWM Charge Controller is a 12V negative-ground solar charge controller rated for 30A of charge current and a maximum PV input of 25 VDC, designed for small off-grid systems in trailers, RVs, cabins, and boats. It supports Gel, Sealed, Flooded, and Lithium battery types, and ships as a single controller unit.\u003c\/p\u003e\n\n\u003ch2\u003e4-Stage PWM Charging Protects Battery Health\u003c\/h2\u003e\n\u003cp\u003eThe Wanderer Li uses 4-stage PWM (Pulse-Width Modulation) charging, which continuously monitors battery voltage and adjusts pulse width to match the battery's actual state of charge. This approach avoids the overcharging that shortens battery life in simpler on\/off controllers, and the boost stage runs for up to 120 minutes to ensure a thorough charge cycle before the controller steps down to float. For lithium batteries in particular, precise voltage management at each stage reduces cell stress and supports longer cycle life.\u003c\/p\u003e\n\n\u003ch2\u003eEight Built-In Electronic Protections\u003c\/h2\u003e\n\u003cp\u003eThe Wanderer Li includes eight built-in electronic protections: overcharging, over-discharging, short-circuit, overload, reverse polarity, reverse current, and temperature compensation are among those covered. For a system installed in a trailer or van where wiring mistakes are easy to make and hard to catch, reverse-polarity and reverse-current protection mean a miswired connection won't destroy the controller or the battery. The aluminum housing adds physical durability in environments where the controller may be exposed to vibration or temperature swings.\u003c\/p\u003e\n\n\u003ch2\u003eDynamic Temperature Compensation and Low Self-Consumption\u003c\/h2\u003e\n\u003cp\u003eThe Wanderer Li applies dynamic temperature compensation at -3mV\/°C\/2V, adjusting charge voltage as ambient temperature changes so the battery receives the correct voltage whether the system is sitting in a cold-morning desert or a hot afternoon. Self-consumption stays below 10mA, which matters in small systems where a parasitic draw of even a few hundred milliamps can meaningfully reduce overnight battery capacity. The controller operates across a working temperature range of -20°F to 113°F.\u003c\/p\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e30A rated charge current:\u003c\/strong\u003e supports 12V systems up to 25 VDC PV input\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eMulti-battery compatibility:\u003c\/strong\u003e Gel, Sealed, Flooded, and Lithium battery types\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFive load control modes:\u003c\/strong\u003e configurable to match varied power-management needs\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLCD display:\u003c\/strong\u003e shows real-time charging parameters and error codes\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRS232 port:\u003c\/strong\u003e enables real-time monitoring; compatible with Renogy BT-1 Bluetooth module (sold separately)\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIP20 enclosure, aluminum housing:\u003c\/strong\u003e lightweight at 0.65 lbs with eight built-in electronic protections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003cthead\u003e\n \u003ctr\u003e\n \u003cth\u003eSpecification\u003c\/th\u003e\n \u003cth\u003eValue\u003c\/th\u003e\n \u003c\/tr\u003e\n \u003c\/thead\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n \u003ctd\u003eNominal Voltage\u003c\/td\u003e\n \u003ctd\u003e12 VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eRated Charge Current\u003c\/td\u003e\n \u003ctd\u003e30A\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax PV Input Voltage\u003c\/td\u003e\n \u003ctd\u003e25 VDC\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eSelf-Consumption\u003c\/td\u003e\n \u003ctd\u003e\u0026lt;10mA\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eHigh Voltage Disconnect\u003c\/td\u003e\n \u003ctd\u003e16V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBoost Duration\u003c\/td\u003e\n \u003ctd\u003e120 min\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eTemperature Compensation\u003c\/td\u003e\n \u003ctd\u003e-3mV\/°C\/2V\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWorking Temperature\u003c\/td\u003e\n \u003ctd\u003e-20°F to 113°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eStorage Temperature\u003c\/td\u003e\n \u003ctd\u003e-31°F to 176°F\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eMax Wire Gauge\u003c\/td\u003e\n \u003ctd\u003eUp to 8AWG\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eDimensions\u003c\/td\u003e\n \u003ctd\u003e6.45 x 4.31 x 1.76 inches\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eWeight\u003c\/td\u003e\n \u003ctd\u003e0.65 lbs\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n \u003ctd\u003eIP20\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eCompatible Bluetooth Module\u003c\/td\u003e\n \u003ctd\u003eRenogy BT-1 (sold separately)\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003eBattery Types Supported\u003c\/td\u003e\n \u003ctd\u003eGel, Sealed, Flooded, Lithium\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003ctr\u003e\n \u003ctd\u003ePackage Contents\u003c\/td\u003e\n \u003ctd\u003e1x Wanderer Li 30A PWM Charge Controller\u003c\/td\u003e\n \u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWho This Is For and Isn't\u003c\/h2\u003e\n\u003cp class=\"product-fit-yes\"\u003eThe Wanderer Li 30A is suited for small 12V off-grid solar systems in trailers, RVs, cabins, and boats where the PV array does not exceed 25 VDC input and the charge current requirement is 30A or less. Its lithium-optimized charging profile and five load modes make it a practical fit for builds using LiFePO4 or other lithium battery chemistries alongside conventional AGM or flooded batteries.\u003c\/p\u003e\n\u003cp class=\"product-fit-no\"\u003eThe Wanderer Li is a negative-ground, 12V-only controller and is not suited for 24V systems or positive-ground wiring configurations. The IP20 enclosure rating means it is not designed for direct exposure to moisture, dust, or outdoor installation without an enclosure. The Renogy BT-1 Bluetooth module required for wireless monitoring is not included and must be purchased separately.\u003c\/p\u003e\n\n\u003ch2\u003eCommon Questions\u003c\/h2\u003e\n\u003ch3 class=\"product-faq-q\"\u003eDoes the Wanderer Li 30A work with lithium batteries?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wanderer Li 30A PWM Charge Controller is optimized for 12V lithium batteries and also supports Gel, Sealed, and Flooded battery types. The lithium-specific charging profile manages voltage at each of the four charging stages to suit lithium chemistry, including LiFePO4 batteries commonly used in off-grid and overlanding builds.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat is the maximum solar panel input this controller can handle?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wanderer Li 30A accepts a maximum PV input voltage of 25 VDC and a rated charge current of 30A. Panels or arrays whose open-circuit voltage exceeds 25 VDC are not compatible with this controller; sizing the array within those limits is required for safe operation.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eIs wireless monitoring included, or does it require additional hardware?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wanderer Li 30A has an RS232 port that supports real-time monitoring, but wireless Bluetooth monitoring requires the Renogy BT-1 Bluetooth module, which is sold separately. With the BT-1 connected, the controller can send data to the Renogy DC Home app. The BT-1 is not included in the box with this controller.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eCan this controller be installed outdoors or in an exposed location?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wanderer Li 30A carries an IP20 enclosure rating, which provides protection against solid objects larger than 12mm but no rated protection against water or dust ingress. For installations in trailers, vans, or cabins, the controller should be mounted inside an enclosure or in a protected interior location rather than exposed directly to weather.\u003c\/p\u003e\n\u003ch3 class=\"product-faq-q\"\u003eWhat wire gauge does the Wanderer Li 30A support?\u003c\/h3\u003e\n\u003cp class=\"product-faq-a\"\u003eThe Wanderer Li 30A PWM Charge Controller accepts wire up to 8AWG on its terminals. Selecting wire gauge appropriate for the system's current load and run length, within that maximum, is the installer's responsibility; the controller does not include wiring in the package.\u003c\/p\u003e","brand":"Renogy","offers":[{"title":"Default Title","offer_id":50657003241542,"sku":"RNG-CTRL-WND30-Li-G1-US","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0691\/2203\/1686\/files\/01__88345.1734512119.1280.1280.jpg?v=1792210689"}],"url":"https:\/\/terrainvault.com\/collections\/renogy.oembed","provider":"TerrainVault","version":"1.0","type":"link"}